[PATCH 11/14] arm64: renesas: rzg3s-smarc-som: Invert the logic for SW_SD2_EN macro

[Claudiu]

From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

The intention of SW_SD2_EN macro was to reflect the state of SW_CONFIG3
switch available on RZ/G3S Smarc Module. According to documentation SD2
is enabled when switch is in OFF state. For this, changed the logic of
marco to map value 0 to switch's OFF state and value 1 to switch's ON
state. Along with this update the description for each state for better
understanding.

The value of SW_SD2_EN macro was not changed in file because, according to
documentation, the default state for this switch is ON.

Fixes: adb4f0c5699c ("arm64: dts: renesas: Add initial support for RZ/G3S SMARC SoM")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
index 01a4a9da7afc..275b14acd2ee 100644
--- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi
@@ -14,8 +14,8 @@
  *	0 - SD0 is connected to eMMC
  *	1 - SD0 is connected to uSD0 card
  * @SW_SD2_EN:
- *	0 - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
- *	1 - SD2 is connected to SoC
+ *	0 - (switch OFF) SD2 is connected to SoC
+ *	1 - (switch ON)  SCIF1, SSI0, IRQ0, IRQ1 connected to SoC
  */
 #define SW_SD0_DEV_SEL	1
 #define SW_SD2_EN	1
@@ -25,7 +25,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhi0;
-#if SW_SD2_EN
+#if !SW_SD2_EN
 		mmc2 = &sdhi2;
 #endif
 	};
@@ -116,7 +116,7 @@ &sdhi0 {
 };
 #endif
 
-#if SW_SD2_EN
+#if !SW_SD2_EN
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
 	pinctrl-names = "default";
-- 
2.39.2