Re: [PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes

From: Dmitry Baryshkov
Date: Tue Nov 21 2023 - 06:24:31 EST

Next message: Greg KH: "Re: [PATCH] USB: serial: option: add Luat Air72*U series products"
Previous message: Alistair Popple: "Re: [PATCH v2 12/14] arm64/mm: Wire up PTE_CONT for user mappings"
In reply to: Neil Armstrong: "[PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes"
Next in thread: Neil Armstrong: "Re: [PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 21 Nov 2023 at 13:00, Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote:
>
> Add Hardware nodes that depends on an interconnect property to
> be valid.
>
> The includes:
> - all QUP i2s/spi nodes
> - PCIe
> - UFS
> - SDHCI
> - Display
> - HWMON
>
> Acked-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8650.dtsi | 3467 +++++++++++++++++++++++++++++++---
> 1 file changed, 3206 insertions(+), 261 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> index e6a862230c30..8e21335073bc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
> @@ -11,6 +11,8 @@
> #include <dt-bindings/dma/qcom-gpi.h>
> #include <dt-bindings/firmware/qcom,scm.h>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/mailbox/qcom-ipcc.h>
> #include <dt-bindings/phy/phy-qcom-qmp.h>
> @@ -57,6 +59,11 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
> clock-mult = <1>;
> clock-div = <2>;
> };
> +
> + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };

I think this clock is provided by the PHY. Let's attribute it this way.

> };
>
> cpus {
> @@ -363,9 +370,23 @@ CLUSTER_SLEEP_1: cluster-sleep-1 {
> firmware {
> scm: scm {
> compatible = "qcom,scm-sm8650", "qcom,scm";
> + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> };
> };
>
> + clk_virt: interconnect-0 {
> + compatible = "qcom,sm8650-clk-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + mc_virt: interconnect-1 {
> + compatible = "qcom,sm8650-mc-virt";
> + #interconnect-cells = <2>;
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> memory@a0000000 {
> device_type = "memory";
> /* We expect the bootloader to fill in the size */
> @@ -626,6 +647,95 @@ llcc_lpi_mem: llcc-lpi@ff800000 {
> };
> };
>
> + smp2p-adsp {
> + compatible = "qcom,smp2p";
> +
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,smem = <443>, <429>;
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <2>;
> +
> + smp2p_adsp_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_adsp_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-cdsp {
> + compatible = "qcom,smp2p";
> +
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,smem = <94>, <432>;
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <5>;
> +
> + smp2p_cdsp_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_cdsp_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + smp2p-modem {
> + compatible = "qcom,smp2p";
> +
> + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_SMP2P
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_SMP2P>;
> +
> + qcom,smem = <435>, <428>;
> + qcom,local-pid = <0>;
> + qcom,remote-pid = <1>;
> +
> + smp2p_modem_out: master-kernel {
> + qcom,entry-name = "master-kernel";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + smp2p_modem_in: slave-kernel {
> + qcom,entry-name = "slave-kernel";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> +
> + ipa_smp2p_out: ipa-ap-to-modem {
> + qcom,entry-name = "ipa";
> + #qcom,smem-state-cells = <1>;
> + };
> +
> + ipa_smp2p_in: ipa-modem-to-ap {
> + qcom,entry-name = "ipa";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> soc: soc@0 {
> compatible = "simple-bus";
>
> @@ -641,13 +751,13 @@ gcc: clock-controller@100000 {
> clocks = <&bi_tcxo_div2>,
> <&bi_tcxo_ao_div2>,
> <&sleep_clk>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>;
> + <&pcie0_phy>,
> + <&pcie1_phy>,
> + <&pcie_1_phy_aux_clk>,
> + <&ufs_mem_phy 0>,
> + <&ufs_mem_phy 1>,
> + <&ufs_mem_phy 2>,
> + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>;
>
> #clock-cells = <1>;
> #reset-cells = <1>;
> @@ -712,234 +822,2310 @@ qupv3_id_1: geniqup@8c0000 {
>
> status = "disabled";
>
> - uart15: serial@89c000 {
> - compatible = "qcom,geni-debug-uart";
> - reg = <0 0x0089c000 0 0x4000>;

I think, git diff got it wrong here. Is there any chance we can help it?

> + i2c8: i2c@880000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00880000 0 0x4000>;
>
> - interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
>
> - clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> clock-names = "se";
>
> - pinctrl-0 = <&qup_uart15_default>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c8_data_clk>;
> pinctrl-names = "default";
>
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> status = "disabled";
> };
> - };
>
> - gpi_dma1: dma-controller@a00000 {
> - compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
> - reg = <0 0x00a00000 0 0x60000>;
> + spi8: spi@880000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00880000 0 0x4000>;
>
> - interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
>
> - dma-channels = <12>;
> - dma-channel-mask = <0xc>;
> - #dma-cells = <3>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> + clock-names = "se";
>
> - iommus = <&apps_smmu 0xb6 0>;
> - dma-coherent;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
> + pinctrl-names = "default";
>
> - status = "disabled";
> - };
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - rng: rng@10c3000 {
> - compatible = "qcom,sm8650-trng", "qcom,trng";
> - reg = <0 0x010c3000 0 0x1000>;
> - };
> + status = "disabled";
> + };
>
> - ice: crypto@1d88000 {
> - compatible = "qcom,sm8650-inline-crypto-engine",
> - "qcom,inline-crypto-engine";
> - reg = <0 0x01d88000 0 0x8000>;
> + i2c9: i2c@884000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00884000 0 0x4000>;
>
> - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> - };
> + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
>
> - tcsr_mutex: hwlock@1f40000 {
> - compatible = "qcom,tcsr-mutex";
> - reg = <0 0x01f40000 0 0x20000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> + clock-names = "se";
>
> - #hwlock-cells = <1>;
> - };
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c9_data_clk>;
> + pinctrl-names = "default";
>
> - tcsr: clock-controller@1fc0000 {
> - compatible = "qcom,sm8650-tcsr", "syscon";
> - reg = <0 0x01fc0000 0 0xa0000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - clocks = <&rpmhcc RPMH_CXO_CLK>;
> + status = "disabled";
> + };
>
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - };
> + spi9: spi@884000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00884000 0 0x4000>;
>
> - gpucc: clock-controller@3d90000 {
> - compatible = "qcom,sm8650-gpucc";
> - reg = <0 0x03d90000 0 0xa000>;
> + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
>
> - clocks = <&bi_tcxo_div2>,
> - <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> + clock-names = "se";
>
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> - };
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
> + pinctrl-names = "default";
>
> - dispcc: clock-controller@af00000 {
> - compatible = "qcom,sm8650-dispcc";
> - reg = <0 0x0af00000 0 0x20000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - clocks = <&bi_tcxo_div2>,
> - <&bi_tcxo_ao_div2>,
> - <&gcc GCC_DISP_AHB_CLK>,
> - <&sleep_clk>,
> - <0>, /* dsi0 */
> - <0>,
> - <0>, /* dsi1 */
> - <0>,
> - <0>, /* dp0 */
> - <0>,
> - <0>, /* dp1 */
> - <0>,
