[PATCH net-next 4/5] net: ipqess: add a PSGMII calibration procedure to the IPQESS driver
From: Romain Gantois
Date: Mon Oct 23 2023 - 11:50:36 EST
The IPQ4019 Ethernet Switch Subsystem uses a PSGMII link to communicate
with a QCA8075 5-port PHY. This 1G link requires calibration before it can
be used reliably.
This commit introduces a calibration procedure followed by thourough
testing of the link between each switch port and its corresponding PHY
port.
Signed-off-by: Romain Gantois <romain.gantois@xxxxxxxxxxx>
---
drivers/net/ethernet/qualcomm/ipqess/Makefile | 2 +-
.../ethernet/qualcomm/ipqess/ipqess_calib.c | 495 ++++++++++++++++++
.../ethernet/qualcomm/ipqess/ipqess_port.c | 3 +-
.../ethernet/qualcomm/ipqess/ipqess_port.h | 4 +
4 files changed, 502 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/ethernet/qualcomm/ipqess/ipqess_calib.c
diff --git a/drivers/net/ethernet/qualcomm/ipqess/Makefile b/drivers/net/ethernet/qualcomm/ipqess/Makefile
index 51d7163ef0fc..110f6003f04b 100644
--- a/drivers/net/ethernet/qualcomm/ipqess/Makefile
+++ b/drivers/net/ethernet/qualcomm/ipqess/Makefile
@@ -5,4 +5,4 @@
obj-$(CONFIG_QCOM_IPQ4019_ESS) += ipqess.o
-ipqess-objs := ipqess_port.o ipqess_switch.o ipqess_notifiers.o ipqess_edma.o
+ipqess-objs := ipqess_port.o ipqess_switch.o ipqess_notifiers.o ipqess_edma.o ipqess_calib.o
diff --git a/drivers/net/ethernet/qualcomm/ipqess/ipqess_calib.c b/drivers/net/ethernet/qualcomm/ipqess/ipqess_calib.c
new file mode 100644
index 000000000000..ca9b5593a200
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess_calib.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Calibration procedure for the IPQ4019 PSGMII link
+ *
+ * Copyright (C) 2009 Felix Fietkau <nbd@xxxxxxxx>
+ * Copyright (C) 2011-2012, 2020-2021 Gabor Juhos <juhosg@xxxxxxxxxxx>
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john@xxxxxxxxxxx>
+ * Copyright (c) 2022 Robert Marko <robert.marko@xxxxxxxxxx>
+ * Copyright (c) 2023 Romain Gantois <romain.gantois@xxxxxxxxxxx>
+ */
+
+#include <linux/dsa/qca8k.h>
+#include <linux/phylink.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/regmap.h>
+
+#include "ipqess_port.h"
+
+/* Nonstandard MII registers for the psgmii
+ * device on the IPQ4019 MDIO bus.
+ */
+
+#define PSGMII_RSTCTRL 0x0 /* Reset control register */
+#define PSGMII_RSTCTRL_RST BIT(6)
+#define PSGMII_RSTCTRL_RX20 BIT(2) /* Fix/release RX 20 bit */
+
+#define PSGMII_CDRCTRL 0x1a /* Clock and data recovery control register */
+#define PSGMII_CDRCTRL_RELEASE BIT(12)
+
+#define PSGMII_VCO_CALIB_CTRL 0x28 /* VCO PLL calibration */
+#define PSGMII_VCO_CALIB_READY BIT(0)
+
+/* Delays and timeouts */
+
+#define PSGMII_WAIT_AFTER_CALIB 50
+#define PSGMII_WAIT_AFTER_RELEASE 200
+#define PSGMII_VCO_CALIB_INTERVAL 1000000
+#define PSGMII_VCO_CALIB_TIMEOUT 10000
+#define PSGMII_CALIB_RETRIES 50
+#define PSGMII_CALIB_RETRIES_BURST 5
+#define PSGMII_CALIB_RETRY_DELAY 100
+
+/* Calibration data */
+
+struct psgmii_port_data {
+ struct list_head list;
+ struct phy_device *phy;
+ int id;
+
+ /* calibration test results */
+ u32 test_ok;
+ u32 tx_loss;
+ u32 rx_loss;
+ u32 tx_errors;
+ u32 rx_errors;
+};
+
+static LIST_HEAD(calib);
+
+static int psgmii_vco_calibrate(struct qca8k_priv *priv)
+{
+ int val, ret;
+
+ if (!priv->psgmii_ethphy) {
+ dev_err(priv->dev,
+ "PSGMII eth PHY missing, calibration failed!\n");
