Re: [PATCH v4 3/5] media: stm32-dcmipp: STM32 DCMIPP camera interface driver

From: Alain Volmat
Date: Fri Oct 06 2023 - 16:56:21 EST


Hi Dan,

thanks for the review again.

Indeed, I missed several points I could have simplified while adding the
active state code.
I will push a v5 with those modifications.

On Thu, Oct 05, 2023 at 04:11:17PM +0100, Dan Scally wrote:
> Hi Alain and Hugues - thanks for the update
>
> On 27/09/2023 13:38, Alain Volmat wrote:
> > From: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> >
> > This V4L2 subdev driver enables Digital Camera Memory Interface
> > Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series.
> >
> > Signed-off-by: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > ---
> > drivers/media/platform/st/stm32/Kconfig | 15 +
> > drivers/media/platform/st/stm32/Makefile | 1 +
> > .../platform/st/stm32/stm32-dcmipp/Makefile | 4 +
> > .../st/stm32/stm32-dcmipp/dcmipp-bytecap.c | 993 ++++++++++++++++++
> > .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 591 +++++++++++
> > .../st/stm32/stm32-dcmipp/dcmipp-common.c | 106 ++
> > .../st/stm32/stm32-dcmipp/dcmipp-common.h | 207 ++++
> > .../st/stm32/stm32-dcmipp/dcmipp-core.c | 603 +++++++++++
> > .../st/stm32/stm32-dcmipp/dcmipp-parallel.c | 461 ++++++++
> > 9 files changed, 2981 insertions(+)
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
> > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c
> >
> > diff --git a/drivers/media/platform/st/stm32/Kconfig b/drivers/media/platform/st/stm32/Kconfig
> > index b22dd4753496..fab531866941 100644
> > --- a/drivers/media/platform/st/stm32/Kconfig
> > +++ b/drivers/media/platform/st/stm32/Kconfig
> > @@ -16,6 +16,21 @@ config VIDEO_STM32_DCMI
> > To compile this driver as a module, choose M here: the module
> > will be called stm32-dcmi.
> > +config VIDEO_STM32_DCMIPP
> > + tristate "STM32 Digital Camera Memory Interface Pixel Processor (DCMIPP) support"
> > + depends on V4L_PLATFORM_DRIVERS
> > + depends on VIDEO_DEV && OF
> > + depends on MEDIA_CONTROLLER
> > + depends on ARCH_STM32 || COMPILE_TEST
> > + select VIDEOBUF2_DMA_CONTIG
> > + select V4L2_FWNODE
> > + help
> > + This module makes the STM32 Digital Camera Memory Interface
> > + Pixel Processor (DCMIPP) available as a v4l2 device.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will be called stm32-dcmipp.
> > +
> > # Mem2mem drivers
> > config VIDEO_STM32_DMA2D
> > tristate "STM32 Chrom-Art Accelerator (DMA2D)"
> > diff --git a/drivers/media/platform/st/stm32/Makefile b/drivers/media/platform/st/stm32/Makefile
> > index 896ef98a73ab..7ed8297b9b19 100644
> > --- a/drivers/media/platform/st/stm32/Makefile
> > +++ b/drivers/media/platform/st/stm32/Makefile
> > @@ -1,4 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0-only
> > obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
> > +obj-$(CONFIG_VIDEO_STM32_DCMIPP) += stm32-dcmipp/
> > stm32-dma2d-objs := dma2d/dma2d.o dma2d/dma2d-hw.o
> > obj-$(CONFIG_VIDEO_STM32_DMA2D) += stm32-dma2d.o
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile b/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
> > new file mode 100644
> > index 000000000000..8920d9388a21
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
> > @@ -0,0 +1,4 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +stm32-dcmipp-y := dcmipp-core.o dcmipp-common.o dcmipp-parallel.o dcmipp-byteproc.o dcmipp-bytecap.o
> > +
> > +obj-$(CONFIG_VIDEO_STM32_DCMIPP) += stm32-dcmipp.o
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > new file mode 100644
> > index 000000000000..dfd41fe8546c
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > @@ -0,0 +1,993 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#include <linux/iopoll.h>
> > +#include <linux/pm_runtime.h>
> > +#include <media/v4l2-ioctl.h>
> > +#include <media/v4l2-mc.h>
> > +#include <media/videobuf2-core.h>
> > +#include <media/videobuf2-dma-contig.h>
> > +
> > +#include "dcmipp-common.h"
> > +
> > +#define DCMIPP_PRSR 0x1f8
> > +#define DCMIPP_CMIER 0x3f0
> > +#define DCMIPP_CMIER_P0FRAMEIE BIT(9)
> > +#define DCMIPP_CMIER_P0VSYNCIE BIT(10)
> > +#define DCMIPP_CMIER_P0OVRIE BIT(15)
> > +#define DCMIPP_CMIER_P0ALL (DCMIPP_CMIER_P0VSYNCIE |\
> > + DCMIPP_CMIER_P0FRAMEIE |\
> > + DCMIPP_CMIER_P0OVRIE)
> > +#define DCMIPP_CMSR1 0x3f4
> > +#define DCMIPP_CMSR2 0x3f8
> > +#define DCMIPP_CMSR2_P0FRAMEF BIT(9)
> > +#define DCMIPP_CMSR2_P0VSYNCF BIT(10)
> > +#define DCMIPP_CMSR2_P0OVRF BIT(15)
> > +#define DCMIPP_CMFCR 0x3fc
> > +#define DCMIPP_P0FSCR 0x404
> > +#define DCMIPP_P0FSCR_PIPEN BIT(31)
> > +#define DCMIPP_P0FCTCR 0x500
> > +#define DCMIPP_P0FCTCR_CPTREQ BIT(3)
> > +#define DCMIPP_P0DCCNTR 0x5b0
> > +#define DCMIPP_P0DCLMTR 0x5b4
> > +#define DCMIPP_P0DCLMTR_ENABLE BIT(31)
> > +#define DCMIPP_P0DCLMTR_LIMIT_MASK GENMASK(23, 0)
> > +#define DCMIPP_P0PPM0AR1 0x5c4
> > +#define DCMIPP_P0SR 0x5f8
> > +#define DCMIPP_P0SR_CPTACT BIT(23)
> > +
> > +struct dcmipp_bytecap_pix_map {
> > + unsigned int code;
> > + u32 pixelformat;
> > +};
> > +
> > +#define PIXMAP_MBUS_PFMT(mbus, fmt) \
> > + { \
> > + .code = MEDIA_BUS_FMT_##mbus, \
> > + .pixelformat = V4L2_PIX_FMT_##fmt \
> > + }
> > +
> > +static const struct dcmipp_bytecap_pix_map dcmipp_bytecap_pix_map_list[] = {
> > + PIXMAP_MBUS_PFMT(RGB565_2X8_LE, RGB565),
> > + PIXMAP_MBUS_PFMT(YUYV8_2X8, YUYV),
> > + PIXMAP_MBUS_PFMT(YVYU8_2X8, YVYU),
> > + PIXMAP_MBUS_PFMT(UYVY8_2X8, UYVY),
> > + PIXMAP_MBUS_PFMT(VYUY8_2X8, VYUY),
> > + PIXMAP_MBUS_PFMT(Y8_1X8, GREY),
> > + PIXMAP_MBUS_PFMT(SBGGR8_1X8, SBGGR8),
> > + PIXMAP_MBUS_PFMT(SGBRG8_1X8, SGBRG8),
> > + PIXMAP_MBUS_PFMT(SGRBG8_1X8, SGRBG8),
> > + PIXMAP_MBUS_PFMT(SRGGB8_1X8, SRGGB8),
> > + PIXMAP_MBUS_PFMT(JPEG_1X8, JPEG),
> > +};
> > +
> > +static const struct dcmipp_bytecap_pix_map *
> > +dcmipp_bytecap_pix_map_by_pixelformat(u32 pixelformat)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(dcmipp_bytecap_pix_map_list); i++) {
> > + if (dcmipp_bytecap_pix_map_list[i].pixelformat == pixelformat)
> > + return &dcmipp_bytecap_pix_map_list[i];
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +struct dcmipp_buf {
> > + struct vb2_v4l2_buffer vb;
> > + bool prepared;
> > + dma_addr_t addr;
> > + size_t size;
> > + struct list_head list;
> > +};
> > +
> > +enum dcmipp_state {
> > + DCMIPP_STOPPED = 0,
> > + DCMIPP_WAIT_FOR_BUFFER,
> > + DCMIPP_RUNNING,
> > +};
> > +
> > +struct dcmipp_bytecap_device {
> > + struct dcmipp_ent_device ved;
> > + struct video_device vdev;
> > + struct device *dev;
> > + struct v4l2_pix_format format;
> > + struct vb2_queue queue;
> > + struct list_head buffers;
> > + /*
> > + * Protects concurrent calls of buf queue / irq handler
> > + * and buffer handling related variables / lists
> > + */
> > + spinlock_t irqlock;
> > + /* mutex used as vdev and queue lock */
> > + struct mutex lock;
> > + u32 sequence;
> > + struct media_pipeline pipe;
> > + struct v4l2_subdev *s_subdev;
> > +
> > + enum dcmipp_state state;
> > +
> > + /*
> > + * DCMIPP driver is handling 2 buffers
> > + * active: buffer into which DCMIPP is currently writing into
> > + * next: buffer given to the DCMIPP and which will become
> > + * automatically active on next VSYNC
> > + */
> > + struct dcmipp_buf *active, *next;
> > +
> > + void __iomem *regs;
> > +
> > + u32 cmier;
> > + u32 cmsr2;
> > +
> > + struct {
> > + u32 errors;
> > + u32 limit;
> > + u32 overrun;
> > + u32 buffers;
> > + u32 vsync;
> > + u32 frame;
> > + u32 it;
> > + u32 underrun;
> > + u32 nactive;
> > + } count;
> > +};
> > +
> > +static const struct v4l2_pix_format fmt_default = {
> > + .width = DCMIPP_FMT_WIDTH_DEFAULT,
> > + .height = DCMIPP_FMT_HEIGHT_DEFAULT,
> > + .pixelformat = V4L2_PIX_FMT_RGB565,
> > + .field = V4L2_FIELD_NONE,
> > + .colorspace = DCMIPP_COLORSPACE_DEFAULT,
> > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT,
> > + .quantization = DCMIPP_QUANTIZATION_DEFAULT,
> > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT,
> > +};
> > +
> > +static inline int dcmipp_frame_size(u32 width, u32 height, u32 format)
> > +{
> > + switch (format) {
> > + case V4L2_PIX_FMT_SBGGR8:
> > + case V4L2_PIX_FMT_SGBRG8:
> > + case V4L2_PIX_FMT_SGRBG8:
> > + case V4L2_PIX_FMT_SRGGB8:
> > + case V4L2_PIX_FMT_GREY:
> > + return width * height;
> > + case V4L2_PIX_FMT_RGB565:
> > + case V4L2_PIX_FMT_YUYV:
> > + case V4L2_PIX_FMT_YVYU:
> > + case V4L2_PIX_FMT_UYVY:
> > + case V4L2_PIX_FMT_VYUY:
> > + return width * height * 2;
> > + case V4L2_PIX_FMT_JPEG:
> > + return width * height;
> > + default:
> > + return 0;
> > + }
> > +}
> > +
> > +static inline int dcmipp_frame_stride(u32 width, u32 format)
> > +{
> > + switch (format) {
> > + case V4L2_PIX_FMT_SBGGR8:
> > + case V4L2_PIX_FMT_SGBRG8:
> > + case V4L2_PIX_FMT_SGRBG8:
> > + case V4L2_PIX_FMT_SRGGB8:
> > + case V4L2_PIX_FMT_GREY:
> > + case V4L2_PIX_FMT_JPEG:
> > + return width;
> > + case V4L2_PIX_FMT_RGB565:
> > + case V4L2_PIX_FMT_YUYV:
> > + case V4L2_PIX_FMT_YVYU:
> > + case V4L2_PIX_FMT_UYVY:
> > + case V4L2_PIX_FMT_VYUY:
> > + return width * 2;
> > + default:
> > + return 0;
> > + }
> > +}
>
>
> I'd be inclined to use v4l2_format_info()'s .bpp array for this rather than
> rolling your own but it's not a big deal either way.

