[PATCH 3/3] drm/ssd130x: Change "solomon,page-offset" property default value

[Javier Martinez Canillas]

This is used to specify the page start address offset of the display RAM.

The value is used as offset when setting the page start address with the
SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to
1 if the property is not present in the Device Tree.

But the datasheet mentions that the value on reset for the page start is a
0, so it makes more sense to also have 0 as the default value for the page
offset if the property is not present.

In fact, using a default value of 1 leads to the display not working when
the emulated fbdev is attached to the framebuffer console.

Reported-by: Sahaj Sarup <sahaj.sarup@xxxxxxxxxx>
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
---

 drivers/gpu/drm/solomon/ssd130x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index bef293922b98..8944129a8e0b 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -1453,7 +1453,7 @@ static void ssd130x_parse_properties(struct ssd130x_device *ssd130x)
 		ssd130x->height = ssd130x->device_info->default_height;
 
 	if (device_property_read_u32(dev, "solomon,page-offset", &ssd130x->page_offset))
-		ssd130x->page_offset = 1;
+		ssd130x->page_offset = 0;
 
 	if (device_property_read_u32(dev, "solomon,col-offset", &ssd130x->col_offset))
 		ssd130x->col_offset = 0;
-- 
2.41.0