[PATCH 1/2] dt-bindings: connector: usb: add accessory mode description

[Dmitry Baryshkov]

Add description of the USB-C Accessory Modes supported on the particular
USB-C connector. This is required for devices like Qualcomm SM8150-HDK,
which have no other way to express accessory modes supported by the
hardware platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 .../devicetree/bindings/connector/usb-connector.yaml | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
index c1aaac861d9d..b4f96ef85fb0 100644
--- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
+++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
@@ -171,6 +171,18 @@ properties:
       offer the power, Capability Mismatch is set. Required for power sink and
       power dual role.
 
+  accessory-mode-audio:
+    type: boolean
+    description: Whether the device supports Audio Adapter Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
+  accessory-mode-debug:
+    type: boolean
+    description: Whether the device supports Debug Accessory Mode. This
+      is only necessary if there are no other means to discover supported
+      alternative modes (e.g. through the UCSI firmware interface).
+
   altmodes:
     type: object
     description: List of Alternative Modes supported by the schematics on the
-- 
2.42.0