Indeed, thanks. I replaced the two above functions by v4l2_fill_pixfmt
call.

>
> > +
> > +static inline int dcmipp_hdw_pixel_alignment(u32 format)
> > +{
> > + /* 16 bytes alignment required by hardware */
> > + switch (format) {
> > + case V4L2_PIX_FMT_SBGGR8:
> > + case V4L2_PIX_FMT_SGBRG8:
> > + case V4L2_PIX_FMT_SGRBG8:
> > + case V4L2_PIX_FMT_SRGGB8:
> > + case V4L2_PIX_FMT_GREY:
> > + case V4L2_PIX_FMT_JPEG:
> > + return 4; /* 2^4 = 16 pixels = 16 bytes */
> > + case V4L2_PIX_FMT_RGB565:
> > + case V4L2_PIX_FMT_YUYV:
> > + case V4L2_PIX_FMT_YVYU:
> > + case V4L2_PIX_FMT_UYVY:
> > + case V4L2_PIX_FMT_VYUY:
> > + return 3; /* 2^3 = 8 pixels = 16 bytes */
> > + default:
> > + return 0;
> > + }
> > +}
> > +
> > +static int dcmipp_bytecap_querycap(struct file *file, void *priv,
> > + struct v4l2_capability *cap)
> > +{
> > + strscpy(cap->driver, DCMIPP_PDEV_NAME, sizeof(cap->driver));
> > + strscpy(cap->card, KBUILD_MODNAME, sizeof(cap->card));
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_g_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct dcmipp_bytecap_device *vcap = video_drvdata(file);
> > +
> > + f->fmt.pix = vcap->format;
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_try_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct dcmipp_bytecap_device *vcap = video_drvdata(file);
> > + struct v4l2_pix_format *format = &f->fmt.pix;
> > + const struct dcmipp_bytecap_pix_map *vpix;
> > + u32 in_w, in_h;
> > +
> > + /* Don't accept a pixelformat that is not on the table */
> > + vpix = dcmipp_bytecap_pix_map_by_pixelformat(format->pixelformat);
> > + if (!vpix)
> > + format->pixelformat = fmt_default.pixelformat;
> > +
> > + /* Adjust width & height */
> > + in_w = format->width;
> > + in_h = format->height;
> > + v4l_bound_align_image(&format->width,
> > + DCMIPP_FRAME_MIN_WIDTH, DCMIPP_FRAME_MAX_WIDTH,
> > + dcmipp_hdw_pixel_alignment(format->pixelformat),
> > + &format->height,
> > + DCMIPP_FRAME_MIN_HEIGHT, DCMIPP_FRAME_MAX_HEIGHT,
> > + dcmipp_hdw_pixel_alignment(format->pixelformat),
> > + 0);
> > + if (format->width != in_w || format->height != in_h)
> > + dev_dbg(vcap->dev, "resolution updated: %dx%d -> %dx%d\n",
> > + in_w, in_h, format->width, format->height);
> > +
> > + format->bytesperline = dcmipp_frame_stride(format->width,
> > + format->pixelformat);
> > + format->sizeimage = dcmipp_frame_size(format->width, format->height,
> > + format->pixelformat);
> > +
> > + if (format->field == V4L2_FIELD_ANY)
> > + format->field = fmt_default.field;
> > +
> > + dcmipp_colorimetry_clamp(format);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_s_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_format *f)
> > +{
> > + struct dcmipp_bytecap_device *vcap = video_drvdata(file);
> > + int ret;
> > +
> > + /* Do not change the format while stream is on */
> > + if (vb2_is_busy(&vcap->queue))
> > + return -EBUSY;
> > +
> > + ret = dcmipp_bytecap_try_fmt_vid_cap(file, priv, f);
> > + if (ret)
> > + return ret;
> > +
> > + dev_dbg(vcap->dev, "%s: format update: old:%ux%u (0x%p4cc, %u, %u, %u, %u) new:%ux%d (0x%p4cc, %u, %u, %u, %u)\n",
> > + vcap->vdev.name,
> > + /* old */
> > + vcap->format.width, vcap->format.height,
> > + &vcap->format.pixelformat, vcap->format.colorspace,
> > + vcap->format.quantization, vcap->format.xfer_func,
> > + vcap->format.ycbcr_enc,
> > + /* new */
> > + f->fmt.pix.width, f->fmt.pix.height,
> > + &f->fmt.pix.pixelformat, f->fmt.pix.colorspace,
> > + f->fmt.pix.quantization, f->fmt.pix.xfer_func,
> > + f->fmt.pix.ycbcr_enc);
> > +
> > + vcap->format = f->fmt.pix;
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_enum_fmt_vid_cap(struct file *file, void *priv,
> > + struct v4l2_fmtdesc *f)
> > +{
> > + const struct dcmipp_bytecap_pix_map *vpix;
> > + unsigned int index = f->index;
> > + unsigned int i;
> > +
> > + if (f->mbus_code) {
> > + /*
> > + * If a media bus code is specified, only enumerate formats
> > + * compatible with it.
> > + */
> > + for (i = 0; i < ARRAY_SIZE(dcmipp_bytecap_pix_map_list); i++) {
> > + vpix = &dcmipp_bytecap_pix_map_list[i];
> > + if (vpix->code != f->mbus_code)
> > + continue;
> > +
> > + if (index == 0)
> > + break;
> > +
> > + index--;
> > + }
> > +
> > + if (i == ARRAY_SIZE(dcmipp_bytecap_pix_map_list))
> > + return -EINVAL;
> > + } else {
> > + /* Otherwise, enumerate all formatS. */
> stray capital S at the end there

