[PATCH v3 09/14] x86/percpu/64: Use relative percpu offsets
From: Brian Gerst
Date: Wed Nov 15 2023 - 12:37:58 EST
The percpu section is currently linked at virtual address 0, because
older compilers hardcoded the stack protector canary value at a fixed
offset from the start of the GS segment. Now that the canary is a
normal percpu variable, the percpu section can be linked normally.
This means that x86-64 will calculate percpu offsets like most other
architectures, as the delta between the initial percpu address and the
dynamically allocated memory.
Signed-off-by: Brian Gerst <brgerst@xxxxxxxxx>
---
arch/x86/include/asm/processor.h | 6 +++++-
arch/x86/kernel/head_64.S | 19 +++++++++----------
arch/x86/kernel/setup_percpu.c | 12 ++----------
arch/x86/kernel/vmlinux.lds.S | 29 +----------------------------
arch/x86/platform/pvh/head.S | 5 ++---
arch/x86/tools/relocs.c | 10 +++-------
arch/x86/xen/xen-head.S | 9 ++++-----
init/Kconfig | 2 +-
8 files changed, 27 insertions(+), 65 deletions(-)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 3ee091225904..73fa9d4d2e16 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -403,7 +403,11 @@ DECLARE_INIT_PER_CPU(fixed_percpu_data);
static inline unsigned long cpu_kernelmode_gs_base(int cpu)
{
- return (unsigned long)per_cpu(fixed_percpu_data.gs_base, cpu);
+#ifdef CONFIG_SMP
+ return per_cpu_offset(cpu);
+#else
+ return 0;
+#endif
}
extern asmlinkage void entry_SYSCALL32_ignore(void);
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 0d94d2a091fe..fe73e1c4cc5d 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -70,11 +70,14 @@ SYM_CODE_START_NOALIGN(startup_64)
leaq _text(%rip), %rdi
- /* Setup GSBASE to allow stack canary access for C code */
+ /*
+ * Set up GSBASE.
+ * Note that, on SMP, the boot cpu uses init data section until
+ * the per cpu areas are set up.
+ */
movl $MSR_GS_BASE, %ecx
- leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
- movl %edx, %eax
- shrq $32, %rdx
+ xorl %eax, %eax
+ xorl %edx, %edx
wrmsr
call startup_64_setup_env
@@ -343,16 +346,12 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
movl %eax,%fs
movl %eax,%gs
- /* Set up %gs.
- *
- * The base of %gs always points to fixed_percpu_data.
+ /*
+ * Set up GSBASE.
* Note that, on SMP, the boot cpu uses init data section until
* the per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
-#ifndef CONFIG_SMP
- leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
-#endif
movl %edx, %eax
shrq $32, %rdx
wrmsr
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 2c97bf7b56ae..8707dd07b9ce 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -23,18 +23,10 @@
#include <asm/cpumask.h>
#include <asm/cpu.h>
-#ifdef CONFIG_X86_64
-#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
-#else
-#define BOOT_PERCPU_OFFSET 0
-#endif
-
-DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
+DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init = {
- [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
-};
+unsigned long __per_cpu_offset[NR_CPUS] __ro_after_init;
EXPORT_SYMBOL(__per_cpu_offset);
/*
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 1239be7cc8d8..57a83fb2d8a0 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -103,12 +103,6 @@ const_pcpu_hot = pcpu_hot;
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(6); /* RW_ */
-#ifdef CONFIG_X86_64
-#ifdef CONFIG_SMP
- percpu PT_LOAD FLAGS(6); /* RW_ */
-#endif
- init PT_LOAD FLAGS(7); /* RWE */
-#endif
note PT_NOTE FLAGS(0); /* ___ */
}
@@ -224,21 +218,7 @@ SECTIONS
__init_begin = .; /* paired with __init_end */
}
-#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - .init.text - should
- * start another segment - init.
- */
- PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
- ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
- "per-CPU data too large - increase CONFIG_PHYSICAL_START")
-#endif
-
INIT_TEXT_SECTION(PAGE_SIZE)
-#ifdef CONFIG_X86_64
- :init
-#endif
/*
* Section for code used exclusively before alternatives are run. All
@@ -368,9 +348,7 @@ SECTIONS
EXIT_DATA
}
-#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU_SECTION(INTERNODE_CACHE_BYTES)
-#endif
. = ALIGN(PAGE_SIZE);
@@ -508,16 +486,11 @@ SECTIONS
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
-#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
+#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x)
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(fixed_percpu_data);
INIT_PER_CPU(irq_stack_backing_store);
-#ifdef CONFIG_SMP
-. = ASSERT((fixed_percpu_data == 0),
- "fixed_percpu_data is not at start of per-cpu area");
-#endif
-
#ifdef CONFIG_CPU_UNRET_ENTRY
. = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned");
#endif
diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index fab90368481f..2ce07dffc314 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -100,9 +100,8 @@ SYM_CODE_START_LOCAL(pvh_start_xen)
* the per cpu areas are set up.
*/
mov $MSR_GS_BASE,%ecx
- lea INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx
- mov %edx, %eax
- shr $32, %rdx
+ xor %eax, %eax
+ xor %edx, %edx
wrmsr
call xen_prepare_pvh
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 24ad10c62840..ef355242a8d8 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -822,12 +822,7 @@ static void percpu_init(void)
*/
static int is_percpu_sym(ElfW(Sym) *sym, const char *symname)
{
- int shndx = sym_index(sym);
-
- return (shndx == per_cpu_shndx) &&
- strcmp(symname, "__init_begin") &&
- strcmp(symname, "__per_cpu_load") &&
- strncmp(symname, "init_per_cpu_", 13);
+ return 0;
}
@@ -1051,7 +1046,8 @@ static int cmp_relocs(const void *va, const void *vb)
static void sort_relocs(struct relocs *r)
{
- qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
+ if (r->count)
+ qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
}
static int write32(uint32_t v, FILE *f)
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 30f27e757354..7e8754c5fa1d 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -51,15 +51,14 @@ SYM_CODE_START(startup_xen)
leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp
- /* Set up %gs.
- *
- * The base of %gs always points to fixed_percpu_data.
+ /*
+ * Set up GSBASE.
* Note that, on SMP, the boot cpu uses init data section until
* the per cpu areas are set up.
*/
movl $MSR_GS_BASE,%ecx
- movq $INIT_PER_CPU_VAR(fixed_percpu_data),%rax
- cdq
+ xorl %eax, %eax
+ xorl %edx, %edx
wrmsr
mov %rsi, %rdi
diff --git a/init/Kconfig b/init/Kconfig
index 9ffb103fc927..5f2c1f4a16aa 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -1718,7 +1718,7 @@ config KALLSYMS_ALL
config KALLSYMS_ABSOLUTE_PERCPU
bool
depends on KALLSYMS
- default X86_64 && SMP
+ default n
config KALLSYMS_BASE_RELATIVE
bool
--
2.41.0