> - <0>, /* dp2 */
> - <0>,
> - <0>, /* dp3 */
> - <0>;
> + status = "disabled";
> + };
>
> - power-domains = <&rpmhpd RPMHPD_MMCX>;
> - required-opps = <&rpmhpd_opp_low_svs>;
> + i2c10: i2c@888000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00888000 0 0x4000>;
>
> - #clock-cells = <1>;
> - #reset-cells = <1>;
> - #power-domain-cells = <1>;
> + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
>
> - status = "disabled";
> - };
> + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> + clock-names = "se";
>
> - usb_1_hsphy: phy@88e3000 {
> - compatible = "qcom,sm8650-snps-eusb2-phy",
> - "qcom,sm8550-snps-eusb2-phy";
> - reg = <0 0x088e3000 0 0x154>;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c10_data_clk>;
> + pinctrl-names = "default";
>
> - clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
> - clock-names = "ref";
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> + status = "disabled";
> + };
>
> - #phy-cells = <0>;
> + spi10: spi@888000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00888000 0 0x4000>;
>
> - status = "disabled";
> - };
> + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
>
> - usb_dp_qmpphy: phy@88e8000 {
> - compatible = "qcom,sm8650-qmp-usb3-dp-phy";
> - reg = <0 0x088e8000 0 0x3000>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> + clock-names = "se";
>
> - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> - <&rpmhcc RPMH_CXO_CLK>,
> - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> - clock-names = "aux",
> - "ref",
> - "com_aux",
> - "usb3_pipe";
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
> + pinctrl-names = "default";
>
> - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> - <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> - reset-names = "phy",
> - "common";
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - power-domains = <&gcc USB3_PHY_GDSC>;
> + status = "disabled";
> + };
>
> - #clock-cells = <1>;
> - #phy-cells = <1>;
> + i2c11: i2c@88c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x0088c000 0 0x4000>;
>
> - status = "disabled";
> - };
> + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
>
> - usb_1: usb@a6f8800 {
> - compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
> - reg = <0 0x0a6f8800 0 0x400>;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> + clock-names = "se";
>
> - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
> - <&pdc 15 IRQ_TYPE_EDGE_RISING>,
> - <&pdc 14 IRQ_TYPE_EDGE_RISING>;
> - interrupt-names = "hs_phy_irq",
> - "ss_phy_irq",
> - "dm_hs_phy_irq",
> - "dp_hs_phy_irq";
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c11_data_clk>;
> + pinctrl-names = "default";
>
> - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> - <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> - <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> - <&tcsr TCSR_USB3_CLKREF_EN>;
> - clock-names = "cfg_noc",
> - "core",
> - "iface",
> - "sleep",
> - "mock_utmi",
> - "xo";
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> - <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> - assigned-clock-rates = <19200000>, <200000000>;
> + status = "disabled";
> + };
>
> - resets = <&gcc GCC_USB30_PRIM_BCR>;
> + spi11: spi@88c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x0088c000 0 0x4000>;
>
> - power-domains = <&gcc USB30_PRIM_GDSC>;
> - required-opps = <&rpmhpd_opp_nom>;
> + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
>
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> + clock-names = "se";
>
> - status = "disabled";
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
> + pinctrl-names = "default";
>
> - usb_1_dwc3: usb@a600000 {
> - compatible = "snps,dwc3";
> - reg = <0 0x0a600000 0 0xcd00>;
> + #address-cells = <1>;
> + #size-cells = <0>;
>
> - interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
>
> - iommus = <&apps_smmu 0x40 0>;
> + i2c12: i2c@890000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00890000 0 0x4000>;
>
> - phys = <&usb_1_hsphy>,
> - <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
> - phy-names = "usb2-phy",
> - "usb3-phy";
> + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
>
> - snps,hird-threshold = /bits/ 8 <0x0>;
> - snps,usb2-gadget-lpm-disable;
> - snps,dis_u2_susphy_quirk;
> - snps,dis_enblslpm_quirk;
> - snps,dis-u1-entry-quirk;
> - snps,dis-u2-entry-quirk;
> - snps,is-utmi-l1-suspend;
> - snps,usb3_lpm_capable;
> - snps,usb2-lpm-disable;
> - snps,has-lpm-erratum;
> - tx-fifo-resize;
> + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> + clock-names = "se";
>
> - dma-coherent;
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c12_data_clk>;
> + pinctrl-names = "default";
>
> - ports {
> - #address-cells = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi12: spi@890000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00890000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c13: i2c@894000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00894000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma2 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c13_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi13: spi@894000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00894000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma2 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + uart14: serial@898000 {
> + compatible = "qcom,geni-uart";
> + reg = <0 0x00898000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
> + pinctrl-names = "default";
> +
> + status = "disabled";
> + };
> +
> + uart15: serial@89c000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0 0x0089c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&qup_uart15_default>;
> + pinctrl-names = "default";
> +
> + status = "disabled";
> + };
> + };
> +
> + i2c_master_hub_0: geniqup@9c0000 {
> + compatible = "qcom,geni-se-i2c-master-hub";
> + reg = <0 0x009c0000 0 0x2000>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>;
> + clock-names = "s-ahb";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> +
> + i2c_hub_0: i2c@980000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00980000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c0_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_1: i2c@984000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00984000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c1_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_2: i2c@988000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00988000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c2_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_3: i2c@98c000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x0098c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c3_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_4: i2c@990000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00990000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c4_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_5: i2c@994000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00994000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c5_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_6: i2c@998000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x00998000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c6_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_7: i2c@99c000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x0099c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c7_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_8: i2c@9a0000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x009a0000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c8_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c_hub_9: i2c@9a4000 {