Done

> > + if (f->index >= ARRAY_SIZE(dcmipp_bytecap_pix_map_list))
> > + return -EINVAL;
> > +
> > + vpix = &dcmipp_bytecap_pix_map_list[f->index];
> > + }
> > +
> > + f->pixelformat = vpix->pixelformat;
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_enum_framesizes(struct file *file, void *fh,
> > + struct v4l2_frmsizeenum *fsize)
> > +{
> > + const struct dcmipp_bytecap_pix_map *vpix;
> > +
> > + if (fsize->index)
> > + return -EINVAL;
> > +
> > + /* Only accept code in the pix map table */
> > + vpix = dcmipp_bytecap_pix_map_by_pixelformat(fsize->pixel_format);
> > + if (!vpix)
> > + return -EINVAL;
> > +
> > + fsize->type = V4L2_FRMSIZE_TYPE_CONTINUOUS;
> > + fsize->stepwise.min_width = DCMIPP_FRAME_MIN_WIDTH;
> > + fsize->stepwise.max_width = DCMIPP_FRAME_MAX_WIDTH;
> > + fsize->stepwise.min_height = DCMIPP_FRAME_MIN_HEIGHT;
> > + fsize->stepwise.max_height = DCMIPP_FRAME_MAX_HEIGHT;
> > + fsize->stepwise.step_width = 1;
> > + fsize->stepwise.step_height = 1;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_file_operations dcmipp_bytecap_fops = {
> > + .owner = THIS_MODULE,
> > + .open = v4l2_fh_open,
> > + .release = vb2_fop_release,
> > + .read = vb2_fop_read,
> > + .poll = vb2_fop_poll,
> > + .unlocked_ioctl = video_ioctl2,
> > + .mmap = vb2_fop_mmap,
> > +};
> > +
> > +static const struct v4l2_ioctl_ops dcmipp_bytecap_ioctl_ops = {
> > + .vidioc_querycap = dcmipp_bytecap_querycap,
> > +
> > + .vidioc_g_fmt_vid_cap = dcmipp_bytecap_g_fmt_vid_cap,
> > + .vidioc_s_fmt_vid_cap = dcmipp_bytecap_s_fmt_vid_cap,
> > + .vidioc_try_fmt_vid_cap = dcmipp_bytecap_try_fmt_vid_cap,
> > + .vidioc_enum_fmt_vid_cap = dcmipp_bytecap_enum_fmt_vid_cap,
> > + .vidioc_enum_framesizes = dcmipp_bytecap_enum_framesizes,
> > +
> > + .vidioc_reqbufs = vb2_ioctl_reqbufs,
> > + .vidioc_create_bufs = vb2_ioctl_create_bufs,
> > + .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> > + .vidioc_querybuf = vb2_ioctl_querybuf,
> > + .vidioc_qbuf = vb2_ioctl_qbuf,
> > + .vidioc_dqbuf = vb2_ioctl_dqbuf,
> > + .vidioc_expbuf = vb2_ioctl_expbuf,
> > + .vidioc_streamon = vb2_ioctl_streamon,
> > + .vidioc_streamoff = vb2_ioctl_streamoff,
> > +};
> > +
> > +static int dcmipp_pipeline_s_stream(struct dcmipp_bytecap_device *vcap,
> > + int state)
> > +{
> > + struct media_pad *pad;
> > + int ret;
> > +
> > + /*
> > + * Get source subdev - since link is IMMUTABLE, pointer is cached
> > + * within the dcmipp_bytecap_device structure
> > + */
> > + if (!vcap->s_subdev) {
> > + pad = media_pad_remote_pad_first(&vcap->vdev.entity.pads[0]);
> > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> > + return -EINVAL;
> > + vcap->s_subdev = media_entity_to_v4l2_subdev(pad->entity);
> > + }
> > +
> > + ret = v4l2_subdev_call(vcap->s_subdev, video, s_stream, state);
> > + if (ret < 0) {
> > + dev_err(vcap->dev, "failed to %s streaming (%d)\n",
> > + state ? "start" : "stop", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void dcmipp_start_capture(struct dcmipp_bytecap_device *vcap,
> > + struct dcmipp_buf *buf)
> > +{
> > + /* Set buffer address */
> > + reg_write(vcap, DCMIPP_P0PPM0AR1, buf->addr);
> > +
> > + /* Set buffer size */
> > + reg_write(vcap, DCMIPP_P0DCLMTR, DCMIPP_P0DCLMTR_ENABLE |
> > + ((buf->size / 4) & DCMIPP_P0DCLMTR_LIMIT_MASK));
> > +
> > + /* Capture request */
> > + reg_set(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ);
> > +}
> > +
> > +static void dcmipp_bytecap_all_buffers_done(struct dcmipp_bytecap_device *vcap,
> > + enum vb2_buffer_state state)
> > +{
> > + struct dcmipp_buf *buf, *node;
> > +
> > + list_for_each_entry_safe(buf, node, &vcap->buffers, list) {
> > + list_del_init(&buf->list);
> > + vb2_buffer_done(&buf->vb.vb2_buf, state);
> > + }
> > +}
> > +
> > +static int dcmipp_bytecap_start_streaming(struct vb2_queue *vq,
> > + unsigned int count)
> > +{
> > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq);
> > + struct media_entity *entity = &vcap->vdev.entity;
> > + struct dcmipp_buf *buf;
> > + int ret;
> > +
> > + vcap->sequence = 0;
> > + memset(&vcap->count, 0, sizeof(vcap->count));
> > +
> > + ret = pm_runtime_resume_and_get(vcap->dev);
> > + if (ret < 0) {
> > + dev_err(vcap->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
> > + __func__, ret);
> > + goto err_buffer_done;
> > + }
> > +
> > + /* Start the media pipeline */
> > + ret = media_pipeline_start(entity->pads, &vcap->pipe);
> > + if (ret) {
> > + dev_dbg(vcap->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n",
> > + __func__, ret);
> > + goto err_pm_put;
> > + }
> > +
> > + /* Start all the elements within pipeline */
> > + ret = dcmipp_pipeline_s_stream(vcap, 1);
> > + if (ret)
> > + goto err_media_pipeline_stop;
> > +
> > + spin_lock_irq(&vcap->irqlock);
> > +
> > + /* Enable pipe at the end of programming */
> > + reg_set(vcap, DCMIPP_P0FSCR, DCMIPP_P0FSCR_PIPEN);
> > +
> > + /*
> > + * Start capture if at least one buffer has been queued,
> > + * otherwise start is deferred until the next buffer is queued
> > + */
> > + buf = list_first_entry_or_null(&vcap->buffers, typeof(*buf), list);
> > + if (!buf) {
> > + dev_dbg(vcap->dev, "Start streaming is deferred to next buffer queueing\n");
> > + vcap->next = NULL;
> > + vcap->state = DCMIPP_WAIT_FOR_BUFFER;
> > + spin_unlock_irq(&vcap->irqlock);
> > + return 0;
> > + }
>
>
> The vb2 core ought to handle this for you; if you've set min_buffers_needed
> then vb2_start_streaming() shouldn't be called until the required number of
> buffers have been queued.

