[PATCH 2/6] arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs

[Krzysztof Kozlowski]

Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index fd2fab4895b3..8eec33661ef6 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -531,8 +531,8 @@ mdss_edp_out: endpoint {
 };
 
 &pcie1 {
-	perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
-	wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie2_default_state>;
 
-- 
2.34.1