Re: [PATCH 2/4] arm64: dts: qcom: qcm6490-fairphone-fp5: Add PM7250B thermals
From: Konrad Dybcio
Date: Wed Oct 18 2023 - 16:31:47 EST
On 10/13/23 10:09, Luca Weiss wrote:
Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM
thermistors connected to PM7250B.
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 66 ++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index 2de0b8c26c35..7fe19b556e6a 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -134,6 +134,36 @@ afvdd_2p8: regulator-afvdd-2p8 {
enable-active-high;
vin-supply = <&vreg_bob>;
};
+
+ thermal-zones {
+ chg-skin-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&pm7250b_adc_tm 0>;
+
+ trips {
+ active-config0 {
+ temperature = <125000>;
I guess looking at skin-temp-thermal in x13s dts for starters
is a good idea.. we should probably then adjust it to something
more pocketable..
Konrad