Agreed

>
> > + vcap->next = buf;
> > + dev_dbg(vcap->dev, "Start with next [%d] %p phy=%pad\n",
> > + buf->vb.vb2_buf.index, buf, &buf->addr);
> > +
> > + /* Start capture */
> > + dcmipp_start_capture(vcap, buf);
>
>
> This comment and a couple of the other ones above are a bit superfluous.

Done

>
> > +
> > + /* Enable interruptions */
> > + vcap->cmier |= DCMIPP_CMIER_P0ALL;
> > + reg_set(vcap, DCMIPP_CMIER, vcap->cmier);
> > +
> > + vcap->state = DCMIPP_RUNNING;
> > +
> > + spin_unlock_irq(&vcap->irqlock);
> > +
> > + return 0;
> > +
> > +err_media_pipeline_stop:
> > + media_pipeline_stop(entity->pads);
> > +err_pm_put:
> > + pm_runtime_put(vcap->dev);
> > +err_buffer_done:
> > + spin_lock_irq(&vcap->irqlock);
> > + /*
> > + * Return all buffers to vb2 in QUEUED state.
> > + * This will give ownership back to userspace
> > + */
> > + dcmipp_bytecap_all_buffers_done(vcap, VB2_BUF_STATE_QUEUED);
> > + vcap->active = NULL;
> > + spin_unlock_irq(&vcap->irqlock);
> > +
> > + return ret;
> > +}
> > +
> > +static void dcmipp_dump_status(struct dcmipp_bytecap_device *vcap)
> > +{
> > + struct device *dev = vcap->dev;
> > +
> > + dev_dbg(dev, "[DCMIPP_PRSR] =%#10.8x\n", reg_read(vcap, DCMIPP_PRSR));
> > + dev_dbg(dev, "[DCMIPP_P0SR] =%#10.8x\n", reg_read(vcap, DCMIPP_P0SR));
> > + dev_dbg(dev, "[DCMIPP_P0DCCNTR]=%#10.8x\n",
> > + reg_read(vcap, DCMIPP_P0DCCNTR));
> > + dev_dbg(dev, "[DCMIPP_CMSR1] =%#10.8x\n", reg_read(vcap, DCMIPP_CMSR1));
> > + dev_dbg(dev, "[DCMIPP_CMSR2] =%#10.8x\n", reg_read(vcap, DCMIPP_CMSR2));
> > +}
> > +
> > +/*
> > + * Stop the stream engine. Any remaining buffers in the stream queue are
> > + * dequeued and passed on to the vb2 framework marked as STATE_ERROR.
> > + */
> > +static void dcmipp_bytecap_stop_streaming(struct vb2_queue *vq)
> > +{
> > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq);
> > + int ret;
> > + u32 status;
> > +
> > + dcmipp_pipeline_s_stream(vcap, 0);
> > +
> > + /* Stop the media pipeline */
> > + media_pipeline_stop(vcap->vdev.entity.pads);
> > +
> > + /* Disable interruptions */
> > + reg_clear(vcap, DCMIPP_CMIER, vcap->cmier);
> > +
> > + /* Stop capture */
> > + reg_clear(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ);
> > +
> > + /* Wait until CPTACT become 0 */
> > + ret = readl_relaxed_poll_timeout(vcap->regs + DCMIPP_P0SR, status,
> > + !(status & DCMIPP_P0SR_CPTACT),
> > + 20 * USEC_PER_MSEC,
> > + 1000 * USEC_PER_MSEC);
> > + if (ret)
> > + dev_warn(vcap->dev, "Timeout when stopping\n");
> > +
> > + /* Disable pipe */
> > + reg_clear(vcap, DCMIPP_P0FSCR, DCMIPP_P0FSCR_PIPEN);
> > +
> > + spin_lock_irq(&vcap->irqlock);
> > +
> > + /* Return all queued buffers to vb2 in ERROR state */
> > + dcmipp_bytecap_all_buffers_done(vcap, VB2_BUF_STATE_ERROR);
> > + INIT_LIST_HEAD(&vcap->buffers);
> > +
> > + vcap->active = NULL;
>
>
> Does vcap->active not need a vb2_buffer_done() call too?

Not here. Actually active is pointing to a buffer but this buffer is
still kept within the list hence above function would already call the
vb2_buffer_done.

>
> > + vcap->state = DCMIPP_STOPPED;
> > +
> > + spin_unlock_irq(&vcap->irqlock);
> > +
> > + dcmipp_dump_status(vcap);
> > +
> > + pm_runtime_put(vcap->dev);
> > +
> > + if (vcap->count.errors)
> > + dev_warn(vcap->dev, "Some errors found while streaming: errors=%d (overrun=%d, limit=%d, nactive=%d), underrun=%d, buffers=%d\n",
> > + vcap->count.errors, vcap->count.overrun,
> > + vcap->count.limit, vcap->count.nactive,
> > + vcap->count.underrun, vcap->count.buffers);
> > +}
> > +
> > +static int dcmipp_bytecap_buf_prepare(struct vb2_buffer *vb)
> > +{
> > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vb->vb2_queue);
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb);
> > + unsigned long size;
> > +
> > + size = vcap->format.sizeimage;
> > +
> > + if (vb2_plane_size(vb, 0) < size) {
> > + dev_err(vcap->dev, "%s data will not fit into plane (%lu < %lu)\n",
> > + __func__, vb2_plane_size(vb, 0), size);
> > + return -EINVAL;
> > + }
> > +
> > + vb2_set_plane_payload(vb, 0, size);
> > +
> > + if (!buf->prepared) {
> > + /* Get memory addresses */
> > + buf->addr = vb2_dma_contig_plane_dma_addr(&buf->vb.vb2_buf, 0);
> > + buf->size = vb2_plane_size(&buf->vb.vb2_buf, 0);
> > + buf->prepared = true;
> > +
> > + vb2_set_plane_payload(&buf->vb.vb2_buf, 0, buf->size);
> > +
> > + dev_dbg(vcap->dev, "Setup [%d] phy=%pad size=%zu\n",
> > + vb->index, &buf->addr, buf->size);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void dcmipp_bytecap_buf_queue(struct vb2_buffer *vb2_buf)
> > +{
> > + struct dcmipp_bytecap_device *vcap =
> > + vb2_get_drv_priv(vb2_buf->vb2_queue);
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb2_buf);
> > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb);
> > +
> > + dev_dbg(vcap->dev, "Queue [%d] %p phy=%pad\n", buf->vb.vb2_buf.index,
> > + buf, &buf->addr);
> > +
> > + spin_lock_irq(&vcap->irqlock);
> > + list_add_tail(&buf->list, &vcap->buffers);
> > +
> > + if (vcap->state == DCMIPP_WAIT_FOR_BUFFER) {
> > + vcap->next = buf;
> > + dev_dbg(vcap->dev, "Restart with next [%d] %p phy=%pad\n",
> > + buf->vb.vb2_buf.index, buf, &buf->addr);
> > +
> > + dcmipp_start_capture(vcap, buf);
> > +
> > + vcap->state = DCMIPP_RUNNING;
> > + }
>
>
> Again the vb2 core ought to handle this wait for you.

