[PATCH] arm64: dts: ls1028a-qds: replace "usxgmii" with "10g-qxgmii" for 13bb

[Vladimir Oltean]

The Felix switch actually supports the quad-port 10g-qxgmii variant of
usxgmii, so use that as the phy-mode in this device tree overlay.

Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
index f826392c23fa..509cf95026df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dtso
@@ -60,28 +60,28 @@
 	port@0 {
 		status = "okay";
 		phy-handle = <&slot2_qxgmii0>;
-		phy-mode = "usxgmii";
+		phy-mode = "10g-qxgmii";
 		managed = "in-band-status";
 	};
 
 	port@1 {
 		status = "okay";
 		phy-handle = <&slot2_qxgmii1>;
-		phy-mode = "usxgmii";
+		phy-mode = "10g-qxgmii";
 		managed = "in-band-status";
 	};
 
 	port@2 {
 		status = "okay";
 		phy-handle = <&slot2_qxgmii2>;
-		phy-mode = "usxgmii";
+		phy-mode = "10g-qxgmii";
 		managed = "in-band-status";
 	};
 
 	port@3 {
 		status = "okay";
 		phy-handle = <&slot2_qxgmii3>;
-		phy-mode = "usxgmii";
+		phy-mode = "10g-qxgmii";
 		managed = "in-band-status";
 	};
 };
-- 
2.34.1