[PATCH 2/4 net] qca_spi: Fix SPI IRQ handling

[Stefan Wahren]

The functions qcaspi_netdev_open/close are responsible of request &
free of the SPI interrupt, which wasn't the best choice. Currently
it's possible to trigger a double free of the interrupt by calling
qcaspi_netdev_close() after qcaspi_netdev_open() has failed.
So let us split IRQ allocation & enabling, so we can take advantage
of a device managed IRQ and also fix the issue.

Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
 drivers/net/ethernet/qualcomm/qca_spi.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index b11a998b2456..b2573eea8a7a 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c
@@ -674,7 +674,6 @@ static int
 qcaspi_netdev_open(struct net_device *dev)
 {
 	struct qcaspi *qca = netdev_priv(dev);
-	int ret = 0;

 	if (!qca)
 		return -EINVAL;
@@ -684,13 +683,7 @@ qcaspi_netdev_open(struct net_device *dev)
 	qca->sync = QCASPI_SYNC_UNKNOWN;
 	qcafrm_fsm_init_spi(&qca->frm_handle);

-	ret = request_irq(qca->spi_dev->irq, qcaspi_intr_handler, 0,
-			  dev->name, qca);
-	if (ret) {
-		netdev_err(dev, "%s: unable to get IRQ %d (irqval=%d).\n",
-			   QCASPI_DRV_NAME, qca->spi_dev->irq, ret);
-		return ret;
-	}
+	enable_irq(qca->spi_dev->irq);

 	/* SPI thread takes care of TX queue */
 	kthread_unpark(qca->spi_thread);
@@ -707,7 +700,7 @@ qcaspi_netdev_close(struct net_device *dev)
 	netif_stop_queue(dev);

 	qcaspi_write_register(qca, SPI_REG_INTR_ENABLE, 0, wr_verify);
-	free_irq(qca->spi_dev->irq, qca);
+	disable_irq(qca->spi_dev->irq);

 	kthread_park(qca->spi_thread);
 	qcaspi_flush_tx_ring(qca);
@@ -977,6 +970,15 @@ qca_spi_probe(struct spi_device *spi)

 	spi_set_drvdata(spi, qcaspi_devs);

+	ret = devm_request_irq(&spi->dev, spi->irq, qcaspi_intr_handler,
+			       IRQF_NO_AUTOEN, qca->net_dev->name, qca);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to get IRQ %d (irqval=%d).\n",
+			spi->irq, ret);
+		free_netdev(qcaspi_devs);
+		return ret;
+	}
+
 	ret = of_get_ethdev_address(spi->dev.of_node, qca->net_dev);
 	if (ret) {
 		eth_hw_addr_random(qca->net_dev);
--
2.34.1