[PATCH net-next V1 4/7] net: lan743x: Add support to software-nodes for sfp and phylink
From: Raju Lakkaraju
Date: Tue Oct 17 2023 - 05:44:03 EST
Register software nodes and define the device properties.
software-node contains following properties.
- gpio pin details
- i2c bus information
- sfp signals
- phylink mode
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
---
drivers/net/ethernet/microchip/Kconfig | 5 +-
drivers/net/ethernet/microchip/lan743x_main.c | 235 +++++++++++++++++-
drivers/net/ethernet/microchip/lan743x_main.h | 36 +++
3 files changed, 272 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index 43ba71e82260..c50970705e88 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -50,8 +50,11 @@ config LAN743X
select FIXED_PHY
select CRC16
select CRC32
+ select I2C_PCI1XXXX
+ select GP_PCI1XXXX
help
- Support for the Microchip LAN743x PCI Express Gigabit Ethernet chip
+ Support for the Microchip LAN743x and PCI11x1x families of PCI
+ Express Ethernet devices
To compile this driver as a module, choose M here. The module will be
called lan743x.
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index eee3fe7e0c66..71cce7722a21 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -15,6 +15,9 @@
#include <linux/rtnetlink.h>
#include <linux/iopoll.h>
#include <linux/crc16.h>
+#include <linux/i2c.h>
+#include <linux/gpio/machine.h>
+#include <linux/auxiliary_bus.h>
#include "lan743x_main.h"
#include "lan743x_ethtool.h"
@@ -24,6 +27,46 @@
#define MMD_ACCESS_READ_INC 3
#define PCS_POWER_STATE_DOWN 0x6
#define PCS_POWER_STATE_UP 0x4
+#define PCI1XXXX_VENDOR_ID 0x1055
+#define PCI1XXXX_BR_PERIF_ID 0xA00C
+#define PCI1XXXX_PERIF_I2C_ID 0xA003
+#define PCI1XXXX_PERIF_GPIO_ID 0xA005
+#define PCI1XXXX_DEV_MASK GENMASK(7, 4)
+#define PCI11X1X_TX_FAULT_GPIO 46
+#define PCI11X1X_TX_DIS_GPIO 47
+#define PCI11X1X_RATE_SEL0_GPIO 48
+#define PCI11X1X_LOS_GPIO 49
+#define PCI11X1X_MOD_DEF0_GPIO 51
+
+#define NODE_PROP(_NAME, _PROP) \
+ ((const struct software_node) { \
+ .name = _NAME, \
+ .properties = _PROP, \
+ })
+
+struct pci1xxxx_i2c {
+ struct completion i2c_xfer_done;
+ bool i2c_xfer_in_progress;
+ struct i2c_adapter adap;
+ void __iomem *i2c_base;
+ u32 freq;
+ u32 flags;
+};
+
+struct gp_aux_data_type {
+ int irq_num;
+ resource_size_t region_start;
+ resource_size_t region_length;
+};
+
+struct auxiliary_device_wrapper {
+ struct auxiliary_device aux_dev;
+ struct gp_aux_data_type gp_aux_data;
+};
+
+struct aux_bus_device {
+ struct auxiliary_device_wrapper *aux_device_wrapper[2];
+};
static int pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
{
@@ -105,6 +148,91 @@ static void lan743x_pci_cleanup(struct lan743x_adapter *adapter)
pci_disable_device(adapter->pdev);
}
+static void *pci1xxxx_perif_drvdata_get(struct lan743x_adapter *adapter,
+ u16 perif_id)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct pci_bus *perif_bus;
+ struct pci_dev *perif_dev;
+ struct pci_dev *br_dev;
+ struct pci_bus *br_bus;
+ struct pci_dev *dev;
+
+ /* PCI11x1x devices' PCIe topology consists of a top level pcie
+ * switch with up to four downstream ports, some of which have
+ * integrated endpoints connected to them. One of the downstream ports
+ * has an embedded single function pcie ethernet controller which is
+ * handled by this driver. Another downstream port has an
+ * embedded multifunction pcie endpoint, with four pcie functions
+ * (the "peripheral controllers": I2C controller, GPIO controller,
+ * UART controllers, SPIcontrollers)
+ * The code below navigates the PCI11x1x topology
+ * to find (by matching its PCI device ID) the peripheral controller
+ * that should be paired to the embedded ethernet controller.