> + compatible = "qcom,geni-i2c-master-hub";
> + reg = <0 0x009a4000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>,
> + <&gcc GCC_QUPV3_I2C_CORE_CLK>;
> + clock-names = "se",
> + "core";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config";
> +
> + pinctrl-0 = <&hub_i2c9_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> + };
> +
> + gpi_dma1: dma-controller@a00000 {
> + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma";
> + reg = <0 0x00a00000 0 0x60000>;
> +
> + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
> +
> + dma-channels = <12>;
> + dma-channel-mask = <0xc>;
> + #dma-cells = <3>;
> +
> + iommus = <&apps_smmu 0xb6 0>;
> + dma-coherent;
> +
> + status = "disabled";
> + };
> +
> + qupv3_id_0: geniqup@ac0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0 0x00ac0000 0 0x2000>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
> + clock-names = "m-ahb",
> + "s-ahb";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core";
> +
> + iommus = <&apps_smmu 0xa3 0>;
> +
> + dma-coherent;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> +
> + i2c0: i2c@a80000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a80000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 0 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c0_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi0: spi@a80000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a80000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 0 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c1: i2c@a84000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a84000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 1 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c1_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi1: spi@a84000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a84000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 1 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c2: i2c@a88000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a88000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 2 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c2_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi2: spi@a88000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a88000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 2 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c3: i2c@a8c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a8c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 3 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c3_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi3: spi@a8c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a8c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 3 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c4: i2c@a90000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a90000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 4 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c4_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi4: spi@a90000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a90000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 4 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c5: i2c@a94000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a94000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 5 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c5_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi5: spi@a94000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a94000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 5 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c6: i2c@a98000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a98000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 6 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c6_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi6: spi@a98000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a98000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 6 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + i2c7: i2c@a9c000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a9c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
> + <&gpi_dma1 1 7 QCOM_GPI_I2C>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_i2c7_data_clk>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + spi7: spi@a9c000 {
> + compatible = "qcom,geni-spi";
> + reg = <0 0x00a9c000 0 0x4000>;
> +
> + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
> + clock-names = "se";
> +
> + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
> + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
> + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "qup-core",
> + "qup-config",
> + "qup-memory";
> +
> + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
> + <&gpi_dma1 1 7 QCOM_GPI_SPI>;
> + dma-names = "tx",
> + "rx";
> +
> + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
> + pinctrl-names = "default";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> + };
> + };
> +
> + cnoc_main: interconnect@1500000 {
> + compatible = "qcom,sm8650-cnoc-main";
> + reg = <0 0x01500000 0 0x14080>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + config_noc: interconnect@1600000 {
> + compatible = "qcom,sm8650-config-noc";
> + reg = <0 0x01600000 0 0x6200>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + system_noc: interconnect@1680000 {
> + compatible = "qcom,sm8650-system-noc";
> + reg = <0 0x01680000 0 0x1d080>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + pcie_noc: interconnect@16c0000 {
> + compatible = "qcom,sm8650-pcie-anoc";
> + reg = <0 0x016c0000 0 0x12200>;
> +
> + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + aggre1_noc: interconnect@16e0000 {
> + compatible = "qcom,sm8650-aggre1-noc";
> + reg = <0 0x016e0000 0 0x16400>;
> +
> + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + aggre2_noc: interconnect@1700000 {
> + compatible = "qcom,sm8650-aggre2-noc";
> + reg = <0 0x01700000 0 0x1e400>;
> +
> + clocks = <&rpmhcc RPMH_IPA_CLK>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + mmss_noc: interconnect@1780000 {
> + compatible = "qcom,sm8650-mmss-noc";
> + reg = <0 0x01780000 0 0x5b800>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + rng: rng@10c3000 {
> + compatible = "qcom,sm8650-trng", "qcom,trng";
> + reg = <0 0x010c3000 0 0x1000>;
> + };
> +
> + pcie0: pci@1c00000 {
> + device_type = "pci";
> + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
> + reg = <0 0x01c00000 0 0x3000>,
> + <0 0x60000000 0 0xf1d>,
> + <0 0x60000f20 0 0xa8>,
> + <0 0x60001000 0 0x1000>,
> + <0 0x60100000 0 0x100000>;
> + reg-names = "parf", "dbi", "elbi", "atu", "config";
> +
> + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> +
> + clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> + <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
> + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "ddrss_sf_tbu",
> + "noc_aggr",
> + "cnoc_sf_axi";
> +
> + resets = <&gcc GCC_PCIE_0_BCR>;
> + reset-names = "pci";
> +
> + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "pcie-mem",
> + "cpu-pcie";
> +
> + power-domains = <&gcc PCIE_0_GDSC>;
> +
