Re: [RFC PATCH V2 00/38] rv64ilp32: Running ILP32 on RV64 ISA

From: Guo Ren
Date: Sun Nov 12 2023 - 23:22:58 EST

Next message: Gavin Shan: "Re: [PATCH RFC 20/22] LoongArch: convert to use arch_cpu_is_hotpluggable()"
Previous message: Gavin Shan: "Re: [PATCH RFC 18/22] LoongArch: Switch over to GENERIC_CPU_DEVICES"
In reply to: Guo Ren: "Re: [RFC PATCH V2 00/38] rv64ilp32: Running ILP32 on RV64 ISA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sun, Nov 12, 2023 at 01:14:36AM -0500, guoren@xxxxxxxxxx wrote:
> From: Guo Ren <guoren@xxxxxxxxxxxxxxxxx>
>
> This patch series adds s64ilp32 & u64ilp32 support to riscv. The term
> s64ilp32 means smode-xlen=64 and -mabi=ilp32 (ints, longs, and pointers
> are all 32-bit) and u64ilp32 means umode-xlen=64 and -mabi=ilp32, i.e.,
> running 32-bit Linux kernel on 64-bit supervisor mode or running 32-bit
> Linux applications on 32-bit user mode. There have been many 64ilp32
> abis existing, such as mips-n32 [1], arm-aarch64ilp32 [2], and x86-x32
> [3], but they are all about userspace. Thus, this should be the first
> time running a 32-bit Linux kernel with the 64ilp32 ABI at supervisor
> mode (If not, correct me).
>
> +--------------------------------+------------+
> | +-------------------+--------+ | +--------+ |
> | | (compat)|(compat)| | | | |
> | |u64lp64 u64ilp32|u32ilp32| | |u32ilp32| | ABI
> | | ^^^^^^^^| | | | | |
> | +-------------------+--------+ | +--------+ |
> | +-------------------+--------+ | +--------+ |
> | | UXL=64 | UXL=32 | | | UXL=32 | | ISA
> | +-------------------+--------+ | +--------+ |
> +--------------------------------+------------+-------
> | +----------------------------+ | +--------+ |
> | | 64BIT | | | 32BIT| | Kernel
> | | s64lp64 & s64ilp32 | | |s32ilp32| | ABI
> | | ^^^^^^^^ | | | | |
> | +----------------------------+ | +--------+ |
> | +----------------------------+ | +--------+ |
> | | SXL=64 | | | SXL=32 | | ISA
> | +----------------------------+ | +--------+ |
> +--------------------------------+------------+
>
> Motivation:
> ===========
> The current RISC-V has the 64-bit ISA profiles of RVA20, RVA22, and RVA23
> (ongoing) [4], but no 32-bit RVA profile exists or any ongoing plan. That
> means when a vendor wants to produce a 32-bit ISA RISC-V Application
> Processor, they have no shape to follow. Therefore, many cheap riscv
> chips have come out but follow the 64-bit RVA profiles, such as Allwinner
> D1/D1s/F133 [5], SOPHGO CV1800B [6], Canaan Kendryte k230 [7], and
> Bouffalo Lab BL808[3] which are typically cortex-a7 (arm 32-bit) product
> scenarios. So running ILP32 on rv64 ISA is the only choice for these
> chips.
>
> The ilp32 and lp64 have different scenarios, but if the address space
> and data range are under 2GB. The ilp32, compared to the lp64, has three
> advantages:
> - Better memory footprint cost.
> - Better benchmark performance (SPEC CPU 2006/2017).
> - Compatible with ilp32 code.
>
> Memory Footprint
> ================
> rv64lp64 has 25% more memory footprint than rv64ilp32!
>
> Calculation Process:
> rv64lp64 = (4096 - 3407) = 689
> rv64ilp32 = (4096 - 3231) = 865
Correct:
rv64ilp32 = (4096 - 3407) = 689
rv64lp64 = (4096 - 3231) = 865

> (865 - 689)/689 = 25.54426%
>
> Here are the ILP32 v.s. LP64 Linux kernel data type comparison:
> 32-bit 64-bit
> sizeof(page): 32bytes 64bytes
> sizeof(list_head): 8bytes 16bytes
> sizeof(hlist_head): 8bytes 16bytes
> sizeof(vm_area): 68bytes 136bytes
> ...
