Re: [PATCH V3 4/4] arm64: dts: qcom: ipq5018: Add tsens node

[Sricharan Ramabadhran]

On 10/5/2023 12:38 AM, Robert Marko wrote:
> On 22. 09. 2023. 13:51, Sricharan R wrote:
> > From: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> >
> > IPQ5018 has tsens V1.0 IP with 4 sensors.
> > There is no RPM, so tsens has to be manually enabled. Adding the tsens
> > and nvmem node and IPQ5018 has 4 thermal sensors (zones). With the
> > critical temperature being 120'C and action is to reboot. Adding all
> > the 4 zones here.
> >
> > Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> > ---
> >   [v3] Ordered the qfprom device node properties as per
> >        Krzysztof's comments
> >
> >   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++++++++++
> >   1 file changed, 169 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi 
> > b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > index 9f13d2dcdfd5..9e28b54ebcbd 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> > @@ -93,6 +93,117 @@ soc: soc@0 {
> >           #size-cells = <1>;
> >           ranges = <0 0 0 0xffffffff>;
> > +        qfprom: qfprom@a0000 {
> > +            compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
> Hi,
>
> "qcom,ipq5018-qfprom" needs to be documented in QFPROM bindings first.

 Already posted here [1]. Initially had it in the same series, but kept
 it separately based on review comments.

 [1] https://www.spinics.net/lists/devicetree/msg633408.html

Regards,
 Sricharan