> + iommu-map = <0 &apps_smmu 0x1400 0x1>,
> + <0x100 &apps_smmu 0x1401 0x1>;
> +
> + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + #interrupt-cells = <1>;
> +
> + linux,pci-domain = <0>;
> + num-lanes = <2>;
> + bus-range = <0 0xff>;
> +
> + phys = <&pcie0_phy>;
> + phy-names = "pciephy";
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>,
> + <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>;
> +
> + dma-coherent;
> +
> + status = "disabled";
> + };
> +
> + pcie0_phy: phy@1c06000 {
> + compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy";
> + reg = <0 0x01c06000 0 0x2000>;
> +
> + clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
> + <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
> + <&tcsr TCSR_PCIE_0_CLKREF_EN>,
> + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
> + <&gcc GCC_PCIE_0_PIPE_CLK>;
> + clock-names = "aux",
> + "cfg_ahb",
> + "ref",
> + "rchng",
> + "pipe";
> +
> + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
> + assigned-clock-rates = <100000000>;
> +
> + resets = <&gcc GCC_PCIE_0_PHY_BCR>;
> + reset-names = "phy";
> +
> + power-domains = <&gcc PCIE_0_PHY_GDSC>;
> +
> + #clock-cells = <0>;
> + clock-output-names = "pcie0_pipe_clk";
> +
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + pcie1: pci@1c08000 {
> + device_type = "pci";
> + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
> + reg = <0 0x01c08000 0 0x3000>,
> + <0 0x40000000 0 0xf1d>,
> + <0 0x40000f20 0 0xa8>,
> + <0 0x40001000 0 0x1000>,
> + <0 0x40100000 0 0x100000>;
> + reg-names = "parf",
> + "dbi",
> + "elbi",
> + "atu",
> + "config";
> +
> + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "msi";
> +
> + clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
> + <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
> + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
> + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
> + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
> + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
> + clock-names = "aux",
> + "cfg",
> + "bus_master",
> + "bus_slave",
> + "slave_q2a",
> + "ddrss_sf_tbu",
> + "noc_aggr",
> + "cnoc_sf_axi";
> +
> + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + resets = <&gcc GCC_PCIE_1_BCR>,
> + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
> + reset-names = "pci",
> + "link_down";
> +
> + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "pcie-mem",
> + "cpu-pcie";
> +
> + power-domains = <&gcc PCIE_1_GDSC>;
> +
> + iommu-map = <0 &apps_smmu 0x1480 0x1>,
> + <0x100 &apps_smmu 0x1481 0x1>;
> +
> + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
> + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-map-mask = <0 0 0 0x7>;
> + #interrupt-cells = <1>;
> +
> + linux,pci-domain = <1>;
> + num-lanes = <2>;
> + bus-range = <0 0xff>;
> +
> + phys = <&pcie1_phy>;
> + phy-names = "pciephy";
> +
> + dma-coherent;
> +
> + #address-cells = <3>;
> + #size-cells = <2>;
> + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>,
> + <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>;
> +
> + status = "disabled";
> + };
> +
> + pcie1_phy: phy@1c0e000 {
> + compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy";
> + reg = <0 0x01c0e000 0 0x2000>;
> +
> + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
> + <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
> + <&tcsr TCSR_PCIE_1_CLKREF_EN>,
> + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
> + <&gcc GCC_PCIE_1_PIPE_CLK>;
> + clock-names = "aux",
> + "cfg_ahb",
> + "ref",
> + "rchng",
> + "pipe";
> +
> + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
> + assigned-clock-rates = <100000000>;
> +
> + resets = <&gcc GCC_PCIE_1_PHY_BCR>,
> + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>;
> + reset-names = "phy",
> + "phy_nocsr";
> +
> + power-domains = <&gcc PCIE_1_PHY_GDSC>;
> +
> + #clock-cells = <0>;
> + clock-output-names = "pcie1_pipe_clk";
> +
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + cryptobam: dma-controller@1dc4000 {
> + compatible = "qcom,bam-v1.7.0";
> + reg = <0 0x01dc4000 0 0x28000>;
> +
> + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> +
> + #dma-cells = <1>;
> +
> + iommus = <&apps_smmu 0x480 0>,
> + <&apps_smmu 0x481 0>;
> +
> + qcom,ee = <0>;
> + qcom,controlled-remotely;
> + };
> +
> + crypto: crypto@1dfa000 {
> + compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
> + reg = <0 0x01dfa000 0 0x6000>;
> +
> + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "memory";
> +
> + dmas = <&cryptobam 4>, <&cryptobam 5>;
> + dma-names = "rx", "tx";
> +
> + iommus = <&apps_smmu 0x480 0>,
> + <&apps_smmu 0x481 0>;
> + };
> +
> + ufs_mem_phy: phy@1d80000 {
> + compatible = "qcom,sm8650-qmp-ufs-phy";
> + reg = <0 0x01d80000 0 0x2000>;
> +
> + clocks = <&tcsr TCSR_UFS_CLKREF_EN>,
> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
> + clock-names = "ref",
> + "ref_aux";
> +
> + resets = <&ufs_mem_hc 0>;
> + reset-names = "ufsphy";
> +
> + power-domains = <&gcc UFS_MEM_PHY_GDSC>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + ufs_mem_hc: ufs@1d84000 {
> + compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
> + reg = <0 0x01d84000 0 0x3000>;
> +
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
> + <&gcc GCC_UFS_PHY_AHB_CLK>,
> + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
> + <&tcsr TCSR_UFS_PAD_CLKREF_EN>,
> + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
> + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
> + clock-names = "core_clk",
> + "bus_aggr_clk",
> + "iface_clk",
> + "core_clk_unipro",
> + "ref_clk",
> + "tx_lane0_sync_clk",
> + "rx_lane0_sync_clk",
> + "rx_lane1_sync_clk";
> + freq-table-hz = <100000000 403000000>,
> + <0 0>,
> + <0 0>,
> + <100000000 403000000>,
> + <100000000 403000000>,
> + <0 0>,
> + <0 0>,
> + <0 0>;
> +
> + resets = <&gcc GCC_UFS_PHY_BCR>;
> + reset-names = "rst";
> +
> + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "ufs-ddr",
> + "cpu-ufs";
> +
> + power-domains = <&gcc UFS_PHY_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + iommus = <&apps_smmu 0x60 0>;
> +
> + lanes-per-direction = <2>;
> + qcom,ice = <&ice>;
> +
> + phys = <&ufs_mem_phy>;
> + phy-names = "ufsphy";
> +
> + #reset-cells = <1>;
> +
> + status = "disabled";
> + };
> +
> + ice: crypto@1d88000 {
> + compatible = "qcom,sm8650-inline-crypto-engine",
> + "qcom,inline-crypto-engine";
> + reg = <0 0x01d88000 0 0x8000>;
> +
> + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
> + };
> +
> + tcsr_mutex: hwlock@1f40000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0 0x01f40000 0 0x20000>;
> +
> + #hwlock-cells = <1>;
> + };
> +
> + tcsr: clock-controller@1fc0000 {
> + compatible = "qcom,sm8650-tcsr", "syscon";
> + reg = <0 0x01fc0000 0 0xa0000>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + gpucc: clock-controller@3d90000 {
> + compatible = "qcom,sm8650-gpucc";
> + reg = <0 0x03d90000 0 0xa000>;
> +
> + clocks = <&bi_tcxo_div2>,
> + <&gcc GCC_GPU_GPLL0_CLK_SRC>,
> + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + };
> +
> + remoteproc_mpss: remoteproc@4080000 {
> + compatible = "qcom,sm8650-mpss-pas";
> + reg = <0 0x04080000 0 0x4040>;
> +
> + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack",
> + "shutdown-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MSS>;
> + power-domain-names = "cx",
> + "mss";
> +
> + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>,
> + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_modem_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_MPSS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + qcom,remote-pid = <1>;
> +
> + label = "mpss";
> + };
> + };
> +
> + lpass_lpiaon_noc: interconnect@7400000 {
> + compatible = "qcom,sm8650-lpass-lpiaon-noc";
> + reg = <0 0x07400000 0 0x19080>;
> +
> + #interconnect-cells = <2>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + lpass_lpicx_noc: interconnect@7430000 {
> + compatible = "qcom,sm8650-lpass-lpicx-noc";
> + reg = <0 0x07430000 0 0x3a200>;
> +
> + #interconnect-cells = <2>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + lpass_ag_noc: interconnect@7e40000 {
> + compatible = "qcom,sm8650-lpass-ag-noc";
> + reg = <0 0x07e40000 0 0xe080>;
> +
> + #interconnect-cells = <2>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> + };
> +
> + sdhc_2: mmc@8804000 {
> + compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0 0x08804000 0 0x1000>;
> +
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq",
> + "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> + <&gcc GCC_SDCC2_APPS_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface",
> + "core",
> + "xo";
> +
> + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
> + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "sdhc-ddr",
> + "cpu-sdhc";
> +
> + power-domains = <&rpmhpd RPMHPD_CX>;
> + operating-points-v2 = <&sdhc2_opp_table>;
> +
> + iommus = <&apps_smmu 0x540 0>;
> +
> + bus-width = <4>;
> +
> + /* Forbid SDR104/SDR50 - broken hw! */
> + sdhci-caps-mask = <0x3 0>;
> +
> + qcom,dll-config = <0x0007642c>;
> + qcom,ddr-config = <0x80040868>;
> +
> + dma-coherent;
> +
> + status = "disabled";
> +
> + sdhc2_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-19200000 {
> + opp-hz = /bits/ 64 <19200000>;
> + required-opps = <&rpmhpd_opp_min_svs>;
> + };
> +
> + opp-50000000 {
> + opp-hz = /bits/ 64 <50000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-100000000 {
> + opp-hz = /bits/ 64 <100000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-202000000 {
> + opp-hz = /bits/ 64 <202000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
> +
> + mdss: display-subsystem@ae00000 {
> + compatible = "qcom,sm8650-mdss";
> + reg = <0 0x0ae00000 0 0x1000>;
> + reg-names = "mdss";
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> +
> + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
> +
> + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
> + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>,
> + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "mdp0-mem",
> + "mdp1-mem";
> +
> + power-domains = <&dispcc MDSS_GDSC>;
> +
> + iommus = <&apps_smmu 0x1c00 0x2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> +
> + mdss_mdp: display-controller@ae01000 {
> + compatible = "qcom,sm8650-dpu";
> + reg = <0 0x0ae01000 0 0x8f000>,
> + <0 0x0aeb0000 0 0x2008>;
> + reg-names = "mdp",
> + "vbif";
> +
> + interrupts-extended = <&mdss 0>;
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "nrt_bus",
> + "iface",
> + "lut",
> + "core",
> + "vsync";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + assigned-clock-rates = <19200000>;
> +
> + operating-points-v2 = <&mdp_opp_table>;
> +
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + dpu_intf1_out: endpoint {
> + remote-endpoint = <&mdss_dsi0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + dpu_intf2_out: endpoint {
> + remote-endpoint = <&mdss_dsi1_in>;
> + };
> + };
> + };
> +
> + mdp_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-325000000 {
> + opp-hz = /bits/ 64 <325000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-375000000 {
> + opp-hz = /bits/ 64 <375000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-514000000 {
> + opp-hz = /bits/ 64 <514000000>;
> + required-opps = <&rpmhpd_opp_nom>;
> + };
> + };
> + };
> +
> + mdss_dsi0: dsi@ae94000 {
> + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae94000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupts-extended = <&mdss 4>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC0_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi0_phy 0>,
> + <&mdss_dsi0_phy 1>;
> +
> + operating-points-v2 = <&mdss_dsi_opp_table>;
> +
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + phys = <&mdss_dsi0_phy>;
> + phy-names = "dsi";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + mdss_dsi0_in: endpoint {
> + remote-endpoint = <&dpu_intf1_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + mdss_dsi0_out: endpoint {
> + };
> + };
> + };
> +
> + mdss_dsi_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-187500000 {
> + opp-hz = /bits/ 64 <187500000>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + required-opps = <&rpmhpd_opp_svs>;
> + };
> +
> + opp-358000000 {
> + opp-hz = /bits/ 64 <358000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>;
> + };
> + };
> + };
> +
> + mdss_dsi0_phy: phy@ae95000 {
> + compatible = "qcom,sm8650-dsi-phy-4nm";
> + reg = <0 0x0ae95000 0 0x200>,
> + <0 0x0ae95200 0 0x280>,
> + <0 0x0ae95500 0 0x400>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface",
> + "ref";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + mdss_dsi1: dsi@ae96000 {
> + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl";
> + reg = <0 0x0ae96000 0 0x400>;
> + reg-names = "dsi_ctrl";
> +
> + interrupts-extended = <&mdss 5>;
> +
> + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
> + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
> + <&dispcc DISP_CC_MDSS_ESC1_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>;
> + clock-names = "byte",
> + "byte_intf",
> + "pixel",
> + "core",
> + "iface",
> + "bus";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
> + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
> + assigned-clock-parents = <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>;
> +
> + operating-points-v2 = <&mdss_dsi_opp_table>;
> +
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> +
> + phys = <&mdss_dsi1_phy>;
> + phy-names = "dsi";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + status = "disabled";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + mdss_dsi1_in: endpoint {
> + remote-endpoint = <&dpu_intf2_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> +
> + mdss_dsi1_out: endpoint {
> + };
> + };
> + };
> + };
> +
> + mdss_dsi1_phy: phy@ae97000 {
> + compatible = "qcom,sm8650-dsi-phy-4nm";
> + reg = <0 0x0ae97000 0 0x200>,
> + <0 0x0ae97200 0 0x280>,
> + <0 0x0ae97500 0 0x400>;
> + reg-names = "dsi_phy",
> + "dsi_phy_lane",
> + "dsi_pll";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "iface",
> + "ref";
> +
> + #clock-cells = <1>;
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> + };
> +
> + dispcc: clock-controller@af00000 {
> + compatible = "qcom,sm8650-dispcc";
> + reg = <0 0x0af00000 0 0x20000>;
> +
> + clocks = <&bi_tcxo_div2>,
> + <&bi_tcxo_ao_div2>,
> + <&gcc GCC_DISP_AHB_CLK>,
> + <&sleep_clk>,
> + <&mdss_dsi0_phy 0>,
> + <&mdss_dsi0_phy 1>,
> + <&mdss_dsi1_phy 0>,
> + <&mdss_dsi1_phy 1>,
> + <0>, /* dp0 */
> + <0>,
> + <0>, /* dp1 */
> + <0>,
> + <0>, /* dp2 */
> + <0>,
> + <0>, /* dp3 */
> + <0>;
> +
> + power-domains = <&rpmhpd RPMHPD_MMCX>;
> + required-opps = <&rpmhpd_opp_low_svs>;
> +
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> +
> + status = "disabled";
> + };
> +
> + usb_1_hsphy: phy@88e3000 {
> + compatible = "qcom,sm8650-snps-eusb2-phy",
