RE: [PATCH v3 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver bindings

[Delphine_CC_Chiu/WYHQ/Wiwynn]

> -----Original Message-----
> From: Conor Dooley <conor@xxxxxxxxxx>
> Sent: Wednesday, November 1, 2023 1:06 AM
> To: Delphine_CC_Chiu/WYHQ/Wiwynn <Delphine_CC_Chiu@xxxxxxxxxx>
> Cc: patrick@xxxxxxxxx; Jean Delvare <jdelvare@xxxxxxxx>; Guenter Roeck
> <linux@xxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>;
> Jonathan Corbet <corbet@xxxxxxx>; linux-i2c@xxxxxxxxxxxxxxx;
> linux-hwmon@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-doc@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 1/2] dt-bindings: hwmon: Add lltc ltc4286 driver
> bindings
> 
> On Tue, Oct 31, 2023 at 03:21:21PM +0800, Delphine CC Chiu wrote:
> > Add a device tree bindings for ltc4286 device.
> >
> > Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> >
> > Changelog:
> >   v3 - Revise adi,vrange-select-25p6 to adi,vrange-low-enable
> >   v2 - Revise vrange_select_25p6 to adi,vrange-select-25p6
> >      - Add type for adi,vrange-select-25p6
> >      - Revise rsense-micro-ohms to shunt-resistor-micro-ohms
> > ---
> >  .../bindings/hwmon/lltc,ltc4286.yaml          | 52
> +++++++++++++++++++
> >  MAINTAINERS                                   | 10 ++++
> >  2 files changed, 62 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
> > b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
> > new file mode 100644
> > index 000000000000..4695bca77c05
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/hwmon/lltc,ltc4286.yaml
> > @@ -0,0 +1,52 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/hwmon/lltc,ltc4286.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: LTC4286 power monitors
> > +
> > +maintainers:
> > +  - Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - lltc,ltc4286
> > +      - lltc,ltc4287
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  adi,vrange-low-enable:
> > +    description:
> > +      This property is a bool parameter to represent the
> > +      voltage range is 25.6 volts or 102.4 volts for
> > +      this chip.
> > +      The default is 102.4 volts.
> 
> You've got weird wrapping of text here (short lines). Either this property or the
> corollary work for me, depending on what Guenter wants. With two nits
> below,
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

We will revise to
adi,vrange-low-enable:
  description:
    This property is a bool parameter to represent the
    voltage range is 25.6 volts or 102.4 volts for this chip.

> 
> 
> > +    type: boolean
> > +
> > +  shunt-resistor-micro-ohms:
> > +    description:
> > +      Resistor value in micro-Ohm
> 
> micro-ohms

We will revise to micro-ohms

> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - shunt-resistor-micro-ohms
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        power-sensor@40 {
> 
> the generic node name is "power-monitor".


We will revise to power-monitor@40

> 
> Cheers,
> Conor.