Re: [PATCH v3 2/6] net: phy: introduce core support for phy-mode = "10g-qxgmii"

[Jie Luo]

On 11/15/2023 10:31 PM, Conor Dooley wrote:
> On Wed, Nov 15, 2023 at 10:06:26PM +0800, Luo Jie wrote:
> > From: Vladimir Oltean <vladimir.oltean@xxxxxxx>
> >
> > 10G-QXGMII is a MAC-to-PHY interface defined by the USXGMII multiport
> > specification. It uses the same signaling as USXGMII, but it multiplexes
> > 4 ports over the link, resulting in a maximum speed of 2.5G per port.
> >
> > Some in-tree SoCs like the NXP LS1028A use "usxgmii" when they mean
> > either the single-port USXGMII or the quad-port 10G-QXGMII variant, and
> > they could get away just fine with that thus far. But there is a need to
> > distinguish between the 2 as far as SerDes drivers are concerned.
> >
> > Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
> > Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> > ---
> >   .../devicetree/bindings/net/ethernet-controller.yaml |  1 +
>
> I know it is one line, but bindings need to be in their own patches
> please.

Ok, will split the binding change out as a separate patch.
Thanks Conor for the suggestion.