Hum, I might have missed something in the vb2 core but I didn't spot
this part. This piece of code is here to "restart" capturing after the
pipe went to buffer starvation. Basically, if we notice within the
interrupt handler that we do not have any buffer to give to the DCMIPP,
then we stop capturing and wait for a new buffer to get queued by the
application.

>
> > +
> > + spin_unlock_irq(&vcap->irqlock);
> > +}
> > +
> > +static int dcmipp_bytecap_queue_setup(struct vb2_queue *vq,
> > + unsigned int *nbuffers,
> > + unsigned int *nplanes,
> > + unsigned int sizes[],
> > + struct device *alloc_devs[])
> > +{
> > + struct dcmipp_bytecap_device *vcap = vb2_get_drv_priv(vq);
> > + unsigned int size;
> > +
> > + size = vcap->format.sizeimage;
> > +
> > + /* Make sure the image size is large enough */
> > + if (*nplanes)
> > + return sizes[0] < vcap->format.sizeimage ? -EINVAL : 0;
> > +
> > + *nplanes = 1;
> > + sizes[0] = vcap->format.sizeimage;
> > +
> > + dev_dbg(vcap->dev, "Setup queue, count=%d, size=%d\n",
> > + *nbuffers, size);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_bytecap_buf_init(struct vb2_buffer *vb)
> > +{
> > + struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> > + struct dcmipp_buf *buf = container_of(vbuf, struct dcmipp_buf, vb);
> > +
> > + INIT_LIST_HEAD(&buf->list);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct vb2_ops dcmipp_bytecap_qops = {
> > + .start_streaming = dcmipp_bytecap_start_streaming,
> > + .stop_streaming = dcmipp_bytecap_stop_streaming,
> > + .buf_init = dcmipp_bytecap_buf_init,
> > + .buf_prepare = dcmipp_bytecap_buf_prepare,
> > + .buf_queue = dcmipp_bytecap_buf_queue,
> > + .queue_setup = dcmipp_bytecap_queue_setup,
> > + /*
> > + * Since q->lock is set we can use the standard
> > + * vb2_ops_wait_prepare/finish helper functions.
> > + */
> > + .wait_prepare = vb2_ops_wait_prepare,
> > + .wait_finish = vb2_ops_wait_finish,
> > +};
> > +
> > +static void dcmipp_bytecap_release(struct video_device *vdev)
> > +{
> > + struct dcmipp_bytecap_device *vcap =
> > + container_of(vdev, struct dcmipp_bytecap_device, vdev);
> > +
> > + dcmipp_pads_cleanup(vcap->ved.pads);
> > + mutex_destroy(&vcap->lock);
> > +
> > + kfree(vcap);
> > +}
> > +
> > +void dcmipp_bytecap_ent_release(struct dcmipp_ent_device *ved)
> > +{
> > + struct dcmipp_bytecap_device *vcap =
> > + container_of(ved, struct dcmipp_bytecap_device, ved);
> > +
> > + media_entity_cleanup(ved->ent);
> > + vb2_video_unregister_device(&vcap->vdev);
> > +}
> > +
> > +static void dcmipp_buffer_done(struct dcmipp_bytecap_device *vcap,
> > + struct dcmipp_buf *buf,
> > + size_t bytesused,
> > + int err)
> > +{
> > + struct vb2_v4l2_buffer *vbuf;
> > +
> > + list_del_init(&buf->list);
> > +
> > + vbuf = &buf->vb;
> > +
> > + vbuf->sequence = vcap->sequence++;
> > + vbuf->field = V4L2_FIELD_NONE;
> > + vbuf->vb2_buf.timestamp = ktime_get_ns();
> > + vb2_set_plane_payload(&vbuf->vb2_buf, 0, bytesused);
> > + vb2_buffer_done(&vbuf->vb2_buf,
> > + err ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> > + dev_dbg(vcap->dev, "Done [%d] %p phy=%pad\n", buf->vb.vb2_buf.index,
> > + buf, &buf->addr);
> > + vcap->count.buffers++;
> > +}
> > +
> > +/* irqlock must be held */
> > +static void
> > +dcmipp_bytecap_set_next_frame_or_stop(struct dcmipp_bytecap_device *vcap)
> > +{
> > + if (!vcap->next && list_is_singular(&vcap->buffers)) {
> > + /*
> > + * If there is no available buffer (none or a single one in the
> > + * list while two are expected), stop the capture (effective
> > + * for next frame). On-going frame capture will continue until
> > + * FRAME END but no further capture will be done.
> > + */
> > + reg_clear(vcap, DCMIPP_P0FCTCR, DCMIPP_P0FCTCR_CPTREQ);
> > +
> > + dev_dbg(vcap->dev, "Capture restart is deferred to next buffer queueing\n");
> > + vcap->next = NULL;
> > + vcap->state = DCMIPP_WAIT_FOR_BUFFER;
> > + return;
> > + }
> > +
> > + /* If we don't have buffer yet, pick the one after active */
> > + if (!vcap->next)
> > + vcap->next = list_next_entry(vcap->active, list);
> > +
> > + /*
> > + * Set buffer address
> > + * This register is shadowed and will be taken into
> > + * account on next VSYNC (start of next frame)
> > + */
> > + reg_write(vcap, DCMIPP_P0PPM0AR1, vcap->next->addr);
> > + dev_dbg(vcap->dev, "Write [%d] %p phy=%pad\n",
> > + vcap->next->vb.vb2_buf.index, vcap->next, &vcap->next->addr);
> > +}
> > +
> > +/* irqlock must be held */
> > +static void dcmipp_bytecap_process_frame(struct dcmipp_bytecap_device *vcap,
> > + size_t bytesused)
> > +{
> > + int err = 0;
> > + struct dcmipp_buf *buf = vcap->active;
> > +
> > + if (!buf) {
> > + vcap->count.nactive++;
> > + vcap->count.errors++;
> > + return;
> > + }
> > +
> > + if (bytesused > buf->size) {
> > + dev_dbg(vcap->dev, "frame larger than expected (%zu > %zu)\n",
> > + bytesused, buf->size);
> > + /* Clip to buffer size and return buffer to V4L2 in error */
> > + bytesused = buf->size;
> > + vcap->count.limit++;
> > + vcap->count.errors++;
> > + err = -EOVERFLOW;
> > + }
> > +
> > + dcmipp_buffer_done(vcap, buf, bytesused, err);
> > + vcap->active = NULL;
> > +}
> > +
> > +static irqreturn_t dcmipp_bytecap_irq_thread(int irq, void *arg)
> > +{
> > + struct dcmipp_bytecap_device *vcap =
> > + container_of(arg, struct dcmipp_bytecap_device, ved);
> > + size_t bytesused = 0;
> > + u32 cmsr2;
> > +
> > + spin_lock_irq(&vcap->irqlock);
> > +
> > + cmsr2 = vcap->cmsr2 & vcap->cmier;
> > +
> > + /*
> > + * If we have an overrun, a frame-end will probably not be generated,
> > + * in that case the active buffer will be recycled as next buffer by
> > + * the VSYNC handler
> > + */
> > + if (cmsr2 & DCMIPP_CMSR2_P0OVRF) {
> > + vcap->count.errors++;
> > + vcap->count.overrun++;
> > + }
> > +
> > + if (cmsr2 & DCMIPP_CMSR2_P0FRAMEF) {
> > + vcap->count.frame++;
> > +
> > + /* Read captured buffer size */
> > + bytesused = reg_read(vcap, DCMIPP_P0DCCNTR);
> > + dcmipp_bytecap_process_frame(vcap, bytesused);
> > + }
> > +
> > + if (cmsr2 & DCMIPP_CMSR2_P0VSYNCF) {
> > + vcap->count.vsync++;
> > + if (vcap->state == DCMIPP_WAIT_FOR_BUFFER) {
> > + vcap->count.underrun++;
> > + goto out;
