Re: [PATCH v2] i2c: stm32f7: Fix PEC handling in case of SMBUS transfers

[Wolfram Sang]

On Tue, Oct 10, 2023 at 10:44:54AM +0200, Alain Volmat wrote:
> In case of SMBUS byte read with PEC enabled, the whole transfer
> is split into two commands.  A first write command, followed by
> a read command.  The write command does not have any PEC byte
> and a PEC byte is appended at the end of the read command.
> (cf Read byte protocol with PEC in SMBUS specification)
> 
> Within the STM32 I2C controller, handling (either sending
> or receiving) of the PEC byte is done via the PECBYTE bit in
> register CR2.
> 
> Currently, the PECBYTE is set at the beginning of a transfer,
> which lead to sending a PEC byte at the end of the write command
> (hence losing the real last byte), and also does not check the
> PEC byte received during the read command.
> 
> This patch corrects the function stm32f7_i2c_smbus_xfer_msg
> in order to only set the PECBYTE during the read command.
> 
> Fixes: 9e48155f6bfe ("i2c: i2c-stm32f7: Add initial SMBus protocols support")
> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>

Applied to for-current, thanks!

BTW, there are some patches pending from this series for stm32f4/7. Do
you have time for an ack?

http://patchwork.ozlabs.org/project/linux-i2c/list/?series=359230

Attachment: signature.asc
Description: PGP signature