Re: [PATCH v3 6/6] tty: serial: amba-pl011: factor QDF2400 SoC erratum 44 out of probe

From: Ilpo Järvinen
Date: Mon Nov 20 2023 - 05:02:03 EST


On Mon, 20 Nov 2023, Théo Lebrun wrote:

> On this platform, different vendor data is used. That requires a
> compile-time check as we access (1) a global boolean & (2) our local
> vendor data. Both symbols are accessible only when
> CONFIG_ACPI_SPCR_TABLE is enabled.
>
> Factor the vendor data overriding to a separate function that is empty
> when CONFIG_ACPI_SPCR_TABLE is not defined.
>
> Suggested-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> ---
> drivers/tty/serial/amba-pl011.c | 25 ++++++++++++++++++-------
> 1 file changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
> index 4185d6fd243b..e08a32eb0ed1 100644
> --- a/drivers/tty/serial/amba-pl011.c
> +++ b/drivers/tty/serial/amba-pl011.c
> @@ -2874,6 +2874,22 @@ static int pl011_resume(struct device *dev)
>
> static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume);
>
> +#ifdef CONFIG_ACPI_SPCR_TABLE
> +static void qpdf2400_erratum44_workaround(struct device *dev,
> + struct uart_amba_port *uap)
> +{
> + if (qdf2400_e44_present)

This should be !qdf2400_e44_present.

--
i.


> + return;
> +
> + dev_info(dev, "working around QDF2400 SoC erratum 44\n");
> + uap->vendor = &vendor_qdt_qdf2400_e44;
> +}
> +#else
> +static void qpdf2400_erratum44_workaround(struct device *dev,
> + struct uart_amba_port *uap)
> +{ /* empty */ }
> +#endif
> +
> static int sbsa_uart_probe(struct platform_device *pdev)
> {
> struct uart_amba_port *uap;
> @@ -2909,13 +2925,8 @@ static int sbsa_uart_probe(struct platform_device *pdev)
> return ret;
> uap->port.irq = ret;
>
> -#ifdef CONFIG_ACPI_SPCR_TABLE
> - if (qdf2400_e44_present) {
> - dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n");
> - uap->vendor = &vendor_qdt_qdf2400_e44;
> - } else
> -#endif
> - uap->vendor = &vendor_sbsa;
> + uap->vendor = &vendor_sbsa;
> + qpdf2400_erratum44_workaround(&pdev->dev, uap);
>
> uap->reg_offset = uap->vendor->reg_offset;
> uap->fifosize = 32;
>
>