> + "qcom,sm8550-snps-eusb2-phy";
> + reg = <0 0x088e3000 0 0x154>;
> +
> + clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
> + clock-names = "ref";
> +
> + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +
> + #phy-cells = <0>;
> +
> + status = "disabled";
> + };
> +
> + usb_dp_qmpphy: phy@88e8000 {
> + compatible = "qcom,sm8650-qmp-usb3-dp-phy";
> + reg = <0 0x088e8000 0 0x3000>;
> +
> + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
> + <&rpmhcc RPMH_CXO_CLK>,
> + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> + clock-names = "aux",
> + "ref",
> + "com_aux",
> + "usb3_pipe";
> +
> + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
> + reset-names = "phy",
> + "common";
> +
> + power-domains = <&gcc USB3_PHY_GDSC>;
> +
> + #clock-cells = <1>;
> + #phy-cells = <1>;
> +
> + status = "disabled";
> + };
> +
> + usb_1: usb@a6f8800 {
> + compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
> + reg = <0 0x0a6f8800 0 0x400>;
> +
> + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>,
> + <&pdc 15 IRQ_TYPE_EDGE_RISING>,
> + <&pdc 14 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "hs_phy_irq",
> + "ss_phy_irq",
> + "dm_hs_phy_irq",
> + "dp_hs_phy_irq";
> +
> + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> + <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&tcsr TCSR_USB3_CLKREF_EN>;
> + clock-names = "cfg_noc",
> + "core",
> + "iface",
> + "sleep",
> + "mock_utmi",
> + "xo";
> +
> + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> + <&gcc GCC_USB30_PRIM_MASTER_CLK>;
> + assigned-clock-rates = <19200000>, <200000000>;
> +
> + resets = <&gcc GCC_USB30_PRIM_BCR>;
> +
> + power-domains = <&gcc USB30_PRIM_GDSC>;
> + required-opps = <&rpmhpd_opp_nom>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + status = "disabled";
> +
> + usb_1_dwc3: usb@a600000 {
> + compatible = "snps,dwc3";
> + reg = <0 0x0a600000 0 0xcd00>;
> +
> + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +
> + iommus = <&apps_smmu 0x40 0>;
> +
> + phys = <&usb_1_hsphy>,
> + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
> + phy-names = "usb2-phy",
> + "usb3-phy";
> +
> + snps,hird-threshold = /bits/ 8 <0x0>;
> + snps,usb2-gadget-lpm-disable;
> + snps,dis_u2_susphy_quirk;
> + snps,dis_enblslpm_quirk;
> + snps,dis-u1-entry-quirk;
> + snps,dis-u2-entry-quirk;
> + snps,is-utmi-l1-suspend;
> + snps,usb3_lpm_capable;
> + snps,usb2-lpm-disable;
> + snps,has-lpm-erratum;
> + tx-fifo-resize;
> +
> + dma-coherent;
> +
> + ports {
> + #address-cells = <1>;
> #size-cells = <0>;
>
> port@0 {
> @@ -969,115 +3155,602 @@ pdc: interrupt-controller@b220000 {
> <125 63 1>, <126 716 12>,
> <138 251 5>, <143 244 4>;
>
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - };
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + };
> +
> + tsens0: thermal-sensor@c228000 {
> + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> + reg = <0 0x0c228000 0 0x1000>, /* TM */
> + <0 0x0c222000 0 0x1000>; /* SROT */
> +
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow",
> + "critical";
> +
> + #qcom,sensors = <15>;
> +
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens1: thermal-sensor@c229000 {
> + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> + reg = <0 0x0c229000 0 0x1000>, /* TM */
> + <0 0x0c223000 0 0x1000>; /* SROT */
> +
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow",
> + "critical";
> +
> + #qcom,sensors = <16>;
> +
> + #thermal-sensor-cells = <1>;
> + };
> +
> + tsens2: thermal-sensor@c22a000 {
> + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> + reg = <0 0x0c22a000 0 0x1000>, /* TM */
> + <0 0x0c224000 0 0x1000>; /* SROT */
> +
> + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow",
> + "critical";
> +
> + #qcom,sensors = <13>;
> +
> + #thermal-sensor-cells = <1>;
> + };
> +
> + aoss_qmp: power-management@c300000 {
> + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
> + reg = <0 0x0c300000 0 0x400>;
> +
> + interrupt-parent = <&ipcc>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + #clock-cells = <0>;
> + };
> +
> + sram@c3f0000 {
> + compatible = "qcom,rpmh-stats";
> + reg = <0 0x0c3f0000 0 0x400>;
> + };
> +
> + spmi_bus: spmi@c400000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0 0x0c400000 0 0x3000>,
> + <0 0x0c500000 0 0x4000000>,
> + <0 0x0c440000 0 0x80000>,
> + <0 0x0c4c0000 0 0x20000>,
> + <0 0x0c42d000 0 0x4000>;
> + reg-names = "core",
> + "chnls",
> + "obsrvr",
> + "intr",
> + "cnfg";
> +
> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "periph_irq";
> +
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + qcom,bus-id = <0>;
> +
> + interrupt-controller;
> + #interrupt-cells = <4>;
> +
> + #address-cells = <2>;
> + #size-cells = <0>;
> + };
> +
> + tlmm: pinctrl@f100000 {
> + compatible = "qcom,sm8650-tlmm";
> + reg = <0 0x0f100000 0 0x300000>;
> +
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + gpio-ranges = <&tlmm 0 0 211>;
> +
> + wakeup-parent = <&pdc>;
> +
> + hub_i2c0_data_clk: hub-i2c0-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio64", "gpio65";
> + function = "i2chub0_se0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c1_data_clk: hub-i2c1-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio66", "gpio67";
> + function = "i2chub0_se1";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c2_data_clk: hub-i2c2-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio68", "gpio69";
> + function = "i2chub0_se2";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c3_data_clk: hub-i2c3-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio70", "gpio71";
> + function = "i2chub0_se3";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c4_data_clk: hub-i2c4-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio72", "gpio73";
> + function = "i2chub0_se4";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c5_data_clk: hub-i2c5-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio74", "gpio75";
> + function = "i2chub0_se5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c6_data_clk: hub-i2c6-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio76", "gpio77";
> + function = "i2chub0_se6";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c7_data_clk: hub-i2c7-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio78", "gpio79";
> + function = "i2chub0_se7";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c8_data_clk: hub-i2c8-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio206", "gpio207";
> + function = "i2chub0_se8";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + hub_i2c9_data_clk: hub-i2c9-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio80", "gpio81";
> + function = "i2chub0_se9";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + pcie0_default_state: pcie0-default-state {
> + perst-pins {
> + pins = "gpio94";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + clkreq-pins {
> + pins = "gpio95";
> + function = "pcie0_clk_req_n";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + wake-pins {
> + pins = "gpio96";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + pcie1_default_state: pcie1-default-state {
> + perst-pins {
> + pins = "gpio97";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> +
> + clkreq-pins {
> + pins = "gpio98";
> + function = "pcie1_clk_req_n";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + wake-pins {
> + pins = "gpio99";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + qup_i2c0_data_clk: qup-i2c0-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio32", "gpio33";
