Re: [PATCH 2/3] PCI: layerscape: add suspend/resume for ls1021a

[Manivannan Sadhasivam]

On Mon, Oct 16, 2023 at 04:18:36PM -0400, Frank Li wrote:
> On Mon, Oct 16, 2023 at 10:28:24PM +0530, Manivannan Sadhasivam wrote:
> > On Fri, Sep 15, 2023 at 02:43:05PM -0400, Frank Li wrote:
> > > ls1021a add suspend/resume support.
> > > 
> > 
> > Please add what the driver is doing during suspend/resume.
> > 
> > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/pci-layerscape.c | 88 ++++++++++++++++++++-
> > >  1 file changed, 87 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > > index 20c48c06e2248..bc5a8ff1a26ce 100644
> > > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > > @@ -35,6 +35,12 @@
> > >  #define PF_MCR_PTOMR		BIT(0)
> > >  #define PF_MCR_EXL2S		BIT(1)
> > >  
> > > +/* LS1021A PEXn PM Write Control Register */
> > > +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> > > +#define PMXMTTURNOFF		BIT(31)
> > > +#define SCFG_PEXSFTRSTCR	0x190
> > > +#define PEXSR(idx)		BIT(idx)
> > > +
> > >  #define PCIE_IATU_NUM		6
> > >  
> > >  struct ls_pcie_drvdata {
> > > @@ -48,6 +54,8 @@ struct ls_pcie {
> > >  	struct dw_pcie *pci;
> > >  	const struct ls_pcie_drvdata *drvdata;
> > >  	void __iomem *pf_base;
> > > +	struct regmap *scfg;
> > > +	int index;
> > >  	bool big_endian;
> > >  };
> > >  
> > > @@ -170,13 +178,91 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> > >  	return 0;
> > >  }
> > >  
> > > +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > > +{
> > > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > > +	u32 val;
> > > +
> > > +	if (!pcie->scfg) {
> > 
> > Can this ever happen?
> > 
> > > +		dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> > > +		return;
> > > +	}
> > > +
> > > +	/* Send Turn_off message */
> > 
> > "Send PME_Turn_Off message"
> > 
> > > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > > +	val |= PMXMTTURNOFF;
> > > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > > +
> > > +	/* There are not register to check ACK, so wait PCIE_PME_TO_L2_TIMEOUT_US */
> > 
> > "There is no specific register to check for PME_To_Ack from endpoint. So on the
> > safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US."
> > 
> > > +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> > > +
> > > +	/* Clear Turn_off message */
> > 
> > "PME_Turn_off". But I'm not sure if this is really required. Are you doing it
> > because the layerspace hw implements the PME_Turn_Off bit as "level triggered"?
> 
> I am not sure how hardware implement this. But reference manual said:
>  
> PMXMTTURNOFF:
> Generate PM turnoff message for power management of PCI Express controllers.
> This bit should be cleared by software.
> 0 Clear PM turnoff (default)
> 1 Trigger PM turnoff
> 

Hmm, okay. Atleast add the below comment to make it understandable in the
future:

"Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
to complete the PME_Turn_Off handshake."

- Mani

> Frank
> 
> > 
> > > +	regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> > > +	val &= ~PMXMTTURNOFF;
> > > +	regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> > > +}
> > > +
> > > +static void ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > > +{
> > > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > > +	u32 val;
> > > +
> > 
> > A comment here would be good.
> > 
> > > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > > +	val |= PEXSR(pcie->index);
> > > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > > +
> > > +	regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> > > +	val &= ~PEXSR(pcie->index);
> > > +	regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> > > +}
> > > +
> > > +static int ls1021a_pcie_host_init(struct dw_pcie_rp *pp)
> > > +{
> > > +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > > +	struct ls_pcie *pcie = to_ls_pcie(pci);
> > > +	struct device *dev = pcie->pci->dev;
> > > +	u32 index[2];
> > > +	int ret;
> > > +
> > > +	ret = ls_pcie_host_init(pp);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> > > +	if (IS_ERR(pcie->scfg)) {
> > > +		ret = PTR_ERR(pcie->scfg);
> > > +		dev_err(dev, "No syscfg phandle specified\n");
> > > +		pcie->scfg = NULL;
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> > > +	if (ret) {
> > > +		pcie->scfg = NULL;
> > > +		return ret;
> > > +	}
> > > +
> > > +	pcie->index = index[1];
> > > +
> > 
> > The above syscon parsing could be done conditionally during probe itself. There
> > is no need to do it during host_init() time.
> > 
> > - Mani
> > 
> > > +	return ret;
> > > +}
> > > +
> > >  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > >  	.host_init = ls_pcie_host_init,
> > >  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> > >  };
> > >  
> > > +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> > > +	.host_init = ls1021a_pcie_host_init,
> > > +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> > > +};
> > > +
> > >  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > > -	.pm_support = false,
> > > +	.pm_support = true,
> > > +	.ops = &ls1021a_pcie_host_ops,
> > > +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
> > >  };
> > >  
> > >  static const struct ls_pcie_drvdata layerscape_drvdata = {
> > > -- 
> > > 2.34.1
> > > 
> > 
> > -- 
> > மணிவண்ணன் சதாசிவம்

-- 
மணிவண்ணன் சதாசிவம்