Re: [PATCH v7] HID: mcp2200: added driver for GPIOs of MCP2200

[Jiri Kosina]

On Thu, 21 Sep 2023, Johannes Roith wrote:

> Added a gpiochip compatible driver to control the 8 GPIOs of
> the MCP2200 by using the HID interface.
> 
> Using GPIOs with alternative functions (GP0<->SSPND, GP1<->USBCFG,
> GP6<->RXLED, GP7<->TXLED) will reset the functions, if set (unset by
> default).
> 
> The driver was tested while also using the UART of the chip. Setting
> and reading the GPIOs has no effect on the UART communication. However,
> a reset is triggered after the CONFIGURE command. If the GPIO Direction
> is constantly changed, this will affect the communication at low baud
> rates. This is a hardware problem of the MCP2200 and is not caused by
> the driver.
> 
> Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>

Now applied to hid.git#for-6.8/mcp2200. Thanks and sorry for the delay 
in the review.

-- 
Jiri Kosina
SUSE Labs