Re: [PATCH v5 2/3] arm64: dts: qcom: Add base qcm6490 idp board dts

From: Dmitry Baryshkov
Date: Mon Nov 20 2023 - 09:55:23 EST

On Mon, 20 Nov 2023 at 15:48, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote:
>
> Add DTS for Qualcomm IDP platform using QCM6490 SoC.
> This adds debug uart, eMMC and usb support along with
> regulators found on this board.
>
> Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 422 +++++++++++++++++++++++
> 2 files changed, 423 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d6cb840b7050..77babebe4904 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> new file mode 100644
> index 000000000000..5b771827d634
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -0,0 +1,422 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sc7280.dtsi"
> +#include "pm7325.dtsi"
> +#include "pm8350c.dtsi"
> +#include "pmk8350.dtsi"
> +
> +/delete-node/ &ipa_fw_mem;
> +/delete-node/ &rmtfs_mem;
> +/delete-node/ &video_mem;
> +/delete-node/ &wlan_ce_mem;
> +/delete-node/ &xbl_mem;
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QCM6490 IDP";
> + compatible = "qcom,qcm6490-idp", "qcom,qcm6490";
> +
> + aliases {
> + serial0 = &uart5;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };

Is there a regulator-vph-pwr somewhere?

> +
> + reserved-memory {
> + xbl_mem: xbl@80700000 {
> + reg = <0x0 0x80700000 0x0 0x100000>;
> + no-map;
> + };
> +
> + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 {
> + reg = <0x0 0x81800000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + camera_mem: camera@84300000 {
> + reg = <0x0 0x84300000 0x0 0x500000>;
> + no-map;
> + };
> +
> + wpss_mem: wpss@84800000 {
> + reg = <0x0 0x84800000 0x0 0x1900000>;
> + no-map;
> + };
> +
> + adsp_mem: adsp@86100000 {
> + reg = <0x0 0x86100000 0x0 0x2800000>;
> + no-map;
> + };
> +
> + cdsp_mem: cdsp@88900000 {
> + reg = <0x0 0x88900000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + video_mem: video@8a700000 {
> + reg = <0x0 0x8a700000 0x0 0x700000>;
> + no-map;
> + };
> +
> + cvp_mem: cvp@8ae00000 {
> + reg = <0x0 0x8ae00000 0x0 0x500000>;
> + no-map;
> + };
> +
> + ipa_fw_mem: ipa-fw@8b300000 {
> + reg = <0x0 0x8b300000 0x0 0x10000>;
> + no-map;
> + };
> +
> + ipa_gsi_mem: ipa-gsi@8b310000 {
> + reg = <0x0 0x8b310000 0x0 0xa000>;
> + no-map;
> + };
> +
> + gpu_microcode_mem: gpu-microcode@8b31a000 {
> + reg = <0x0 0x8b31a000 0x0 0x2000>;
> + no-map;
> + };
> +
> + mpss_mem: mpss@8b800000 {
> + reg = <0x0 0x8b800000 0x0 0xf600000>;
> + no-map;
> + };
> +
> + tz_stat_mem: tz-stat@c0000000 {
> + reg = <0x0 0xc0000000 0x0 0x100000>;
> + no-map;
> + };
> +
> + tags_mem: tags@c0100000 {
> + reg = <0x0 0xc0100000 0x0 0x1200000>;
> + no-map;
> + };
> +
> + qtee_mem: qtee@c1300000 {
> + reg = <0x0 0xc1300000 0x0 0x500000>;
> + no-map;
> + };
> +
> + trusted_apps_mem: trusted_apps@c1800000 {
> + reg = <0x0 0xc1800000 0x0 0x1c00000>;
> + no-map;
> + };
> +
> + debug_vm_mem: debug-vm@d0600000 {
> + reg = <0x0 0xd0600000 0x0 0x100000>;
> + no-map;
> + };

I thought it was proposed to keep the memory map in qcm6490.dtsi. Was
I mistaken or was this proposal declined?

> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm7325-rpmh-regulators";
> + qcom,pmic-id = "b";

No supplies for any of the regulators?