>
> The size of ilp32's long & pointer is just half of lp64's (rv64 default
> abi - longs and pointers are all 64-bit). This significant difference
> in data type causes different memory & cache footprint costs. Here is
> the comparison log between rv64ilp32 and rv64lp64 in the same 20MB(16MB
> for Linux) qemu system environment:
>
> rv64ilp32:
> Memory: 14008K/16384K available (1253K kernel code, 474K rwdata, 114K
> rodata, 134K init, 192K bss, 2376K reserved, 0K cma-reserved)
> Mem-Info:
> active_anon:0 inactive_anon:0 isolated_anon:0
> active_file:0 inactive_file:0 isolated_file:0
> unevictable:0 dirty:0 writeback:0
> slab_reclaimable:0 slab_unreclaimable:47
> mapped:0 shmem:0 pagetables:0
> sec_pagetables:0 bounce:0
> kernel_misc_reclaimable:0
> free:3407 free_pcp:45 free_cma:0
> ^^^^^^^^^
> Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB
> inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB
> mapped:0kB dirty:0kB writeback:0kB shmem:0kB writeback_tmp:0kB
> kernel_stack:104kB pagetables:0kB sec_pagetabl
> es:0kB all_unreclaimable? no
> Normal free:13628kB boost:0kB min:472kB low:588kB high:704kB
> reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB
> active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB
> present:16384kB managed:14140kB mlocked:0kB bounce:0
> kB free_pcp:180kB local_pcp:180kB free_cma:0kB
> lowmem_reserve[]: 0 0
> Normal: 3*4kB (UM) 2*8kB (M) 2*16kB (M) 2*32kB (M) 3*64kB (M) 2*128kB
> (UM) 3*256kB (M) 4*512kB (UM) 2*1024kB (UM) 2*2048kB (UM) 1*4096kB (M) =
> 13628kB
> 0 total pagecache pages
> 4096 pages RAM
> 0 pages HighMem/MovableOnly
> 561 pages reserved
>
> rv64lp64:
> Memory: 13776K/16384K available (1234K kernel code, 539K rwdata, 129K
> rodata, 161K init, 207K bss, 2608K reserved, 0K cma-reserved)
> Mem-Info:
> active_anon:0 inactive_anon:0 isolated_anon:0
> active_file:0 inactive_file:0 isolated_file:0
> unevictable:0 dirty:0 writeback:0
> slab_reclaimable:0 slab_unreclaimable:69
> mapped:0 shmem:0 pagetables:1
> sec_pagetables:0 bounce:0
> kernel_misc_reclaimable:0
> free:3231 free_pcp:55 free_cma:0
> ^^^^^^^^^
> Node 0 active_anon:0kB inactive_anon:0kB active_file:0kB
> inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB
> mapped:0kB dirty:0kB writeback:0kB shmem:0kB writeback_tmp:0kB
> kernel_stack:208kB pagetables:4kB sec_pagetabl
> es:0kB all_unreclaimable? no
> Normal free:12924kB boost:0kB min:468kB low:584kB high:700kB
> reserved_highatomic:0KB active_anon:0kB inactive_anon:0kB
> active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB
> present:16384kB managed:13936kB mlocked:0kB bounce:0
> kB free_pcp:220kB local_pcp:220kB free_cma:0kB
> lowmem_reserve[]: 0 0
> Normal: 3*4kB (UM) 4*8kB (UM) 3*16kB (M) 3*32kB (UM) 1*64kB (M) 3*128kB
> (UM) 2*256kB (M) 3*512kB (M) 2*1024kB (UM) 2*2048kB (UM) 1*4096kB (M) =
> 12924kB
> 0 total pagecache pages
> 4096 pages RAM
> 0 pages HighMem/MovableOnly
> 612 pages reserved
>
> Why rv64 isa?
> ==============
> Generally speaking, we should build a 32-bit hardware s-mode to run
> 32-bit Linux on a 64/32-bit processor (such as cortex-a35/a53).