> > + }
> > +
> > + /*
> > + * On VSYNC, the previously set next buffer is going to become
> > + * active thanks to the shadowing mechanism of the DCMIPP. In
> > + * most of the cases, since a FRAMEEND has already come,
> > + * pointer next is NULL since active is reset during the
> > + * FRAMEEND handling. However, in case of framerate adjustment,
> > + * there are more VSYNC than FRAMEEND. Thus we recycle the
> > + * active (but not used) buffer and put it back into next.
> > + */
> > + swap(vcap->active, vcap->next);
> > + dcmipp_bytecap_set_next_frame_or_stop(vcap);
> > + }
> > +
> > +out:
> > + spin_unlock_irq(&vcap->irqlock);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t dcmipp_bytecap_irq_callback(int irq, void *arg)
> > +{
> > + struct dcmipp_bytecap_device *vcap =
> > + container_of(arg, struct dcmipp_bytecap_device, ved);
> > +
> > + /* Store interrupt status register */
> > + vcap->cmsr2 = reg_read(vcap, DCMIPP_CMSR2) & vcap->cmier;
> > + vcap->count.it++;
> > +
> > + /* Clear interrupt */
> > + reg_write(vcap, DCMIPP_CMFCR, vcap->cmsr2);
> > +
> > + return IRQ_WAKE_THREAD;
> > +}
> > +
> > +struct dcmipp_ent_device *dcmipp_bytecap_ent_init(struct device *dev,
> > + const char *entity_name,
> > + struct v4l2_device *v4l2_dev,
> > + void __iomem *regs)
> > +{
> > + struct dcmipp_bytecap_device *vcap;
> > + struct v4l2_pix_format *format;
> > + struct video_device *vdev;
> > + struct vb2_queue *q;
> > + int ret = 0;
> > +
> > + /* Allocate the dcmipp_bytecap_device struct */
> > + vcap = kzalloc(sizeof(*vcap), GFP_KERNEL);
> > + if (!vcap)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Allocate the pads */
> > + vcap->ved.pads =
> > + dcmipp_pads_init(1,
> > + (const unsigned long[1]) {MEDIA_PAD_FL_SINK});
> > + if (IS_ERR(vcap->ved.pads)) {
> > + ret = PTR_ERR(vcap->ved.pads);
> > + goto err_free_vcap;
> > + }
> > +
> > + /* Initialize the media entity */
> > + vcap->vdev.entity.name = entity_name;
> > + vcap->vdev.entity.function = MEDIA_ENT_F_IO_V4L;
> > + ret = media_entity_pads_init(&vcap->vdev.entity, 1, vcap->ved.pads);
> > + if (ret)
> > + goto err_clean_pads;
> > +
> > + /* Initialize the lock */
> > + mutex_init(&vcap->lock);
> > +
> > + /* Initialize the vb2 queue */
> > + q = &vcap->queue;
> > + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
> > + q->io_modes = VB2_MMAP | VB2_DMABUF;
> > + q->lock = &vcap->lock;
> > + q->drv_priv = vcap;
> > + q->buf_struct_size = sizeof(struct dcmipp_buf);
> > + q->ops = &dcmipp_bytecap_qops;
> > + q->mem_ops = &vb2_dma_contig_memops;
> > + q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> > + q->min_buffers_needed = 1;
> > + q->dev = dev;
> > +
> > + /* DCMIPP requires 16 bytes aligned buffers */
> > + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32) & ~0x0f);
> > + if (ret) {
> > + dev_err(dev, "Failed to set DMA mask\n");
> > + goto err_clean_pads;
> > + }
> > +
> > + ret = vb2_queue_init(q);
> > + if (ret) {
> > + dev_err(dev, "%s: vb2 queue init failed (err=%d)\n",
> > + entity_name, ret);
> > + goto err_clean_m_ent;
> > + }
> > +
> > + /* Initialize buffer list and its lock */
> > + INIT_LIST_HEAD(&vcap->buffers);
> > + spin_lock_init(&vcap->irqlock);
> > +
> > + /* Set default frame format */
> > + vcap->format = fmt_default;
> > + format = &vcap->format;
> > + format->bytesperline = dcmipp_frame_stride(format->width,
> > + format->pixelformat);
> > + format->sizeimage = dcmipp_frame_size(format->width, format->height,
> > + format->pixelformat);
> > +
> > + /* Fill the dcmipp_ent_device struct */
> > + vcap->ved.ent = &vcap->vdev.entity;
> > + vcap->ved.handler = dcmipp_bytecap_irq_callback;
> > + vcap->ved.thread_fn = dcmipp_bytecap_irq_thread;
> > + vcap->dev = dev;
> > + vcap->regs = regs;
> > +
> > + /* Initialize the video_device struct */
> > + vdev = &vcap->vdev;
> > + vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
> > + V4L2_CAP_IO_MC;
> > + vdev->release = dcmipp_bytecap_release;
> > + vdev->fops = &dcmipp_bytecap_fops;
> > + vdev->ioctl_ops = &dcmipp_bytecap_ioctl_ops;
> > + vdev->lock = &vcap->lock;
> > + vdev->queue = q;
> > + vdev->v4l2_dev = v4l2_dev;
> > + strscpy(vdev->name, entity_name, sizeof(vdev->name));
> > + video_set_drvdata(vdev, &vcap->ved);
> > +
> > + /* Register the video_device with the v4l2 and the media framework */
> > + ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> > + if (ret) {
> > + dev_err(dev, "%s: video register failed (err=%d)\n",
> > + vcap->vdev.name, ret);
> > + goto err_clean_m_ent;
> > + }
> > +
> > + return &vcap->ved;
> > +
> > +err_clean_m_ent:
> > + media_entity_cleanup(&vcap->vdev.entity);
> > +err_clean_pads:
> > + dcmipp_pads_cleanup(vcap->ved.pads);
> > +err_free_vcap:
> > + kfree(vcap);
> > +
> > + return ERR_PTR(ret);
> > +}
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
> > new file mode 100644
> > index 000000000000..897869cc8be0
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
> > @@ -0,0 +1,591 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#include <linux/vmalloc.h>
> > +#include <linux/v4l2-mediabus.h>
> > +#include <media/v4l2-rect.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#include "dcmipp-common.h"
> > +
> > +#define DCMIPP_P0FCTCR 0x500
> > +#define DCMIPP_P0FCTCR_FRATE_MASK GENMASK(1, 0)
> > +#define DCMIPP_P0SCSTR 0x504
> > +#define DCMIPP_P0SCSTR_HSTART_SHIFT 0
> > +#define DCMIPP_P0SCSTR_VSTART_SHIFT 16
> > +#define DCMIPP_P0SCSZR 0x508
> > +#define DCMIPP_P0SCSZR_ENABLE BIT(31)
> > +#define DCMIPP_P0SCSZR_HSIZE_SHIFT 0
> > +#define DCMIPP_P0SCSZR_VSIZE_SHIFT 16
> > +#define DCMIPP_P0PPCR 0x5c0
> > +#define DCMIPP_P0PPCR_BSM_1_2 0x1
> > +#define DCMIPP_P0PPCR_BSM_1_4 0x2
> > +#define DCMIPP_P0PPCR_BSM_2_4 0x3
> > +#define DCMIPP_P0PPCR_BSM_MASK GENMASK(8, 7)
> > +#define DCMIPP_P0PPCR_BSM_SHIFT 0x7
> > +#define DCMIPP_P0PPCR_LSM BIT(10)
> > +#define DCMIPP_P0PPCR_OELS BIT(11)
> > +
> > +#define IS_SINK(pad) (!(pad))
> > +#define IS_SRC(pad) ((pad))
> > +
> > +struct dcmipp_byteproc_pix_map {
> > + unsigned int code;
> > + unsigned int bpp;
> > +};
> > +
> > +#define PIXMAP_MBUS_BPP(mbus, byteperpixel) \
> > + { \
> > + .code = MEDIA_BUS_FMT_##mbus, \
