Re: [PATCH v1] ARM: dts: imx: tqma7: add lm75a sensor (rev. 01xxx)

[Alexander Stein]

Hi,

Am Freitag, 3. November 2023, 22:07:08 CET schrieb Fabio Estevam:
> [Adding Bruno and Alexander]
> 
> On Thu, Nov 2, 2023 at 7:12 PM João Rodrigues <jrodrigues@xxxxxxxxxx> wrote:
> > From: João Rodrigues <jrodrigues@xxxxxxxxxx>
> > 
> > TQMa7x (revision 01xxx) uses a LM75A temperature sensor.
> > The two sensors use different I2C addresses, so we can set both sensors
> > simultaneously.

I've contacted responsible department and I am waiting for more details.

Best regards,
Alexander

> > Signed-off-by: João Rodrigues <jrodrigues@xxxxxxxxxx>
> > ---
> > 
> >  arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index
> > fe42b0a4683..3fc3130f9de 100644
> > --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
> > @@ -128,11 +128,16 @@ vgen6_reg: vldo4 {
> > 
> >                 };
> >         
> >         };
> > 
> > -       /* NXP SE97BTP with temperature sensor + eeprom */
> > +       /* LM75A temperature sensor, TQMa7x 01xx */
> > +       lm75a: temperature-sensor@48 {
> > +               compatible = "national,lm75a";
> > +               reg = <0x48>;
> > +       };
> > +
> > +       /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */
> > 
> >         se97b: temperature-sensor-eeprom@1e {
> >         
> >                 compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> >                 reg = <0x1e>;
> > 
> > -               status = "okay";
> > 
> >         };
> >         
> >         /* ST M24C64 */
> > 
> > --
> > 2.25.1


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/