> +
> + vreg_s1b_1p872: smps1 {
> + regulator-min-microvolt = <1840000>;
> + regulator-max-microvolt = <2040000>;
> + };
> +
> + vreg_s2b_0p876: smps2 {
> + regulator-min-microvolt = <570070>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + vreg_s7b_0p972: smps7 {
> + regulator-min-microvolt = <535000>;
> + regulator-max-microvolt = <1120000>;
> + };
> +
> + vreg_s8b_1p272: smps8 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
> + };
> +
> + vreg_l1b_0p912: ldo1 {
> + regulator-min-microvolt = <825000>;
> + regulator-max-microvolt = <925000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p072: ldo2 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3b_0p504: ldo3 {
> + regulator-min-microvolt = <312000>;
> + regulator-max-microvolt = <910000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4b_0p752: ldo4 {
> + regulator-min-microvolt = <752000>;
> + regulator-max-microvolt = <820000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + reg_l5b_0p752: ldo5 {
> + regulator-min-microvolt = <552000>;
> + regulator-max-microvolt = <832000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p2: ldo6 {
> + regulator-min-microvolt = <1140000>;
> + regulator-max-microvolt = <1260000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_2p952: ldo7 {
> + regulator-min-microvolt = <2400000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_0p904: ldo8 {
> + regulator-min-microvolt = <870000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_1p2: ldo9 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b_1p504: ldo11 {
> + regulator-min-microvolt = <1504000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_0p751: ldo12 {
> + regulator-min-microvolt = <751000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_0p53: ldo13 {
> + regulator-min-microvolt = <530000>;
> + regulator-max-microvolt = <824000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_1p08: ldo14 {
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1304000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_0p765: ldo15 {
> + regulator-min-microvolt = <765000>;
> + regulator-max-microvolt = <1020000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_1p1: ldo16 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_1p7: ldo17 {
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l18b_1p8: ldo18 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l19b_1p8: ldo19 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
> + RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8350c-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_s1c_2p19: smps1 {
> + regulator-min-microvolt = <2190000>;
> + regulator-max-microvolt = <2210000>;
> + };
> +
> + vreg_s2c_0p752: smps2 {
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + vreg_s5c_0p752: smps5 {
> + regulator-min-microvolt = <465000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + vreg_s7c_0p752: smps7 {
> + regulator-min-microvolt = <465000>;
> + regulator-max-microvolt = <800000>;
> + };
> +
> + vreg_s9c_1p084: smps9 {
> + regulator-min-microvolt = <1010000>;
> + regulator-max-microvolt = <1170000>;
> + };
> +
> + vreg_l1c_1p8: ldo1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2c_1p62: ldo2 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <1980000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3c_2p8: ldo3 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3540000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l4c_1p62: ldo4 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5c_1p62: ldo5 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6c_2p96: ldo6 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7c_3p0: ldo7 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8c_1p62: ldo8 {
> + regulator-min-microvolt = <1620000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9c_2p96: ldo9 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <35440000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l10c_0p88: ldo10 {
> + regulator-min-microvolt = <720000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11c_2p8: ldo11 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12c_1p65: ldo12 {
> + regulator-min-microvolt = <1650000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13c_2p7: ldo13 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3544000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob_3p296: bob {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3960000>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + non-removable;
> + no-sd;
> + no-sdio;
> +
> + vmmc-supply = <&vreg_l7b_2p952>;
> + vqmmc-supply = <&vreg_l19b_1p8>;
> +
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <32 2>, /* ADSP */
> + <48 4>; /* NFC */
> +};
> +
> +&uart5 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";

Just out of curiosity, what controls the OTG here? Is it the
PMIC-GLINK / UCSI or is it the raw TCPM using the PMIC?

> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l10c_0p88>;
> + vdda33-supply = <&vreg_l2b_3p072>;
> + vdda18-supply = <&vreg_l1c_1p8>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l6b_1p2>;
> + vdda-pll-supply = <&vreg_l1b_0p912>;
> +
> + status = "okay";
> +};
> +
> +&wifi {
> + memory-region = <&wlan_fw_mem>;

Does that work without the CE region? SC7280 lists one.

> +};
> --
> 2.42.0
>
>


--
With best wishes
Dmitry