> > + .bpp = byteperpixel, \
> > + }
> > +static const struct dcmipp_byteproc_pix_map dcmipp_byteproc_pix_map_list[] = {
> > + PIXMAP_MBUS_BPP(RGB565_2X8_LE, 2),
> > + PIXMAP_MBUS_BPP(YUYV8_2X8, 2),
> > + PIXMAP_MBUS_BPP(YVYU8_2X8, 2),
> > + PIXMAP_MBUS_BPP(UYVY8_2X8, 2),
> > + PIXMAP_MBUS_BPP(VYUY8_2X8, 2),
> > + PIXMAP_MBUS_BPP(Y8_1X8, 1),
> > + PIXMAP_MBUS_BPP(SBGGR8_1X8, 1),
> > + PIXMAP_MBUS_BPP(SGBRG8_1X8, 1),
> > + PIXMAP_MBUS_BPP(SGRBG8_1X8, 1),
> > + PIXMAP_MBUS_BPP(SRGGB8_1X8, 1),
> > + PIXMAP_MBUS_BPP(JPEG_1X8, 1),
> > +};
> > +
> > +static const struct dcmipp_byteproc_pix_map *
> > +dcmipp_byteproc_pix_map_by_code(u32 code)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(dcmipp_byteproc_pix_map_list); i++) {
> > + if (dcmipp_byteproc_pix_map_list[i].code == code)
> > + return &dcmipp_byteproc_pix_map_list[i];
> > + }
> > +
> > + return NULL;
> > +}
> > +
> > +struct dcmipp_byteproc_device {
> > + struct dcmipp_ent_device ved;
> > + struct v4l2_subdev sd;
> > + struct device *dev;
> > + void __iomem *regs;
> > + bool streaming;
> > +};
> > +
> > +static const struct v4l2_mbus_framefmt fmt_default = {
> > + .width = DCMIPP_FMT_WIDTH_DEFAULT,
> > + .height = DCMIPP_FMT_HEIGHT_DEFAULT,
> > + .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
> > + .field = V4L2_FIELD_NONE,
> > + .colorspace = DCMIPP_COLORSPACE_DEFAULT,
> > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT,
> > + .quantization = DCMIPP_QUANTIZATION_DEFAULT,
> > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT,
> > +};
> > +
> > +static const struct v4l2_rect crop_min = {
> > + .width = DCMIPP_FRAME_MIN_WIDTH,
> > + .height = DCMIPP_FRAME_MIN_HEIGHT,
> > + .top = 0,
> > + .left = 0,
> > +};
> > +
> > +static void dcmipp_byteproc_adjust_crop(struct v4l2_rect *r,
> > + struct v4l2_rect *compose)
> > +{
> > + /* Disallow rectangles smaller than the minimal one. */
> > + v4l2_rect_set_min_size(r, &crop_min);
> > + v4l2_rect_map_inside(r, compose);
> > +}
> > +
> > +static void dcmipp_byteproc_adjust_compose(struct v4l2_rect *r,
> > + const struct v4l2_mbus_framefmt *fmt)
> > +{
> > + r->top = 0;
> > + r->left = 0;
> > +
> > + /* Compose is not possible for JPEG or Bayer formats */
> > + if (fmt->code == MEDIA_BUS_FMT_JPEG_1X8 ||
> > + fmt->code == MEDIA_BUS_FMT_SBGGR8_1X8 ||
> > + fmt->code == MEDIA_BUS_FMT_SGBRG8_1X8 ||
> > + fmt->code == MEDIA_BUS_FMT_SGRBG8_1X8 ||
> > + fmt->code == MEDIA_BUS_FMT_SRGGB8_1X8) {
> > + r->width = fmt->width;
> > + r->height = fmt->height;
> > + return;
> > + }
> > +
> > + /* Adjust height - we can only perform 1/2 decimation */
> > + if (r->height <= (fmt->height / 2))
> > + r->height = fmt->height / 2;
> > + else
> > + r->height = fmt->height;
> > +
> > + /* Adjust width /2 or /4 for 8bits formats and /2 for 16bits formats */
> > + if (fmt->code == MEDIA_BUS_FMT_Y8_1X8 && r->width <= (fmt->width / 4))
> > + r->width = fmt->width / 4;
> > + else if (r->width <= (fmt->width / 2))
> > + r->width = fmt->width / 2;
> > + else
> > + r->width = fmt->width;
> > +}
> > +
> > +static void dcmipp_byteproc_adjust_fmt(struct v4l2_mbus_framefmt *fmt)
> > +{
> > + const struct dcmipp_byteproc_pix_map *vpix;
> > +
> > + /* Only accept code in the pix map table */
> > + vpix = dcmipp_byteproc_pix_map_by_code(fmt->code);
> > + if (!vpix)
> > + fmt->code = fmt_default.code;
> > +
> > + fmt->width = clamp_t(u32, fmt->width, DCMIPP_FRAME_MIN_WIDTH,
> > + DCMIPP_FRAME_MAX_WIDTH) & ~1;
> > + fmt->height = clamp_t(u32, fmt->height, DCMIPP_FRAME_MIN_HEIGHT,
> > + DCMIPP_FRAME_MAX_HEIGHT) & ~1;
> > +
> > + if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE)
> > + fmt->field = fmt_default.field;
> > +
> > + dcmipp_colorimetry_clamp(fmt);
> > +}
> > +
> > +static int dcmipp_byteproc_init_cfg(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < sd->entity.num_pads; i++) {
> > + struct v4l2_mbus_framefmt *mf;
> > + struct v4l2_rect *r;
> > +
> > + mf = v4l2_subdev_get_try_format(sd, sd_state, i);
> > + *mf = fmt_default;
> > +
> > + if (IS_SINK(i))
> > + r = v4l2_subdev_get_try_compose(sd, sd_state, i);
> > + else
> > + r = v4l2_subdev_get_try_crop(sd, sd_state, i);
> > +
> > + r->top = 0;
> > + r->left = 0;
> > + r->width = DCMIPP_FMT_WIDTH_DEFAULT;
> > + r->height = DCMIPP_FMT_HEIGHT_DEFAULT;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +dcmipp_byteproc_enum_mbus_code(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + const struct dcmipp_byteproc_pix_map *vpix;
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > +
> > + if (IS_SINK(code->pad)) {
> > + if (code->index >= ARRAY_SIZE(dcmipp_byteproc_pix_map_list))
> > + return -EINVAL;
> > + vpix = &dcmipp_byteproc_pix_map_list[code->index];
> > + code->code = vpix->code;
> > + } else {
> > + /* byteproc doesn't support transformation on format */
> > + if (code->index > 0)
> > + return -EINVAL;
> > +
> > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > + code->code = sink_fmt->code;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +dcmipp_byteproc_enum_frame_size(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > + struct v4l2_rect *compose;
> > +
> > + if (fse->index)
> > + return -EINVAL;
> > +
> > + fse->min_width = DCMIPP_FRAME_MIN_WIDTH;
> > + fse->min_height = DCMIPP_FRAME_MIN_HEIGHT;
> > +
> > + if (IS_SINK(fse->pad)) {
> > + fse->max_width = DCMIPP_FRAME_MAX_WIDTH;
> > + fse->max_height = DCMIPP_FRAME_MAX_HEIGHT;
> > + } else {
> > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0);
> > + fse->max_width = compose->width;
> > + fse->max_height = compose->height;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_byteproc_get_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct v4l2_rect *crop_rect;
> > +
> > + fmt->format = *v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > + crop_rect = v4l2_subdev_get_pad_crop(sd, sd_state, 1);
> > +
> > + if (IS_SRC(fmt->pad)) {
> > + fmt->format.width = crop_rect->width;
> > + fmt->format.height = crop_rect->height;
> > + }
>
>
> Is this necessary since you're setting the format.width to account for the
> crop in the s_fmt() callback below? I think you could probably drop this
> whole function and use v4l2_subdev_get_fmt()