> But, it can't reuse performance-related features and instructions of
> the 64-bit hardware, such as 64-bit ALU, AMO, and LD/SD, which would
> cause significant performance gaps on many Linux kernel features:
>
> - memcpy/memset/strcmp (s64ilp32 has half of the instructions count
> and double the bandwidth of load/store instructions than s32ilp32.)
>
> - ebpf JIT is a 64-bit Language virtual machine ISA, which is not
> suitable for mapping to s32ilp32.
>
> - Atomic64 (s64ilp32 has the exact native instructions mapping as
> s64lp64, but s32ilp32 only uses generic_atomic64, a tradeoff &
> limited software solution.)
>
> - Support cmxchg_double for slub (The 2nd 32-bit Linux
> supports the feature, the 1st is i386.)
>
> - ...
>
> Compared with the user space ecosystem, the 32-bit Linux kernel is more
> eager to need 64ilp32 to improve performance because the Linux kernel
> can't utilize float-point/vector features of the ISA.
>
> Simplifies CPU Design
> =====================
> Yes, there are a lot of runing 32-bit Linux on 64-bit hardware examples
> in history, such as arm cortex a35/a53/a55, which implements the 32-bit
> EL1/EL2/EL3 hardware mode to support 32-bit Linux. We could follow Arm's
> style, but riscv could choose another better way. Compared to UXL=32,
> the MXL=SXL=32 has many CSR-related hardware functionalities, which
> causes a lot of effort to mix them into 64-bit hardware. The s64ilp32
> works on MXL=SXL=64 mode, so the CPU vendors needn't implement 32-bit
> machine and supervisor modes.
>
> How does rv64ilp32 work?
> ========================
> The s64ilp32 is the same as the s64lp64 compat mode from a hardware
> view, i.e., MXL=SXL=64 + UXL=32. Because the s64ilp32 uses CONFIG_32BIT
> of Linux, it only supports u32ilp32 abi user space, the current standard
> rv32 software ecosystem, and it can't work with u64lp64 abi (I don't
> want that complex and useless stuff). But it may work with u64ilp32 in the
> future; now, the s64ilp32 depends on the UXL=32 feature of the hardware.
>
> The 64ilp32 gcc still uses sign-extend lw & auipc to generate address
> variables because inserting zero-extend instructions to mask the highest
> 32-bit would cause significant code size and performance problems. Thus,
> we invented an OS approach to solve the problem:
> - When satp=bare and start physical address < 2GB, there is no sign-extend
> address problem.
> - When satp=bare and start physical address > 2GB, we need zjpm liked
> hardware extensions to mask high 32bit.
> (Fortunately, all existed SoCs' (D1/D1s/F133, CV1800B, k230, BL808)
> start physical address < 2GB.)
> - When satp=sv39, we invent double mapping to make the sign-extended
> virtual address the same as the zero-extended virtual address.
>
> +--------+ +---------+ +--------+
> | | +--| 511:PUD1| | |
> | | | +---------+ | |
> | | | | 510:PUD0|--+ | |
> | | | +---------+ | | |
> | | | | | | | |
> | | | | | | | |
> | | | | | | | |
> | | | | INVALID | | | |
> | | | | | | | |
> | .... | | | | | | .... |
> | | | | | | | |
> | | | +---------+ | | |
> | | +--| 3:PUD1 | | | |
> | | | +---------+ | | |
> | | | | 2:PUD0 |--+ | |
> | | | +---------+ | | |
> | | | |1:USR_PUD| | | |
> | | | +---------+ | | |
> | | | |0:USR_PUD| | | |
> +--------+<--+ +---------+ +-->+--------+
> PUD1 ^ PGD PUD0
> 1GB | 4GB 1GB
> |
> +----------+
> | Sv39 PGDP|
> +----------+
> SATP
>
> The size of xlen was always equal to the pointer/long size before
> s64ilp32 emerged. So we need to introduce a new type of data - xlen_t,
> which could deal with CSR-related and callee-save/restore operations.
