[PATCH 06/12] iio: adc: ad9467: add mutex to struct ad9467_state

[Nuno Sa via B4 Relay]

From: Nuno Sa <nuno.sa@xxxxxxxxxx>

When calling ad9467_set_scale(), multiple calls to ad9467_spi_write()
are done which means we need to properly protect the whole operation so
we are sure we will be in a sane state if two concurrent calls occur.

Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
---
 drivers/iio/adc/ad9467.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
index 04474dbfa631..91821dee03b7 100644
--- a/drivers/iio/adc/ad9467.c
+++ b/drivers/iio/adc/ad9467.c
@@ -4,7 +4,7 @@
  *
  * Copyright 2012-2020 Analog Devices Inc.
  */
-
+#include <linux/cleanup.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
@@ -122,6 +122,8 @@ struct ad9467_state {
 	unsigned int			output_mode;
 
 	struct gpio_desc		*pwrdown_gpio;
+	/* protect against concurrent accesses to the device */
+	struct mutex			lock;
 };
 
 static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
@@ -162,6 +164,7 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg,
 	int ret;
 
 	if (!readval) {
+		guard(mutex)(&st->lock);
 		ret = ad9467_spi_write(spi, reg, writeval);
 		if (ret)
 			return ret;
@@ -310,6 +313,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2)
 		if (scale_val[0] != val || scale_val[1] != val2)
 			continue;
 
+		guard(mutex)(&st->lock);
 		ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF,
 				       info->scale_table[i][1]);
 		if (ret < 0)

-- 
2.42.1