Re: [PATCH net] net: phylink: initialize carrier state at creation

[Russell King (Oracle)]

On Mon, Nov 06, 2023 at 07:05:06PM +0100, Klaus Kudielka wrote:
> Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
> SFP module is present, but no fiber connected, so definitely no carrier.
> 
> After booting, eth2 is down, but netdev LED trigger surprisingly reports
> link active. Then, after "ip link set eth2 up", the link indicator goes
> away - as I would have expected it from the beginning.
> 
> It turns out, that the default carrier state after netdev creation is
> "carrier ok". Some ethernet drivers explicitly call netif_carrier_off
> during probing, others (like mvneta) don't - which explains the current
> behaviour: only when the device is brought up, phylink_start calls
> netif_carrier_off.
> 
> Fix this for all drivers, by calling netif_carrier_off in phylink_create.
> 
> Suggested-by: Andrew Lunn <andrew@xxxxxxx>
> Signed-off-by: Klaus Kudielka <klaus.kudielka@xxxxxxxxx>

Reviewed-by: Russell King (Oracle) <rmk+kernel@xxxxxxxxxxxxxxx>

Thanks!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!