>
> Some kernel features use 32BIT/64BIT to determine the exact ISA, such as
> ebpf JIT would map to rv32 ISA when CONFIG_32BIT=y. But s64ilp32 needs
> the ebpf JIT map to rv64 ISA when CONFIG_32BIT=y and we need to use
> another config to distinguish the difference.
>
> More detials, please review the path series.
>
> How to run s64ilp32?
> ====================
>
> GNU toolchain
> -------------
> git clone https://github.com/Liaoshihua/riscv-gnu-toolchain.git
> cd riscv-gnu-toolchain
> ./configure --prefix="$PWD/opt-rv64-ilp32/" --with-arch=rv64imac --with-abi=ilp32
> make linux
> export PATH=$PATH:$PWD/opt-rv64-ilp32/bin/
>
> Opensbi
> -------
> git clone https://github.com/riscv-software-src/opensbi.git
> CROSS_COMPILE=riscv64-unknown-linux-gnu- make PLATFORM=generic
>
> Linux kernel
> ------------
> v6.5-rc1 + patches
> cd linux
> make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu- rv64ilp32_defconfig
> make ARCH=riscv CROSS_COMPILE=riscv64-unknown-linux-gnu- all
>
> Qemu
> ----
> git clone https://github.com/plctlab/plct-qemu.git -b plct-s64ilp32-dev
> cd plct-qemu
> mkdir build
> cd build
> ../qemu/configure --target-list="riscv64-softmmu riscv32-softmmu"
> make
>
> Patch organization
> ==================
> PATCH [ 1-11] u64ilp32: User space support
> PATCH [12-36] adds time-related vDSO common flow for vdso32
Correct:
PATCH [12-36] s64ilp32: Add 64ilp32 linux kernel support2
> PATCH [37] Add tiny defconfig for ilp32 v.s. lp64
> PATCH [38] Unify ilp32 & lp64 configs and memory
>
> Open issues
> ===========
>
> Callee saved the register width
> -------------------------------
> For 64-bit ISA (including 64lp64, 64ilp32), callee can't determine the
> correct width used in the register, so they saved the maximum width of
> the ISA register, i.e., xlen size. We also found this rule in x86-x32,
> mips-n32, and aarch64ilp32, which comes from 64lp64. See PATCH [20]
>
> Here are two downsides of this:
> - It would cause a difference with 32ilp32's stack frame, and s64ilp32
> reuses 32ilp32 software stack. Thus, many additional compatible
> problems would happen during the porting of 64ilp32 software.
> - It also increases the budget of the stack usage.
> <setup_vm>:
> auipc a3,0xff3fb
> add a3,a3,1234 # c0000000
> li a5,-1
> lui a4,0xc0000
> addw sp,sp,-96
> srl a5,a5,0x20
> subw a4,a4,a3
> auipc a2,0x111a
> add a2,a2,1212 # c1d1f000
> sd s0,80(sp)----+
> sd s1,72(sp) |
> sd s2,64(sp) |
> sd s7,24(sp) |
> sd s8,16(sp) |
> sd s9,8(sp) |-> All <= 32b widths, but occupy 64b
> sd ra,88(sp) | stack space.
> sd s3,56(sp) | Affect memory footprint & cache
> sd s4,48(sp) | performance.
> sd s5,40(sp) |
> sd s6,32(sp) |
> sd s10,0(sp)----+
> sll a1,a4,0x20
> subw a2,a2,a3
> and a4,a4,a5
>
> So here is a proposal to riscv 64ilp32 ABI:
> - Let the compiler prevent callee saving ">32b variables" in
> callee-registers. (Q: We need to measure, how the influence of
> 64b variables cross function call?)
>
> EF_RISCV_X32
> ------------
> We add an e_flag (EF_RISCV_X32) to distinguish the 32-bit ELF, which
> occupies BIT[6] of the e_flags layout.
