Re: [PATCH 9/9] dt-bindings: net: ipq4019-mdio: Document ipq5332 platform

[Andrew Lunn]

> +  phy-reset-gpio:
> +    minItems: 1
> +    maxItems: 3
> +    description:
> +      GPIO used to reset the PHY, each GPIO is for resetting the connected
> +      ethernet PHY device.

This is a PHY property, so should be in the PHY node. phylib should
then take care of fit.

> +
> +  phyaddr-fixup:
> +    description: Register address for programing MDIO address of PHY devices

Please give a better description of this and the next two properties.

> +
> +  pcsaddr-fixup:
> +    description: Register address for programing MDIO address of PCS devices
> +
> +  mdio-clk-fixup:
> +    description: The initialization clocks to be configured
> +
> +  fixup:
> +    description: The MDIO address of PHY/PCS device to be programed
> +        clocks:
> +          items:
> +            - description: MDIO clock source frequency fixed to 100MHZ
> +            - description: UNIPHY0 AHB clock source frequency fixed to 100MHZ
> +            - description: UNIPHY0 SYS clock source frequency fixed to 24MHZ
> +            - description: UNIPHY1 AHB clock source frequency fixed to 100MHZ
> +            - description: UNIPHY1 SYS clock source frequency fixed to 24MHZ

The clock frequencies is not relevent here, the driver sets that up.

    Andrew