[PATCH 00/16] arm64: qcom: add sm8550-aim300 board support

[Tengfei Fan]

Add sm8550-aim300 board support, and enable serial, UFS, USB, PCIe,
audio, LEDs, PMIC Volume, Power buttons, sound card and bluetooth
functions support on this board.

Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
---

Tengfei Fan (16):
  dt-bindings: arm: qcom: add SM8550 AIM300
  dt-bindings: interrupt-controller: qcom,pdc: document qcom,sm8550-pdc
  arm64: dts: qcom: sm8550: update Soundwire node name
  arm64: dts: qcom: sm8550: remove address/size-cells from pwm
  arm64: dts: qcom: sm8550: remove address/size-cells from mdss_dsi1
  arm64: dts: qcom: sm8550-aim300: add SM8550 AIM300
  arm64: dts: qcom: sm8550-aim300: add PCIe0
  arm64: dts: qcom: sm8550-aim300: add WCD9385 audio-codec
  arm64: dts: qcom: sm8550-aim300: add flash LEDs
  arm64: dts: qcom: sm8550-aim300: add display and panel
  arm64: dts: qcom: sm8550-aim300: add notification RGB LED
  arm64: dts: qcom: sm8550-aim300: enable PMIC Volume and Power buttons
  arm64: dts: qcom: sm8550-aim300: add WSA8845 speakers
  arm64: dts: qcom: sm8550-aim300: add sound card
  arm64: dts: qcom: sm8550-aim300: add pmic glink port/endpoints
  arm64: dts: qcom: sm8550-aim300: add bluetooth support

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 .../interrupt-controller/qcom,pdc.yaml        |   1 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm8550.dtsi          |   2 -
 arch/arm64/boot/dts/qcom/sm8550-aim300.dts    | 995 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8550.dtsi          |  11 +-
 6 files changed, 1002 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sm8550-aim300.dts


base-commit: eff99d8edbed7918317331ebd1e365d8e955d65e
-- 
2.17.1