>
> ELF Header:
> Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00
> Class: ELF32
> Data: 2's complement, little endian
> Version: 1 (current)
> OS/ABI: UNIX - System V
> ABI Version: 0
> Type: REL (Relocatable file)
> Machine: RISC-V
> Version: 0x1
> Entry point address: 0x0
> Start of program headers: 0 (bytes into file)
> Start of section headers: 24620 (bytes into file)
> Flags: 0x21, RVC, X32, soft-float ABI
> ^^^
> 64-bit Optimization problem
> ---------------------------
> There is an existing problem in 64ilp32 gcc that combines two pointers
> in one register. Liao is solving that problem. Before he finishes the
> job, we could prevent it with a simple noinline attribute, fortunately.
> struct path {
> struct vfsmount *mnt;
> struct dentry *dentry;
> } __randomize_layout;
>
> struct nameidata {
> struct path path;
> ...
> struct path root;
> ...
> } __randomize_layout;
>
> struct nameidata *nd
> ...
> nd->path = nd->root;
> 6c88 ld a0,24(s1)
> ^^ // a0 contains two pointers
> e088 sd a0,0(s1)
> mntget(path->mnt);
> // Need "lw a0,0(s1)" or "a0 << 32; a0 >> 32"
> 2a6150ef jal c01ce946 <mntget> // bug!
>
> Acknowledge
> ===========
> - GNU: LiaoShihua <shihua@xxxxxxxxxxx>
> Jiawe Chen<jiawei@xxxxxxxxxxx>
> - Qemu: Weiwei Li <liweiwei@xxxxxxxxxxx>
> - Benchmark: Junqiang Wang <wangjunqiang@xxxxxxxxxxx>
> XiaoOu Chen <chenxiaoou@xxxxxxxxxxx>
> - Fedora: Wei Fu <wefu@xxxxxxxxxx>
> Songsong Zhang <U2FsdGVkX1@xxxxxxxxx>
>
> References
> ==========
> [1] https://techpubs.jurassic.nl/manuals/0630/developer/Mpro_...
> [2] https://wiki.debian.org/Arm64ilp32Port
> [3] https://lwn.net/Articles/456731/
> [4] https://github.com/riscv/riscv-profiles/releases
> [5] https://www.cnx-software.com/2021/10/25/allwinner-d1s-f13...
> [6] https://milkv.io/duo/
> [7] https://twitter.com/tphuang/status/1631308330256801793
> [8] https://www.cnx-software.com/2022/12/02/pine64-ox64-sbc-b...
>
> Changelog:
> V2:
> - Add u64ilp32 support
> - Rebase v6.5-rc1
> - Enable 64ilp32 vgettimeofday for benchmarking
>
> V1:
> https://lore.kernel.org/linux-riscv/20230518131013.3366406-1-guoren@xxxxxxxxxx/
>
> Guo Ren (38):
> riscv: u64ilp32: Unify vdso32 & compat_vdso into vdso/Makefile
> riscv: u64ilp32: Remove compat_vdso/
> riscv: u64ilp32: Add time-related vDSO common flow for vdso32
> riscv: u64ilp32: Introduce ILP32 vdso for UXL=64
> riscv: u64ilp32: Adjust vDSO kernel flow for 64ilp32 abi
> riscv: u64ilp32: Add signal support for compat
> riscv: u64ilp32: Add ptrace interface support
> riscv: u64ilp32: Adjust vDSO alternative for 64ilp32 abi
> riscv: u64ilp32: Add xlen_t in user_regs_struct
> riscv: u64ilp32: Remove the restriction of UXL=32
> riscv: u64ilp32: Enable user space runtime switch
> riscv: s64ilp32: Unify ULL & UL into UXL in csr
> riscv: s64ilp32: Introduce xlen_t for 64ILP32 kernel
> riscv: s64ilp32: Add sbi support
> riscv: s64ilp32: Add asid support
> riscv: s64ilp32: Introduce PTR_L and PTR_S
