Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Andrew Lunn]

> The clock arguments are provided in the later part as below. i will also
> provide more detail clock names for the new added clocks for the ipq5332
> platform in description.
> 
>   - if:
> 
>       properties:
> 
>         compatible:
> 
>           contains:
> 
>             enum:
> 
>               - qcom,ipq5332-mdio
> 
>     then:
> 
>       properties:
> 
>         clocks:
> 
>           items:
> 
>             - description: MDIO clock source frequency fixed to 100MHZ
> 
>             - description: UNIPHY0 AHB clock source frequency fixed to
> 100MHZ
>             - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
>             - description: UNIPHY1 AHB clock source frequency fixed to
> 100MHZ
>             - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ

As i said before, the frequency of the clocks does not matter
here. That appears to be the drivers problem. I assume every board
design, with any sort of PHY, needs the same clock configuration?

      Andrew