[PATCH v2] arm64: dts: qcom: Add definition for three LEDs.

[Hui Liu via B4 Relay]

From: Hui Liu <quic_huliu@xxxxxxxxxxx>

Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.

Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
---
Changes in v2:
- Rephrased commit text and updated the nodes to board file.
- Link to v1: https://lore.kernel.org/r/20231108-qcom_leds-v1-1-c3e1c8572cb0@xxxxxxxxxxx
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 2ff549f4dc7a..228e2aaeb861 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
 #include "sc7280.dtsi"
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
@@ -365,6 +366,30 @@ vreg_bob: bob {
 	};
 };
 
+&pm8350c_pwm {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	led@1 {
+		reg = <1>;
+		color = <LED_COLOR_ID_RED>;
+		label = "red";
+	};
+
+	led@2 {
+		reg = <2>;
+		color = <LED_COLOR_ID_GREEN>;
+		label = "green";
+	};
+
+	led@3 {
+		reg = <3>;
+		color = <LED_COLOR_ID_BLUE>;
+		label = "blue";
+	};
+};
+
 &gpi_dma0 {
 	status = "okay";
 };

---
base-commit: b9604be241587fb29c0f40450e53d0a37dc611b5
change-id: 20231108-qcom_leds-c3b0b7029008

Best regards,
-- 
Hui Liu <quic_huliu@xxxxxxxxxxx>