+ return -ENODEV;
+ }
+
+ /* Fix PSGMII RX 20bit */
+ ret = phy_clear_bits(priv->psgmii_ethphy, PSGMII_RSTCTRL,
+ PSGMII_RSTCTRL_RX20);
+ /* Reset PHY PSGMII */
+ ret = phy_clear_bits(priv->psgmii_ethphy, PSGMII_RSTCTRL,
+ PSGMII_RSTCTRL_RST);
+ /* Release PHY PSGMII reset */
+ ret = phy_set_bits(priv->psgmii_ethphy, PSGMII_RSTCTRL,
+ PSGMII_RSTCTRL_RST);
+
+ /* Poll for VCO PLL calibration finish - Malibu(QCA8075) */
+ ret = phy_read_mmd_poll_timeout(priv->psgmii_ethphy,
+ MDIO_MMD_PMAPMD,
+ PSGMII_VCO_CALIB_CTRL,
+ val,
+ val & PSGMII_VCO_CALIB_READY,
+ PSGMII_VCO_CALIB_INTERVAL,
+ PSGMII_VCO_CALIB_TIMEOUT,
+ false);
+ if (ret) {
+ dev_err(priv->dev,
+ "QCA807x PSGMII VCO calibration PLL not ready\n");
+ return ret;
+ }
+ mdelay(PSGMII_WAIT_AFTER_CALIB);
+
+ /* Freeze PSGMII RX CDR */
+ ret = phy_clear_bits(priv->psgmii_ethphy, PSGMII_CDRCTRL,
+ PSGMII_CDRCTRL_RELEASE);
+
+ /* Start PSGMIIPHY VCO PLL calibration */
+ ret = regmap_set_bits(priv->psgmii,
+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1,
+ PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART);
+
+ /* Poll for PSGMIIPHY PLL calibration finish - Dakota(IPQ40xx) */
+ ret = regmap_read_poll_timeout(priv->psgmii,
+ PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2,
+ val,
+ val & PSGMIIPHY_REG_PLL_VCO_CALIB_READY,
+ PSGMII_VCO_CALIB_INTERVAL,
+ PSGMII_VCO_CALIB_TIMEOUT);
+ if (ret) {
+ dev_err(priv->dev,
+ "IPQ PSGMIIPHY VCO calibration PLL not ready\n");
+ return ret;
+ }
+ mdelay(PSGMII_WAIT_AFTER_CALIB);
+
+ /* Release PSGMII RX CDR */
+ ret = phy_set_bits(priv->psgmii_ethphy, PSGMII_CDRCTRL,
+ PSGMII_CDRCTRL_RELEASE);
+ /* Release PSGMII RX 20bit */
+ ret = phy_set_bits(priv->psgmii_ethphy, PSGMII_RSTCTRL,
+ PSGMII_RSTCTRL_RX20);
+ mdelay(PSGMII_WAIT_AFTER_RELEASE);
+
+ return ret;
+}
+
+static int
+qca8k_wait_for_phy_link_state(struct phy_device *phy, int need_link)
+{
+ u16 status;
+ int ret;
+
+ ret = phy_read_poll_timeout(phy, MII_QCA8075_SSTATUS, status,
+ !!(status & QCA8075_PHY_SPEC_STATUS_LINK) == need_link,
+ MII_QCA8075_SSTATUS_WAIT, MII_QCA8075_SSTATUS_TIMEOUT, 1);
+ if (ret == -ETIMEDOUT)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void
+psgmii_phy_loopback_enable(struct qca8k_priv *priv, struct phy_device *phy,
+ int sw_port)
+{
+ phy_write(phy, MII_BMCR, BMCR_ANENABLE | BMCR_RESET);
+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN);
+ qca8k_wait_for_phy_link_state(phy, 0);
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0);
+ phy_write(phy, MII_BMCR,
+ BMCR_SPEED1000
+ | BMCR_FULLDPLX
+ | BMCR_LOOPBACK);
+ qca8k_wait_for_phy_link_state(phy, 1);
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port),
+ QCA8K_PORT_STATUS_SPEED_1000
+ | QCA8K_PORT_STATUS_TXMAC
+ | QCA8K_PORT_STATUS_RXMAC
+ | QCA8K_PORT_STATUS_DUPLEX);
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port),
+ QCA8K_PORT_LOOKUP_STATE_FORWARD,
+ QCA8K_PORT_LOOKUP_STATE_FORWARD);
+}
+
+static void
+psgmii_phy_loopback_disable(struct qca8k_priv *priv, struct phy_device *phy,
+ int sw_port)
+{
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0);
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port),
+ QCA8K_PORT_LOOKUP_STATE_DISABLED,
+ QCA8K_PORT_LOOKUP_STATE_DISABLED);
+ phy_write(phy, MII_BMCR,
+ BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_RESET);
+ /* turn off the power of the phys - so that unused