> + function = "qup1_se0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c1_data_clk: qup-i2c1-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio36", "gpio37";
> + function = "qup1_se1";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c2_data_clk: qup-i2c2-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio40", "gpio41";
> + function = "qup1_se2";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c3_data_clk: qup-i2c3-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio44", "gpio45";
> + function = "qup1_se3";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c4_data_clk: qup-i2c4-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio48", "gpio49";
> + function = "qup1_se4";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c5_data_clk: qup-i2c5-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio52", "gpio53";
> + function = "qup1_se5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c6_data_clk: qup-i2c6-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio56", "gpio57";
> + function = "qup1_se6";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c7_data_clk: qup-i2c7-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio60", "gpio61";
> + function = "qup1_se7";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c8_data_clk: qup-i2c8-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio0", "gpio1";
> + function = "qup2_se0";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c9_data_clk: qup-i2c9-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio4", "gpio5";
> + function = "qup2_se1";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c10_data_clk: qup-i2c10-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio8", "gpio9";
> + function = "qup2_se2";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c11_data_clk: qup-i2c11-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio12", "gpio13";
> + function = "qup2_se3";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c12_data_clk: qup-i2c12-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio16", "gpio17";
> + function = "qup2_se4";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c13_data_clk: qup-i2c13-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio20", "gpio21";
> + function = "qup2_se5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_i2c14_data_clk: qup-i2c14-data-clk-state {
> + /* SDA, SCL */
> + pins = "gpio24", "gpio25";
> + function = "qup2_se6";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + qup_spi0_cs: qup-spi0-cs-state {
> + pins = "gpio35";
> + function = "qup1_se0";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi0_data_clk: qup-spi0-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio32", "gpio33", "gpio34";
> + function = "qup1_se0";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi1_cs: qup-spi1-cs-state {
> + pins = "gpio39";
> + function = "qup1_se1";
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + qup_spi1_data_clk: qup-spi1-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio36", "gpio37", "gpio38";
> + function = "qup1_se1";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - tsens0: thermal-sensor@c228000 {
> - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> - reg = <0 0x0c228000 0 0x1000>, /* TM */
> - <0 0x0c222000 0 0x1000>; /* SROT */
> + qup_spi2_cs: qup-spi2-cs-state {
> + pins = "gpio43";
> + function = "qup1_se2";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow",
> - "critical";
> + qup_spi2_data_clk: qup-spi2-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio40", "gpio41", "gpio42";
> + function = "qup1_se2";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #qcom,sensors = <15>;
> + qup_spi3_cs: qup-spi3-cs-state {
> + pins = "gpio47";
> + function = "qup1_se3";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #thermal-sensor-cells = <1>;
> - };
> + qup_spi3_data_clk: qup-spi3-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio44", "gpio45", "gpio46";
> + function = "qup1_se3";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - tsens1: thermal-sensor@c229000 {
> - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> - reg = <0 0x0c229000 0 0x1000>, /* TM */
> - <0 0x0c223000 0 0x1000>; /* SROT */
> + qup_spi4_cs: qup-spi4-cs-state {
> + pins = "gpio51";
> + function = "qup1_se4";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow",
> - "critical";
> + qup_spi4_data_clk: qup-spi4-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio48", "gpio49", "gpio50";
> + function = "qup1_se4";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #qcom,sensors = <16>;
> + qup_spi5_cs: qup-spi5-cs-state {
> + pins = "gpio55";
> + function = "qup1_se5";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #thermal-sensor-cells = <1>;
> - };
> + qup_spi5_data_clk: qup-spi5-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio52", "gpio53", "gpio54";
> + function = "qup1_se5";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - tsens2: thermal-sensor@c22a000 {
> - compatible = "qcom,sm8650-tsens", "qcom,tsens-v2";
> - reg = <0 0x0c22a000 0 0x1000>, /* TM */
> - <0 0x0c224000 0 0x1000>; /* SROT */
> + qup_spi6_cs: qup-spi6-cs-state {
> + pins = "gpio59";
> + function = "qup1_se6";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow",
> - "critical";
> + qup_spi6_data_clk: qup-spi6-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio56", "gpio57", "gpio58";
> + function = "qup1_se6";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #qcom,sensors = <13>;
> + qup_spi7_cs: qup-spi7-cs-state {
> + pins = "gpio63";
> + function = "qup1_se7";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #thermal-sensor-cells = <1>;
> - };
> + qup_spi7_data_clk: qup-spi7-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio60", "gpio61", "gpio62";
> + function = "qup1_se7";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - aoss_qmp: power-management@c300000 {
> - compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp";
> - reg = <0 0x0c300000 0 0x400>;
> + qup_spi8_cs: qup-spi8-cs-state {
> + pins = "gpio3";
> + function = "qup2_se0";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupt-parent = <&ipcc>;
> - interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> - IRQ_TYPE_EDGE_RISING>;
> + qup_spi8_data_clk: qup-spi8-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio0", "gpio1", "gpio2";
> + function = "qup2_se0";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
> + qup_spi9_cs: qup-spi9-cs-state {
> + pins = "gpio7";
> + function = "qup2_se1";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #clock-cells = <0>;
> - };
> + qup_spi9_data_clk: qup-spi9-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio4", "gpio5", "gpio6";
> + function = "qup2_se1";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - sram@c3f0000 {
> - compatible = "qcom,rpmh-stats";
> - reg = <0 0x0c3f0000 0 0x400>;
> - };
> + qup_spi10_cs: qup-spi10-cs-state {
> + pins = "gpio11";
> + function = "qup2_se2";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - spmi_bus: spmi@c400000 {
> - compatible = "qcom,spmi-pmic-arb";
> - reg = <0 0x0c400000 0 0x3000>,
> - <0 0x0c500000 0 0x4000000>,
> - <0 0x0c440000 0 0x80000>,
> - <0 0x0c4c0000 0 0x20000>,
> - <0 0x0c42d000 0 0x4000>;
> - reg-names = "core",
> - "chnls",
> - "obsrvr",
> - "intr",
> - "cnfg";
> + qup_spi10_data_clk: qup-spi10-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio8", "gpio9", "gpio10";
