Re: [PATCH 5/7] dt-bindings: iio: Add binding documentation for AD7091R-8

[Krzysztof Kozlowski]

On 21/11/2023 22:36, marcelo.schmitt@xxxxxxxxxx wrote:
> From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> 
> Add device tree binding documentation for AD7091R-8.

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time, thus I will skip this patch entirely till you follow
the process allowing the patch to be tested.

Please kindly resend and include all necessary To/Cc entries.

> 
> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> ---
>  .../bindings/iio/adc/adi,ad7091r8.yaml        | 101 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
> new file mode 100644
> index 000000000000..f10b6727737f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/adi,ad7091r8.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices AD7091R8 8-Channel 12-Bit ADC
> +
> +maintainers:
> +  - Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
> +
> +description: |
> +  Analog Devices AD7091R-8 8-Channel 12-Bit ADC
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7091r2
> +      - adi,ad7091r4
> +      - adi,ad7091r8
> +
> +  reg:
> +    maxItems: 1
> +
> +  vref-supply: true
> +
> +  spi-max-frequency: true
> +
> +  adi,conversion-start-gpios:
> +    description:
> +      Device tree identifier of the CONVST pin.
> +      This logic input is used to initiate conversions on the analog
> +      input channels.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:

This goes after pattern.

> +  - compatible
> +  - reg
> +  - adi,conversion-start-gpios
> +
> +patternProperties:
> +  "^channel@[0-7]$":
> +    $ref: "adc.yaml"

You never tested this... considering that you opted-out of automated
testing, you basically send buggy code. NAK.

Best regards,
Krzysztof