+ */
+ br_dev = pci_upstream_bridge(pdev);
+ if (!br_dev) {
+ netif_err(adapter, drv, adapter->netdev,
+ "upstream bridge not found\n");
+ return br_dev;
+ }
+
+ br_bus = br_dev->bus;
+ list_for_each_entry(dev, &br_bus->devices, bus_list) {
+ if (dev->vendor == PCI1XXXX_VENDOR_ID &&
+ (dev->device & ~PCI1XXXX_DEV_MASK) ==
+ PCI1XXXX_BR_PERIF_ID) {
+ perif_bus = dev->subordinate;
+ list_for_each_entry(perif_dev, &perif_bus->devices,
+ bus_list) {
+ if (perif_dev->vendor == PCI1XXXX_VENDOR_ID &&
+ (perif_dev->device & ~PCI1XXXX_DEV_MASK) ==
+ perif_id)
+ return pci_get_drvdata(perif_dev);
+ }
+ }
+ }
+
+ netif_err(adapter, drv, adapter->netdev,
+ "pci1xxxx peripheral (0x%X) device not found\n", perif_id);
+
+ return NULL;
+}
+
+static int pci1xxxx_i2c_adapter_get(struct lan743x_adapter *adapter)
+{
+ struct pci1xxxx_i2c *i2c_drvdata;
+
+ i2c_drvdata = pci1xxxx_perif_drvdata_get(adapter, PCI1XXXX_PERIF_I2C_ID);
+ if (!i2c_drvdata)
+ return -EPROBE_DEFER;
+
+ adapter->i2c_adap = &i2c_drvdata->adap;
+ snprintf(adapter->nodes->i2c_name, sizeof(adapter->nodes->i2c_name),
+ adapter->i2c_adap->name);
+ netif_dbg(adapter, drv, adapter->netdev, "Found %s\n",
+ adapter->i2c_adap->name);
+
+ return 0;
+}
+
+static int pci1xxxx_gpio_dev_get(struct lan743x_adapter *adapter)
+{
+ struct aux_bus_device *aux_bus;
+ struct device *gpio_dev;
+
+ aux_bus = pci1xxxx_perif_drvdata_get(adapter, PCI1XXXX_PERIF_GPIO_ID);
+ if (!aux_bus)
+ return -EPROBE_DEFER;
+
+ gpio_dev = &aux_bus->aux_device_wrapper[1]->aux_dev.dev;
+ snprintf(adapter->nodes->gpio_name, sizeof(adapter->nodes->gpio_name),
+ dev_name(gpio_dev));
+ netif_dbg(adapter, drv, adapter->netdev, "Found %s\n",
+ adapter->nodes->gpio_name);
+ return 0;
+}
+
static int lan743x_pci_init(struct lan743x_adapter *adapter,
struct pci_dev *pdev)
{
@@ -3045,6 +3173,90 @@ static int lan743x_rx_open(struct lan743x_rx *rx)
return ret;
}
+static int lan743x_swnodes_register(struct lan743x_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct lan743x_sw_nodes *nodes;
+ struct software_node *swnodes;
+ int ret;
+ u32 id;
+
+ nodes = kzalloc(sizeof(*nodes), GFP_KERNEL);
+ if (!nodes)
+ return -ENOMEM;
+
+ adapter->nodes = nodes;
+
+ ret = pci1xxxx_gpio_dev_get(adapter);
+ if (ret < 0)
+ return ret;
+
+ ret = pci1xxxx_i2c_adapter_get(adapter);
+ if (ret < 0)
+ return ret;
+
+ id = (pdev->bus->number << 8) | pdev->devfn;
+ snprintf(nodes->sfp_name, sizeof(nodes->sfp_name),
+ "sfp-%d", id);
+ snprintf(nodes->phylink_name, sizeof(nodes->phylink_name),
+ "mchp-pci1xxxx-phylink-%d", id);
+
+ swnodes = nodes->swnodes;
+
+ nodes->gpio_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names",
+ "default");
+ swnodes[SWNODE_GPIO] = NODE_PROP(nodes->gpio_name, nodes->gpio_props);
+
+ nodes->tx_fault_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO],
+ PCI11X1X_TX_FAULT_GPIO,
+ GPIO_ACTIVE_HIGH);
+ nodes->tx_disable_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO],
+ PCI11X1X_TX_DIS_GPIO,
+ GPIO_ACTIVE_HIGH);
+ nodes->mod_def0_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO],
+ PCI11X1X_MOD_DEF0_GPIO,
+ GPIO_ACTIVE_LOW);
+ nodes->los_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO],
+ PCI11X1X_LOS_GPIO,
+ GPIO_ACTIVE_HIGH);
+ nodes->rate_sel0_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_GPIO],
+ PCI11X1X_RATE_SEL0_GPIO,
+ GPIO_ACTIVE_HIGH);
+
+ nodes->i2c_props[0] = PROPERTY_ENTRY_STRING("pinctrl-names", "default");
+ swnodes[SWNODE_I2C] = NODE_PROP(nodes->i2c_name, nodes->i2c_props);
+ nodes->i2c_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_I2C]);
+
+ nodes->sfp_props[0] = PROPERTY_ENTRY_STRING("compatible", "sff,sfp");
+ nodes->sfp_props[1] = PROPERTY_ENTRY_REF_ARRAY("i2c-bus",
+ nodes->i2c_ref);
