[PATCH 0/7] Add support for AD7091R-2/-4/-8

[marcelo.schmitt]

From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>

This series adds support for AD7091R-2/-4/-8 ADCs which can do single shot
or sequenced readings. Threshold events are also supported.
Overall, AD7091R-2/-4/-8 are very similar to AD7091R-5 except they use SPI interface.

This has been tested with raspberrypi and eval board on kernel 6.1 from ADI fork.
Link: https://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/ad7091r8

Marcelo Schmitt (7):
  iio: adc: ad7091r-base: Set alert config and drvdata
  MAINTAINERS: Add MAINTAINERS entry for AD7091R
  iio: adc: ad7091r: Move defines to header file
  iio: adc: ad7091r: Alloc IIO device before generic probe
  dt-bindings: iio: Add binding documentation for AD7091R-8
  iio: adc: Add support for AD7091R-8
  iio: adc: ad7091r-base: Add debugfs reg access

 .../bindings/iio/adc/adi,ad7091r8.yaml        | 101 +++++++
 MAINTAINERS                                   |  12 +
 drivers/iio/adc/Kconfig                       |  16 ++
 drivers/iio/adc/Makefile                      |   4 +-
 drivers/iio/adc/ad7091r-base.c                |  98 ++++---
 drivers/iio/adc/ad7091r-base.h                |  82 +++++-
 drivers/iio/adc/ad7091r5.c                    |  55 ++--
 drivers/iio/adc/ad7091r8.c                    | 272 ++++++++++++++++++
 8 files changed, 551 insertions(+), 89 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7091r8.yaml
 create mode 100644 drivers/iio/adc/ad7091r8.c

-- 
2.42.0