Re: [PATCH v3 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Frank Li]

On Thu, Nov 02, 2023 at 10:58:09PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Oct 17, 2023 at 03:31:43PM -0400, Frank Li wrote:
> > ls1021a add suspend/resume support.
> > 
> > Implement callback ls1021a_pcie_send_turnoff_msg(), which write scfg's
> > SCFG_PEXPMWRCR to issue PME_Turn_off message.
> > 
> > Implement ls1021a_pcie_exit_from_l2() to let controller exit L2 state.
> > 
> 
> I'd like to reword it to better reflect what the patch does:
> 
> "In the suspend path, PME_Turn_Off message is sent to the endpoint to transition
> the link to L2/L3_Ready state. In this SoC, there is no way to check if the
> controller has received the PME_To_Ack from the endpoint or not. So to be on the
> safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US before asserting
> the SoC specific PMXMTTURNOFF bit to complete the PME_Turn_Off handshake. This
> link would then enter L2/L3 state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset."
> 
> Although I do have questions on the resume behavior below.
> 
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > 
> > Notes:
> >     Change from v2 to v3
> >     - update according to mani's feedback
> >     change from v1 to v2
> >     - change subject 'a' to 'A'
> > 
> >  drivers/pci/controller/dwc/pci-layerscape.c | 86 ++++++++++++++++++++-
> >  1 file changed, 85 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index aea89926bcc4f..6f47cfe146c44 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -35,11 +35,21 @@
> >  #define PF_MCR_PTOMR		BIT(0)
> >  #define PF_MCR_EXL2S		BIT(1)
> >  
> > +/* LS1021A PEXn PM Write Control Register */
> > +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> > +#define PMXMTTURNOFF		BIT(31)
> > +#define SCFG_PEXSFTRSTCR	0x190
> > +#define PEXSR(idx)		BIT(idx)
> > +
> >  #define PCIE_IATU_NUM		6
> >  
> > +#define LS_PCIE_DRV_SCFG	BIT(0)
> > +
> >  struct ls_pcie_drvdata {
> >  	const u32 pf_off;
> > +	const struct dw_pcie_host_ops *ops;
> >  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> > +	int flags;
> 
> Why not "bool scfg_support"?

It will be easy to add new flag if need in future.

> 
> >  	bool pm_support;
> >  };
> >  
> > @@ -47,6 +57,8 @@ struct ls_pcie {
> >  	struct dw_pcie *pci;
> >  	const struct ls_pcie_drvdata *drvdata;
> >  	void __iomem *pf_base;
> > +	struct regmap *scfg;
> > +	int index;
> >  	bool big_endian;
> >  };
> >  
> > @@ -171,13 +183,65 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> >  	return 0;
> >  }
> >  
> > +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> > +	/* Send PME_Turn_Off message */
> > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > +	val |= PMXMTTURNOFF;
> > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +
> > +	/*
> > +	 * There is no specific register to check for PME_To_Ack from endpoint.
> > +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> > +	 */
> > +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > +
> > +	/*
> > +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> > +	 * to complete the PME_Turn_Off handshake.
> > +	 */
> > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > +	val &= ~PMXMTTURNOFF;
> > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > +}
> > +
> > +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > +	u32 val;
> > +
> > +	/* Only way exit from l2 is that do software reset */
> 
> So, what does exactly "software reset" mean? Are you resetting the endpoint or
> some specific registers/blocks in the controlleri?

No, it is PCIe controller reset. Not touch endpoint.

> 
> Also, what if the link goes to L3 in the case of no VAUX?

I am not exactly sure. it should be related with board design. I supposed
not big difference!

We can improve it when we met it.

> 
> > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > +	val |= PEXSR(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > +	val &= ~PEXSR(pcie->index);
> > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > +
> > +	return 0;
> > +}
> > +
> >  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> >  	.host_init = ls_pcie_host_init,
> >  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> >  };
> >  
> > +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> > +	.host_init = ls_pcie_host_init,
> > +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> > +};
> > +
> >  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > -	.pm_support = false,
> > +	.pm_support = true,
> > +	.ops = &ls1021a_pcie_host_ops,
> > +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
> > +	.flags = LS_PCIE_DRV_SCFG,
> >  };
> >  
> >  static const struct ls_pcie_drvdata layerscape_drvdata = {
> > @@ -205,6 +269,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  	struct dw_pcie *pci;
> >  	struct ls_pcie *pcie;
> >  	struct resource *dbi_base;
> > +	u32 index[2];
> > +	int ret;
> >  
> >  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> >  	if (!pcie)
> > @@ -220,6 +286,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  	pci->pp.ops = &ls_pcie_host_ops;
> >  
> >  	pcie->pci = pci;
> > +	pci->pp.ops = pcie->drvdata->ops ? pcie->drvdata->ops : &ls_pcie_host_ops;
> >  
> >  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
> >  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> > @@ -230,6 +297,23 @@ static int ls_pcie_probe(struct platform_device *pdev)
> >  
> >  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> >  
> > +	if (pcie->drvdata->flags & LS_PCIE_DRV_SCFG) {
> > +
> 
> Remove extra newline.
> 
> - Mani
> 
> -- 
> மணிவண்ணன் சதாசிவம்