+ * ports do not raise links
+ */
+ phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN);
+}
+
+static void
+qca8k_wait_for_phy_pkt_gen_fin(struct qca8k_priv *priv, struct phy_device *phy)
+{
+ int val;
+
+ /* Wait for all traffic to end:
+ * 4096(pkt num)*1524(size)*8ns(125MHz)=49938us
+ */
+ phy_read_mmd_poll_timeout(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL,
+ val, !(val & QCA8075_MMD7_PKT_GEN_INPROGR),
+ 50000, 1000000, true);
+}
+
+static int
+psgmii_start_parallel_pkt_gen(struct qca8k_priv *priv)
+{
+ struct phy_device *phy;
+
+ phy = phy_device_create(priv->bus, QCA8075_MDIO_BRDCST_PHY_ADDR,
+ 0, 0, NULL);
+ if (!phy) {
+ dev_err(priv->dev,
+ "unable to create mdio broadcast PHY(0x%x)\n",
+ QCA8075_MDIO_BRDCST_PHY_ADDR);
+ return -ENODEV;
+ }
+
+ /* start packet generation */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL,
+ QCA8075_MMD7_PKT_GEN_START | QCA8075_MMD7_PKT_GEN_INPROGR);
+
+ phy_device_free(phy);
+ return 0;
+}
+
+static void
+qca8k_get_phy_pkt_gen_test_result(struct psgmii_port_data *port_data)
+{
+ struct phy_device *phy = port_data->phy;
+ u32 tx_all_ok, rx_all_ok;
+ u32 tx_ok, tx_errors;
+ u32 rx_ok, rx_errors;
+ u32 tx_ok_high16;
+ u32 rx_ok_high16;
+
+ /* check counters */
+ tx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_LO);
+ tx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN,
+ QCA8075_MMD7_EG_FRAME_RECV_CNT_HI);
+ tx_errors = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_ERR_CNT);
+ rx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_LO);
+ rx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN,
+ QCA8075_MMD7_IG_FRAME_RECV_CNT_HI);
+ rx_errors = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_ERR_CNT);
+ tx_all_ok = tx_ok + (tx_ok_high16 << 16);
+ rx_all_ok = rx_ok + (rx_ok_high16 << 16);
+
+ port_data->tx_loss = QCA8075_PKT_GEN_PKTS_COUNT - tx_all_ok;
+ port_data->rx_loss = QCA8075_PKT_GEN_PKTS_COUNT - rx_all_ok;
+ port_data->tx_errors = tx_errors;
+ port_data->rx_errors = rx_errors;
+ port_data->test_ok = !(port_data->tx_loss | port_data->rx_loss | tx_errors | rx_errors);
+}
+
+static void psgmii_port_cleanup_test(struct qca8k_priv *priv,
+ struct psgmii_port_data *port_data)
+{
+ struct phy_device *phy = port_data->phy;
+ int port_id = port_data->id;
+
+ /* set packet count to 0 */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, 0);
+
+ /* disable CRC checker and packet counter */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0);
+
+ /* disable traffic gen */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, 0);
+
+ /* disable broadcasts on MDIO bus */
+ phy_clear_bits_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE,
+ QCA8075_MMD7_MDIO_BRDCST_WRITE_EN);
+
+ /* disable loopback on switch port and PHY */
+ qca8k_clear_bits(priv, QCA8K_PORT_LOOKUP_CTRL(port_id),
+ QCA8K_PORT_LOOKUP_LOOPBACK_EN);
+ psgmii_phy_loopback_disable(priv, phy, port_id);
+}
+
+static void psgmii_port_prep_test(struct qca8k_priv *priv,
+ struct psgmii_port_data *port_data)
+{
+ struct phy_device *phy = port_data->phy;
+ int port_id = port_data->id;
+
+ /* put PHY and switch port in loopback */
+ psgmii_phy_loopback_enable(priv, phy, port_id);
+ qca8k_set_bits(priv, QCA8K_PORT_LOOKUP_CTRL(port_id),
+ QCA8K_PORT_LOOKUP_LOOPBACK_EN);
+
+ /* enable broadcasts on MDIO bus */