> + function = "qup2_se2";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "periph_irq";
> + qup_spi11_cs: qup-spi11-cs-state {
> + pins = "gpio15";
> + function = "qup2_se3";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - qcom,ee = <0>;
> - qcom,channel = <0>;
> - qcom,bus-id = <0>;
> + qup_spi11_data_clk: qup-spi11-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio12", "gpio13", "gpio14";
> + function = "qup2_se3";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupt-controller;
> - #interrupt-cells = <4>;
> + qup_spi12_cs: qup-spi12-cs-state {
> + pins = "gpio19";
> + function = "qup2_se4";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - #address-cells = <2>;
> - #size-cells = <0>;
> - };
> + qup_spi12_data_clk: qup-spi12-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio16", "gpio17", "gpio18";
> + function = "qup2_se4";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - tlmm: pinctrl@f100000 {
> - compatible = "qcom,sm8650-tlmm";
> - reg = <0 0x0f100000 0 0x300000>;
> + qup_spi13_cs: qup-spi13-cs-state {
> + pins = "gpio23";
> + function = "qup2_se5";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + qup_spi13_data_clk: qup-spi13-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio20", "gpio21", "gpio22";
> + function = "qup2_se5";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - gpio-controller;
> - #gpio-cells = <2>;
> + qup_spi14_cs: qup-spi14-cs-state {
> + pins = "gpio27";
> + function = "qup2_se6";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - interrupt-controller;
> - #interrupt-cells = <2>;
> + qup_spi14_data_clk: qup-spi14-data-clk-state {
> + /* MISO, MOSI, CLK */
> + pins = "gpio24", "gpio25", "gpio26";
> + function = "qup2_se6";
> + drive-strength = <6>;
> + bias-disable;
> + };
>
> - gpio-ranges = <&tlmm 0 0 211>;
> + qup_uart14_default: qup-uart14-default-state {
> + /* TX, RX */
> + pins = "gpio26", "gpio27";
> + function = "qup2_se6";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
>
> - wakeup-parent = <&pdc>;
> + qup_uart14_cts_rts: qup-uart14-cts-rts-state {
> + /* CTS, RTS */
> + pins = "gpio24", "gpio25";
> + function = "qup2_se6";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
>
> qup_uart15_default: qup-uart15-default-state {
> /* TX, RX */
> @@ -1086,6 +3759,46 @@ qup_uart15_default: qup-uart15-default-state {
> drive-strength = <2>;
> bias-disable;
> };
> +
> + sdc2_sleep: sdc2-sleep-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> +
> + sdc2_default: sdc2-default-state {
> + clk-pins {
> + pins = "sdc2_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc2_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc2_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> + };
> };
>
> apps_smmu: iommu@15000000 {
> @@ -1437,6 +4150,107 @@ cpufreq_hw: cpufreq@17d91000 {
> #clock-cells = <1>;
> };
>
> + pmu@24091000 {
> + compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
> + reg = <0 0x24091000 0 0x1000>;
> +
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
> +
> + operating-points-v2 = <&llcc_bwmon_opp_table>;
> +
> + llcc_bwmon_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-0 {
> + opp-peak-kBps = <2086000>;
> + };
> +
> + opp-1 {
> + opp-peak-kBps = <2929000>;
> + };
> +
> + opp-2 {
> + opp-peak-kBps = <5931000>;
> + };
> +
> + opp-3 {
> + opp-peak-kBps = <6515000>;
> + };
> +
> + opp-4 {
> + opp-peak-kBps = <7980000>;
> + };
> +
> + opp-5 {
> + opp-peak-kBps = <10437000>;
> + };
> +
> + opp-6 {
> + opp-peak-kBps = <12157000>;
> + };
> +
> + opp-7 {
> + opp-peak-kBps = <14060000>;
> + };
> +
> + opp-8 {
> + opp-peak-kBps = <16113000>;
> + };
> + };
> + };
> +
> + pmu@240b7400 {
> + compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon";
> + reg = <0 0x240b7400 0 0x600>;
> +
> + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
> +
> + operating-points-v2 = <&cpu_bwmon_opp_table>;
> +
> + cpu_bwmon_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-0 {
> + opp-peak-kBps = <4577000>;
> + };
> +
> + opp-1 {
> + opp-peak-kBps = <7110000>;
> + };
> +
> + opp-2 {
> + opp-peak-kBps = <9155000>;
> + };
> +
> + opp-3 {
> + opp-peak-kBps = <12298000>;
> + };
> +
> + opp-4 {
> + opp-peak-kBps = <14236000>;
> + };
> +
> + opp-5 {
> + opp-peak-kBps = <16265000>;
> + };
> + };
> + };
> +
> + gem_noc: interconnect@24100000 {
> + compatible = "qcom,sm8650-gem-noc";
> + reg = <0 0x24100000 0 0xc5080>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> system-cache-controller@25000000 {
> compatible = "qcom,sm8650-llcc";
> reg = <0 0x25000000 0 0x200000>,
> @@ -1452,6 +4266,137 @@ system-cache-controller@25000000 {
>
> interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + remoteproc_adsp: remoteproc@30000000 {
> + compatible = "qcom,sm8650-adsp-pas";
> + reg = <0 0x30000000 0 0x100>;
> +
> + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +
> + power-domains = <&rpmhpd RPMHPD_LCX>,
> + <&rpmhpd RPMHPD_LMX>;
> + power-domain-names = "lcx",
> + "lmx";
> +
> + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_adsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + remoteproc_adsp_glink: glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_LPASS
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + qcom,remote-pid = <2>;
> +
> + label = "lpass";
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> +
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> +
> + label = "adsp";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> +
> + nsp_noc: interconnect@320c0000 {
> + compatible = "qcom,sm8650-nsp-noc";
> + reg = <0 0x320c0000 0 0xf080>;
> +
> + qcom,bcm-voters = <&apps_bcm_voter>;
> +
> + #interconnect-cells = <2>;
> + };
> +
> + remoteproc_cdsp: remoteproc@32300000 {
> + compatible = "qcom,sm8650-cdsp-pas";
> + reg = <0 0x32300000 0 0x1400000>;
> +
> + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
> + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
> + interrupt-names = "wdog",
> + "fatal",
> + "ready",
> + "handover",
> + "stop-ack";
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
> + clock-names = "xo";
> +
> + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +
> + power-domains = <&rpmhpd RPMHPD_CX>,
> + <&rpmhpd RPMHPD_MXC>,
> + <&rpmhpd RPMHPD_NSP>;
> + power-domain-names = "cx",
> + "mxc",
> + "nsp";
> +
> + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>;
> +
> + qcom,qmp = <&aoss_qmp>;
> +
> + qcom,smem-states = <&smp2p_cdsp_out 0>;
> + qcom,smem-state-names = "stop";
> +
> + status = "disabled";
> +
> + glink-edge {
> + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> +
> + mboxes = <&ipcc IPCC_CLIENT_CDSP
> + IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + qcom,remote-pid = <5>;
> +
> + label = "cdsp";
> +
> + fastrpc {
> + compatible = "qcom,fastrpc";
> +
> + qcom,glink-channels = "fastrpcglink-apps-dsp";
> +
> + label = "cdsp";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> + };
> };
>
> thermal-zones {
>
> --
> 2.34.1
>
>

--
With best wishes
Dmitry

Next message: Greg KH: "Re: [PATCH] USB: serial: option: add Luat Air72*U series products"
Previous message: Alistair Popple: "Re: [PATCH v2 12/14] arm64/mm: Wire up PTE_CONT for user mappings"
In reply to: Neil Armstrong: "[PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes"
Next in thread: Neil Armstrong: "Re: [PATCH v3 6/8] arm64: dts: qcom: sm8650: add interconnect dependent device nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]