> riscv: s64ilp32: Adjust TASK_SIZE for s64ilp32 kernel
> riscv: s64ilp32: Add ebpf jit support
> riscv: s64ilp32: Add ELF32 support
> riscv: s64ilp32: Add ARCH_RV64ILP32 Kconfig option
> riscv: s64ilp32: Add MMU_SV32 mode support
> riscv: s64ilp32: Add MMU_SV39 mode support
> riscv: s64ilp32: Enable native atomic64
> riscv: s64ilp32: Add TImode (128 int) support
> riscv: s64ilp32: Implement cmpxchg_double
> riscv: s64ilp32: Disable KVM
> riscv: s64ilp32: Correct the rv64ilp32 stackframe layout
> riscv: s64ilp32: Temporary workaround solution to gcc problem
> riscv: s64ilp32: Introduce ARCH_HAS_64ILP32_KERNEL for syscall
> riscv: s64ilp32: Add u32ilp32 ptrace support
> riscv: s64ilp32: Add u32ilp32 signal support
> riscv: s64ilp32: Validate harts by architecture name
> riscv: s64ilp32: Add rv64ilp32_defconfig
> riscv: Cleanup rv32_defconfig
> clocksource: riscv: s64ilp32: Use __riscv_xlen instead of CONFIG_32BIT
> irqchip: riscv: s64ilp32: Use __riscv_xlen instead of CONFIG_32BIT
> add tinylab defconfig
> 64ilp32 v.s. 64lp64
>
> arch/Kconfig | 10 +
> arch/riscv/Kconfig | 49 +++-
> arch/riscv/Kconfig.errata | 2 +-
> arch/riscv/Makefile | 28 ++-
> arch/riscv/configs/32-bit.config | 2 -
> arch/riscv/configs/64ilp32.config | 2 +
> arch/riscv/configs/tinylab32ilp32_defconfig | 88 +++++++
> arch/riscv/configs/tinylab64ilp32_defconfig | 89 +++++++
> arch/riscv/configs/tinylab_defconfig | 89 +++++++
> arch/riscv/include/asm/asm.h | 5 +
> arch/riscv/include/asm/atomic.h | 6 +
> arch/riscv/include/asm/cmpxchg.h | 53 ++++
> arch/riscv/include/asm/cpu_ops_sbi.h | 4 +-
> arch/riscv/include/asm/csr.h | 189 +++++++-------
> arch/riscv/include/asm/elf.h | 7 +-
> arch/riscv/include/asm/extable.h | 2 +-
> arch/riscv/include/asm/module.h | 30 +++
> arch/riscv/include/asm/page.h | 26 +-
> arch/riscv/include/asm/pgtable-64.h | 50 ++--
> arch/riscv/include/asm/pgtable.h | 26 +-
> arch/riscv/include/asm/processor.h | 8 +-
> arch/riscv/include/asm/ptrace.h | 96 ++++----
> arch/riscv/include/asm/sbi.h | 24 +-
> arch/riscv/include/asm/signal32.h | 11 +-
> arch/riscv/include/asm/stacktrace.h | 6 +
> arch/riscv/include/asm/syscall.h | 2 +-
> arch/riscv/include/asm/thread_info.h | 1 +
> arch/riscv/include/asm/timex.h | 10 +-
> arch/riscv/include/asm/tlbflush.h | 2 +-
> arch/riscv/include/asm/vdso.h | 34 ++-
> arch/riscv/include/asm/vdso/gettimeofday.h | 95 +++++++
> arch/riscv/include/uapi/asm/elf.h | 2 +-
> arch/riscv/include/uapi/asm/ptrace.h | 72 +++---
> arch/riscv/include/uapi/asm/unistd.h | 1 +
> arch/riscv/kernel/Makefile | 5 +-
> arch/riscv/kernel/alternative.c | 50 +++-
> arch/riscv/kernel/compat_signal.c | 23 +-
> arch/riscv/kernel/compat_vdso/.gitignore | 2 -
> arch/riscv/kernel/compat_vdso/compat_vdso.S | 8 -
> .../kernel/compat_vdso/compat_vdso.lds.S | 3 -
> arch/riscv/kernel/compat_vdso/flush_icache.S | 3 -
> arch/riscv/kernel/compat_vdso/getcpu.S | 3 -
> arch/riscv/kernel/compat_vdso/note.S | 3 -
> arch/riscv/kernel/compat_vdso/rt_sigreturn.S | 3 -
