Re: [PATCH net-next v3 2/2] net: phy: micrel: Fix forced link mode for KSZ886X switches

[Vladimir Oltean]

On Thu, Oct 19, 2023 at 01:14:59PM +0200, Oleksij Rempel wrote:
> Address a link speed detection issue in KSZ886X PHY driver when in
> forced link mode. Previously, link partners like "ASIX AX88772B"
> with KSZ8873 could fall back to 10Mbit instead of configured 100Mbit.
> 
> The issue arises as KSZ886X PHY continues sending Fast Link Pulses (FLPs)
> even with autonegotiation off, misleading link partners in autoneg mode,
> leading to incorrect link speed detection.
> 
> Now, when autonegotiation is disabled, the driver sets the link state
> forcefully using KSZ886X_CTRL_FORCE_LINK bit. This action, beyond just
> disabling autonegotiation, makes the PHY state more reliably detected by
> link partners using parallel detection, thus fixing the link speed
> misconfiguration.
> 
> With autonegotiation enabled, link state is not forced, allowing proper
> autonegotiation process participation.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>