Re: [PATCH] arm64: dts: qcom: sc8280xp-crd: fix eDP phy compatible

[Johan Hovold]

On Mon, Oct 16, 2023 at 11:53:02AM +0300, Dmitry Baryshkov wrote:
> On Mon, 16 Oct 2023 at 11:07, Johan Hovold <johan+linaro@xxxxxxxxxx> wrote:
> >
> > The sc8280xp Display Port PHYs can be used in either DP or eDP mode and
> > this is configured using the devicetree compatible string which defaults
> > to DP mode in the SoC dtsi.
> >
> > Override the default compatible string for the CRD eDP PHY node so that
> > the eDP settings are used.
> >
> > Fixes: 4a883a8d80b5 ("arm64: dts: qcom: sc8280xp-crd: Enable EDP")
> > Cc: stable@xxxxxxxxxxxxxxx      # 6.3
> > Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > index 772953dc428e..31a2a2d27f4e 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> > @@ -458,6 +458,8 @@ mdss0_dp3_out: endpoint {
> >  };
> >
> >  &mdss0_dp3_phy {
> > +       compatible = "qcom,sc8280xp-edp-phy";
> 
> Same question here as the one I've sent for Konrad's patch. Is it the
> same PHY type, just being repurposed for eDP or is it a different PHY
> type?

Just replied in the other thread:

	https://lore.kernel.org/lkml/ZSz7---IW_7Oj2Zr@xxxxxxxxxxxxxxxxxxxx/

Johan