> arch/riscv/kernel/cpu.c | 9 +-
> arch/riscv/kernel/cpu_ops_sbi.c | 4 +-
> arch/riscv/kernel/entry.S | 24 +-
> arch/riscv/kernel/head.S | 8 +-
> arch/riscv/kernel/process.c | 10 +-
> arch/riscv/kernel/ptrace.c | 9 +-
> arch/riscv/kernel/sbi.c | 24 +-
> arch/riscv/kernel/signal.c | 79 ++++--
> arch/riscv/kernel/traps.c | 4 +-
> arch/riscv/kernel/vdso.c | 102 ++++++--
> arch/riscv/kernel/vdso/Makefile | 232 ++++++++++++++----
> ..._vdso_offsets.sh => gen_vdso32_offsets.sh} | 2 +-
> .../gen_vdso64_offsets.sh} | 2 +-
> .../kernel/vdso/gen_vdso64ilp32_offsets.sh | 5 +
> arch/riscv/kernel/vdso/vdso.lds.S | 2 -
> arch/riscv/kernel/vdso/vgettimeofday.c | 39 ++-
> arch/riscv/kernel/vdso32.S | 8 +
> arch/riscv/kernel/{vdso/vdso.S => vdso64.S} | 8 +-
> arch/riscv/kernel/vdso64ilp32.S | 8 +
> arch/riscv/kernel/vector.c | 2 +-
> arch/riscv/kvm/Kconfig | 1 +
> arch/riscv/lib/Makefile | 1 +
> arch/riscv/lib/memset.S | 4 +-
> arch/riscv/mm/context.c | 16 +-
> arch/riscv/mm/fault.c | 13 +-
> arch/riscv/mm/init.c | 24 +-
> arch/riscv/net/Makefile | 6 +-
> arch/riscv/net/bpf_jit_comp64.c | 6 +-
> drivers/clocksource/timer-riscv.c | 2 +-
> drivers/irqchip/irq-riscv-intc.c | 9 +-
> fs/namei.c | 2 +-
> fs/open.c | 22 ++
> fs/read_write.c | 17 ++
> fs/sync.c | 22 ++
> include/linux/syscalls.h | 35 ++-
> init/main.c | 2 +
> kernel/signal.c | 24 +-
> mm/fadvise.c | 24 ++
> 82 files changed, 1526 insertions(+), 509 deletions(-)
> create mode 100644 arch/riscv/configs/64ilp32.config
> create mode 100644 arch/riscv/configs/tinylab32ilp32_defconfig
> create mode 100644 arch/riscv/configs/tinylab64ilp32_defconfig
> create mode 100644 arch/riscv/configs/tinylab_defconfig
> delete mode 100644 arch/riscv/kernel/compat_vdso/.gitignore
> delete mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.S
> delete mode 100644 arch/riscv/kernel/compat_vdso/compat_vdso.lds.S
> delete mode 100644 arch/riscv/kernel/compat_vdso/flush_icache.S
> delete mode 100644 arch/riscv/kernel/compat_vdso/getcpu.S
> delete mode 100644 arch/riscv/kernel/compat_vdso/note.S
> delete mode 100644 arch/riscv/kernel/compat_vdso/rt_sigreturn.S
> rename arch/riscv/kernel/vdso/{gen_vdso_offsets.sh => gen_vdso32_offsets.sh} (78%)
> rename arch/riscv/kernel/{compat_vdso/gen_compat_vdso_offsets.sh => vdso/gen_vdso64_offsets.sh} (77%)
> create mode 100755 arch/riscv/kernel/vdso/gen_vdso64ilp32_offsets.sh
> create mode 100644 arch/riscv/kernel/vdso32.S
> rename arch/riscv/kernel/{vdso/vdso.S => vdso64.S} (73%)
> create mode 100644 arch/riscv/kernel/vdso64ilp32.S
>
> --
> 2.36.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv
>

Next message: Gavin Shan: "Re: [PATCH RFC 20/22] LoongArch: convert to use arch_cpu_is_hotpluggable()"
Previous message: Gavin Shan: "Re: [PATCH RFC 18/22] LoongArch: Switch over to GENERIC_CPU_DEVICES"
In reply to: Guo Ren: "Re: [RFC PATCH V2 00/38] rv64ilp32: Running ILP32 on RV64 ISA"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]