+ nodes->sfp_props[2] = PROPERTY_ENTRY_REF_ARRAY("tx-fault-gpios",
+ nodes->tx_fault_ref);
+ nodes->sfp_props[3] = PROPERTY_ENTRY_REF_ARRAY("tx-disable-gpios",
+ nodes->tx_disable_ref);
+ nodes->sfp_props[4] = PROPERTY_ENTRY_REF_ARRAY("mod-def0-gpios",
+ nodes->mod_def0_ref);
+ nodes->sfp_props[5] = PROPERTY_ENTRY_REF_ARRAY("los-gpios",
+ nodes->los_ref);
+ nodes->sfp_props[6] = PROPERTY_ENTRY_REF_ARRAY("rate-select0-gpios",
+ nodes->rate_sel0_ref);
+ swnodes[SWNODE_SFP] = NODE_PROP(nodes->sfp_name, nodes->sfp_props);
+ nodes->sfp_ref[0] = SOFTWARE_NODE_REFERENCE(&swnodes[SWNODE_SFP]);
+ nodes->phylink_props[0] = PROPERTY_ENTRY_STRING("managed",
+ "in-band-status");
+ nodes->phylink_props[1] = PROPERTY_ENTRY_REF_ARRAY("sfp",
+ nodes->sfp_ref);
+ swnodes[SWNODE_PHYLINK] = NODE_PROP(nodes->phylink_name,
+ nodes->phylink_props);
+
+ nodes->group[SWNODE_GPIO] = &swnodes[SWNODE_GPIO];
+ nodes->group[SWNODE_I2C] = &swnodes[SWNODE_I2C];
+ nodes->group[SWNODE_SFP] = &swnodes[SWNODE_SFP];
+ nodes->group[SWNODE_PHYLINK] = &swnodes[SWNODE_PHYLINK];
+
+ return software_node_register_node_group(nodes->group);
+}
+
static int lan743x_netdev_close(struct net_device *netdev)
{
struct lan743x_adapter *adapter = netdev_priv(netdev);
@@ -3260,6 +3472,14 @@ static void lan743x_full_cleanup(struct lan743x_adapter *adapter)
{
unregister_netdev(adapter->netdev);
+ if (adapter->i2c_adap)
+ adapter->i2c_adap = NULL;
+
+ if (adapter->nodes)
+ software_node_unregister_node_group(adapter->nodes->group);
+
+ kfree(adapter->nodes);
+
lan743x_mdiobus_cleanup(adapter);
lan743x_hardware_cleanup(adapter);
lan743x_pci_cleanup(adapter);
@@ -3299,9 +3519,18 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
if (ret)
return ret;
- ret = lan743x_phy_init(adapter);
- if (ret)
- return ret;
+ if (adapter->is_sfp_support_en) {
+ ret = lan743x_swnodes_register(adapter);
+ if (ret) {
+ netdev_err(adapter->netdev,
+ "failed to register software nodes\n");
+ return ret;
+ }
+ } else {
+ ret = lan743x_phy_init(adapter);
+ if (ret)
+ return ret;
+ }
ret = lan743x_ptp_init(adapter);
if (ret)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 6a3a45b98140..450d8984cdb5 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -5,6 +5,7 @@
#define _LAN743X_H
#include <linux/phy.h>
+#include <linux/property.h>
#include "lan743x_ptp.h"
#define DRIVER_AUTHOR "Bryan Whitehead <Bryan.Whitehead@xxxxxxxxxxxxx>"
@@ -1008,6 +1009,39 @@ enum lan743x_sgmii_lsd {
LINK_2500_SLAVE
};
+enum lan743x_swnodes {
+ SWNODE_GPIO = 0,
+ SWNODE_I2C,
+ SWNODE_SFP,
+ SWNODE_PHYLINK,
+ SWNODE_MAX
+};
+
+#define I2C_DRV_NAME 48
+#define GPIO_DRV_NAME 32
+#define SFP_NODE_NAME 32
+#define PHYLINK_NODE_NAME 32
+
+struct lan743x_sw_nodes {
+ char gpio_name[GPIO_DRV_NAME];
+ char i2c_name[I2C_DRV_NAME];
+ char sfp_name[SFP_NODE_NAME];
+ char phylink_name[PHYLINK_NODE_NAME];
+ struct property_entry gpio_props[1];
+ struct property_entry i2c_props[1];
+ struct property_entry sfp_props[8];
+ struct property_entry phylink_props[2];
+ struct software_node_ref_args i2c_ref[1];
+ struct software_node_ref_args tx_fault_ref[1];
+ struct software_node_ref_args tx_disable_ref[1];
+ struct software_node_ref_args mod_def0_ref[1];
+ struct software_node_ref_args los_ref[1];
+ struct software_node_ref_args rate_sel0_ref[1];
+ struct software_node_ref_args sfp_ref[1];
+ struct software_node swnodes[SWNODE_MAX];
+ const struct software_node *group[SWNODE_MAX + 1];
+};
+
struct lan743x_adapter {
struct net_device *netdev;
struct mii_bus *mdiobus;
@@ -1046,6 +1080,8 @@ struct lan743x_adapter {
u32 flags;
u32 hw_cfg;
phy_interface_t phy_interface;
+ struct lan743x_sw_nodes *nodes;
+ struct i2c_adapter *i2c_adap;
};
#define LAN743X_COMPONENT_FLAG_RX(channel) BIT(20 + (channel))
--
2.34.1