+ phy_set_bits_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE,
+ QCA8075_MMD7_MDIO_BRDCST_WRITE_EN);
+
+ /* enable PHY CRC checker and packet counters */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT,
+ QCA8075_MMD7_CNT_FRAME_CHK_EN | QCA8075_MMD7_CNT_SELFCLR);
+ qca8k_wait_for_phy_link_state(phy, 1);
+
+ /* set number of packets to send during the test */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB,
+ QCA8075_PKT_GEN_PKTS_COUNT);
+ /* set packet size */
+ phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_SIZE,
+ QCA8075_PKT_GEN_PKTS_SIZE);
+}
+
+static int psgmii_link_parallel_test(struct qca8k_priv *priv)
+{
+ struct psgmii_port_data *port_data;
+ bool test_failed = false;
+
+ list_for_each_entry(port_data, &calib, list) {
+ /* prep switch port for test */
+ psgmii_port_prep_test(priv, port_data);
+ }
+
+ psgmii_start_parallel_pkt_gen(priv);
+
+ list_for_each_entry(port_data, &calib, list) {
+ /* wait for test results */
+ qca8k_wait_for_phy_pkt_gen_fin(priv, port_data->phy);
+ qca8k_get_phy_pkt_gen_test_result(port_data);
+
+ if (!port_data->test_ok) {
+ dev_dbg(priv->dev,
+ "PSGMII calibration: failed parallel test on port %d errors: %d %d %d %d\n",
+ port_data->id, port_data->tx_loss, port_data->rx_loss,
+ port_data->tx_errors, port_data->rx_errors);
+
+ test_failed = true;
+ }
+
+ psgmii_port_cleanup_test(priv, port_data);
+ }
+
+ return test_failed;
+}
+
+static int psgmii_link_serial_test(struct qca8k_priv *priv)
+{
+ struct psgmii_port_data *port_data;
+ bool test_failed = false;
+
+ list_for_each_entry(port_data, &calib, list) {
+ /* prep switch port for test */
+ psgmii_port_prep_test(priv, port_data);
+
+ /* start packet generation */
+ phy_write_mmd(port_data->phy,
+ MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL,
+ QCA8075_MMD7_PKT_GEN_START |
+ QCA8075_MMD7_PKT_GEN_INPROGR);
+
+ /* wait for test results */
+ qca8k_wait_for_phy_pkt_gen_fin(priv, port_data->phy);
+ qca8k_get_phy_pkt_gen_test_result(port_data);
+
+ if (!port_data->test_ok) {
+ dev_dbg(priv->dev,
+ "PSGMII calibration: failed serial test on port %d errors: %d %d %d %d\n",
+ port_data->id, port_data->tx_loss, port_data->rx_loss,
+ port_data->tx_errors, port_data->rx_errors);
+
+ test_failed = true;
+ }
+
+ psgmii_port_cleanup_test(priv, port_data);
+ }
+
+ return test_failed;
+}
+
+static void psgmii_free_calib_data(void)
+{
+ struct psgmii_port_data *port_data, *temp;
+
+ list_for_each_entry_safe(port_data, temp, &calib, list) {
+ list_del(&port_data->list);
+ kfree(port_data);
+ }
+}
+
+static int psgmii_alloc_calib_data(struct qca8k_priv *priv)
+{
+ struct device_node *phy_dn, *ports, *port_dn;
+ struct psgmii_port_data *port_data;
+ struct phy_device *phy;
+ int err, port_id;
+
+ /* get port data from device tree */
+ ports = of_get_child_by_name(priv->dev->of_node, "ports");
+ if (!ports) {
+ dev_err(priv->dev, "no ports child node found\n");
+ return -EINVAL;
+ }
+ for_each_available_child_of_node(ports, port_dn) {
+ /* alloc port data */
+ port_data = kzalloc(sizeof(port_data), GFP_KERNEL);
+ if (!port_data) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ list_add(&port_data->list, &calib);
+
+ /* get port ID */
+ err = of_property_read_u32(port_dn, "reg", &port_id);
+ if (err) {
+ dev_err(priv->dev, "error: missing 'reg' property in device node\n");
+ goto out_free;
+ }
+
