Re: [PATCH v2 2/3] phy: qcom-qmp-pcie: Add endpoint refclk control register offset

From: Krishna Chaitanya Chundru
Date: Thu Nov 09 2023 - 04:37:00 EST



On 11/7/2023 6:36 PM, Dmitry Baryshkov wrote:
On Tue, 7 Nov 2023 at 14:26, Krishna chaitanya chundru
<quic_krichai@xxxxxxxxxxx> wrote:
Some platforms needs to keep endpoint refclk always on, for this
purpose add this offset for all the applicable phy versions.

And also add reg layout for few controllers as we are adding
endpoint refclk control register which changes based upon phy version.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 26 +++++++++++++++++++---
drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h | 1 +
drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h | 1 +
4 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index a63ca7424974..74d03d217ff2 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -77,6 +77,7 @@ enum qphy_reg_layout {
QPHY_START_CTRL,
QPHY_PCS_STATUS,
QPHY_PCS_POWER_DOWN_CONTROL,
+ QPHY_PCS_ENDPOINT_REFCLK_CNTRL,
/* Keep last to ensure regs_layout arrays are properly initialized */
QPHY_LAYOUT_SIZE
};
@@ -93,6 +94,7 @@ static const unsigned int pciephy_v3_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS,
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL,
+ [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V3_PCS_ENDPOINT_REFCLK_CNTRL,
};

static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -107,6 +109,7 @@ static const unsigned int pciephy_v4_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
+ [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V4_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
};

static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -114,6 +117,23 @@ static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
[QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
[QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
+ [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
+};
+
+static const unsigned int pciephy_v5_20_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
Nit: we should probably define V5_20 and v6_20 versions of these registers

We don't have separate defines for v5_20 and v6_20 for these registers, that is why we are using these.

And the offsets are same for those version. That is why I tried to use macros.

- Krishna Chaitanya.

If you were to send v3 for any reason, could you please add them?

+ [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_CNTRL,
+};
+
+static const unsigned int pciephy_v6_20_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL,
+ [QPHY_PCS_ENDPOINT_REFCLK_CNTRL] = QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_CNTRL,
};

static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
@@ -2956,7 +2976,7 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v5_20_regs_layout,

.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
@@ -3012,7 +3032,7 @@ static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = sm8550_qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v6_20_regs_layout,

.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
@@ -3047,7 +3067,7 @@ static const struct qmp_phy_cfg sa8775p_qmp_gen4x2_pciephy_cfg = {
.num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = pciephy_v5_regs_layout,
+ .regs = pciephy_v5_20_regs_layout,

.pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
.phy_status = PHYSTATUS_4_20,
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
index a469ae2a10a1..9b166286afda 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
@@ -11,6 +11,7 @@
#define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG2 0x0c
#define QPHY_V5_PCS_PCIE_POWER_STATE_CONFIG4 0x14
#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20
+#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_CNTRL 0x24
#define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1 0x54
#define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS 0x94
#define QPHY_V5_PCS_PCIE_EQ_CONFIG2 0xa8
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
index cdf8c04ea078..8b114e538a07 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5_20.h
@@ -9,6 +9,7 @@
/* Only for QMP V5_20 PHY - PCIe PCS registers */
#define QPHY_V5_20_PCS_PCIE_POWER_STATE_CONFIG2 0x00c
#define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x01c
+#define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_CNTRL 0x020
#define QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5 0x084
#define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS 0x090
#define QPHY_V5_20_PCS_PCIE_EQ_CONFIG1 0x0a0
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
index e3eb08776339..f7abe95c49ad 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
@@ -10,6 +10,7 @@
#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2 0x00c
#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG 0x018
#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE 0x01c
+#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_CNTRL 0x020
#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS 0x090
#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1 0x0a0
#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5 0x108

--
2.42.0