+ if (port_id >= QCA8K_NUM_PORTS) {
+ dev_err(priv->dev, "error: port ID out of range\n");
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ /* get PHY device */
+ phy_dn = of_parse_phandle(port_dn, "phy-handle", 0);
+ if (!phy_dn) {
+ dev_err(priv->dev, "error: missing 'phy-handle' property in device node\n");
+ err = -EINVAL;
+ goto out_free;
+ }
+ phy = of_phy_find_device(phy_dn);
+ of_node_put(phy_dn);
+ if (!phy) {
+ dev_err(priv->dev,
+ "error: unable to fetch PHY device for port %d\n",
+ port_id);
+ err = -EINVAL;
+ goto out_free;
+ }
+
+ port_data->phy = phy;
+ port_data->id = port_id;
+ }
+
+ return 0;
+
+out_free:
+ psgmii_free_calib_data();
+ return err;
+}
+
+int psgmii_calibrate_and_test(struct qca8k_priv *priv)
+{
+ struct psgmii_port_data *port_data;
+ bool test_failed = false;
+ int ret, attempt;
+
+ ret = psgmii_alloc_calib_data(priv);
+ if (ret)
+ return ret;
+
+ for (attempt = 0; attempt <= PSGMII_CALIB_RETRIES; attempt++) {
+ /* first we run the VCO calibration */
+ ret = psgmii_vco_calibrate(priv);
+ if (ret)
+ goto out_free;
+
+ /* then, we test the link */
+ test_failed = psgmii_link_serial_test(priv);
+ if (!test_failed)
+ test_failed = psgmii_link_parallel_test(priv);
+
+ qca8k_fdb_flush(priv);
+
+ if (!test_failed) {
+ dev_dbg(priv->dev,
+ "PSGMII link stabilized after %d attempts\n",
+ attempt + 1);
+ ret = 0;
+ goto out_free;
+ }
+
+ /* On tested hardware, the link often stabilizes in 4 or 5 retries.
+ * If it still isn't stable, we wait a bit, then try another set
+ * of calibration attempts.
+ */
+ dev_warn(priv->dev, "PSGMII link is unstable! Retrying... %d/QCA8K_PSGMII_CALIB_RETRIES\n",
+ attempt + 1);
+ if (attempt % PSGMII_CALIB_RETRIES_BURST == 0)
+ schedule_timeout_interruptible(msecs_to_jiffies(PSGMII_CALIB_RETRY_DELAY));
+ else
+ schedule();
+ }
+
+ dev_err(priv->dev, "PSGMII work is unstable! Repeated recalibration attempts did not help!\n");
+ ret = -EFAULT;
+
+out_free:
+ list_for_each_entry(port_data, &calib, list) {
+ put_device(&port_data->phy->mdio.dev);
+ }
+ psgmii_free_calib_data();
+ return ret;
+}
diff --git a/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.c b/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.c
index 95407a008971..757d937dd711 100644
--- a/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.c
+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.c
@@ -1315,7 +1315,8 @@ ipqess_psgmii_configure(struct qca8k_priv *priv)
int ret;
if (!atomic_fetch_inc(&priv->psgmii_calibrated)) {
- dev_warn(priv->dev, "Unable to calibrate PSGMII, link will be unstable!\n");
+ dev_dbg(priv->dev, "starting PSGMII calibration...\n");
+ psgmii_calibrate_and_test(priv);
ret = regmap_clear_bits(priv->psgmii, PSGMIIPHY_MODE_CONTROL,
PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M);
diff --git a/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.h b/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.h
index a0639933e8bb..6e6a5d15f588 100644
--- a/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.h
+++ b/drivers/net/ethernet/qualcomm/ipqess/ipqess_port.h
@@ -92,4 +92,8 @@ int ipqess_port_obj_del(struct net_device *netdev, const void *ctx,
bool ipqess_port_offloads_bridge_port(struct ipqess_port *port,
const struct net_device *netdev);
+
+/* Defined in ipqess_calib.c */
+int psgmii_calibrate_and_test(struct qca8k_priv *priv);
+
#endif
--
2.42.0