Yes, agreed.

>
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_byteproc_set_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd);
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_rect *crop, *compose;
> > +
> > + if (byteproc->streaming)
> > + return -EBUSY;
> > +
> > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1);
> > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0);
> > +
> > + if (IS_SRC(fmt->pad)) {
> > + fmt->format = *sink_fmt;
> > + fmt->format.width = crop->width;
> > + fmt->format.height = crop->height;
> > + } else {
> > + dcmipp_byteproc_adjust_fmt(&fmt->format);
> > + crop->top = 0;
> > + crop->left = 0;
> > + crop->width = fmt->format.width;
> > + crop->height = fmt->format.height;
> > + *compose = *crop;
> > + *sink_fmt = fmt->format;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_byteproc_get_selection(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_selection *s)
> > +{
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_rect *crop, *compose;
> > +
> > + /*
> > + * In the HW, the decimation block is located prior to the crop hence:
> > + * Compose is done on the sink pad
> > + * Crop is done on the src pad
> > + */
> > + if (IS_SINK(s->pad) &&
> > + (s->target == V4L2_SEL_TGT_CROP ||
> > + s->target == V4L2_SEL_TGT_CROP_BOUNDS ||
> > + s->target == V4L2_SEL_TGT_CROP_DEFAULT))
> > + return -EINVAL;
> > +
> > + if (IS_SRC(s->pad) &&
> > + (s->target == V4L2_SEL_TGT_COMPOSE ||
> > + s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS ||
> > + s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT))
> > + return -EINVAL;
> > +
> > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1);
> > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0);
> > +
> > + switch (s->target) {
> > + case V4L2_SEL_TGT_CROP:
> > + s->r = *crop;
> > + break;
> > + case V4L2_SEL_TGT_CROP_BOUNDS:
> > + case V4L2_SEL_TGT_CROP_DEFAULT:
> > + s->r = *compose;
> > + break;
> > + case V4L2_SEL_TGT_COMPOSE:
> > + s->r = *compose;
> > + break;
> > + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> > + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> > + s->r.top = 0;
> > + s->r.left = 0;
> > + s->r.width = sink_fmt->width;
> > + s->r.height = sink_fmt->height;
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_byteproc_set_selection(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_selection *s)
> > +{
> > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd);
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_rect *crop, *compose;
> > +
> > + /*
> > + * In the HW, the decimation block is located prior to the crop hence:
> > + * Compose is done on the sink pad
> > + * Crop is done on the src pad
> > + */
> > + if ((s->target == V4L2_SEL_TGT_CROP ||
> > + s->target == V4L2_SEL_TGT_CROP_BOUNDS ||
> > + s->target == V4L2_SEL_TGT_CROP_DEFAULT) && IS_SINK(s->pad))
> > + return -EINVAL;
> > +
> > + if ((s->target == V4L2_SEL_TGT_COMPOSE ||
> > + s->target == V4L2_SEL_TGT_COMPOSE_BOUNDS ||
> > + s->target == V4L2_SEL_TGT_COMPOSE_DEFAULT) && IS_SRC(s->pad))
> > + return -EINVAL;
> > +
> > + sink_fmt = v4l2_subdev_get_pad_format(sd, sd_state, 0);
> > + crop = v4l2_subdev_get_pad_crop(sd, sd_state, 1);
> > + compose = v4l2_subdev_get_pad_compose(sd, sd_state, 0);
> > +
> > + switch (s->target) {
> > + case V4L2_SEL_TGT_CROP:
> > + dcmipp_byteproc_adjust_crop(&s->r, compose);
> > +
> > + *crop = s->r;
> > +
> > + dev_dbg(byteproc->dev, "s_selection: crop %ux%u@(%u,%u)\n",
> > + crop->width, crop->height, crop->left, crop->top);
> > + break;
> > + case V4L2_SEL_TGT_COMPOSE:
> > + dcmipp_byteproc_adjust_compose(&s->r, sink_fmt);
> > + *compose = s->r;
> > + *crop = s->r;
> > +
> > + dev_dbg(byteproc->dev, "s_selection: compose %ux%u@(%u,%u)\n",
> > + compose->width, compose->height,
> > + compose->left, compose->top);
> > + break;
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_pad_ops dcmipp_byteproc_pad_ops = {
> > + .init_cfg = dcmipp_byteproc_init_cfg,
> > + .enum_mbus_code = dcmipp_byteproc_enum_mbus_code,
> > + .enum_frame_size = dcmipp_byteproc_enum_frame_size,
> > + .get_fmt = dcmipp_byteproc_get_fmt,
> > + .set_fmt = dcmipp_byteproc_set_fmt,
> > + .get_selection = dcmipp_byteproc_get_selection,
> > + .set_selection = dcmipp_byteproc_set_selection,
> > +};
> > +
> > +static int dcmipp_byteproc_configure_scale_crop
> > + (struct dcmipp_byteproc_device *byteproc)
> > +{
> > + const struct dcmipp_byteproc_pix_map *vpix;
> > + struct v4l2_subdev_state *state;
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + u32 hprediv, vprediv;
> > + struct v4l2_rect *compose, *crop;
> > + u32 val = 0;
> > +
> > + state = v4l2_subdev_lock_and_get_active_state(&byteproc->sd);
> > + sink_fmt = v4l2_subdev_get_pad_format(&byteproc->sd, state, 0);
> > + compose = v4l2_subdev_get_pad_compose(&byteproc->sd, state, 0);
> > + crop = v4l2_subdev_get_pad_crop(&byteproc->sd, state, 1);
> > + v4l2_subdev_unlock_state(state);
> > +
> > + /* find output format bpp */
> > + vpix = dcmipp_byteproc_pix_map_by_code(sink_fmt->code);
> > + if (!vpix)
> > + return -EINVAL;
> > +
> > + /* clear decimation/crop */
> > + reg_clear(byteproc, DCMIPP_P0PPCR, DCMIPP_P0PPCR_BSM_MASK);
> > + reg_clear(byteproc, DCMIPP_P0PPCR, DCMIPP_P0PPCR_LSM);
> > + reg_write(byteproc, DCMIPP_P0SCSTR, 0);
> > + reg_write(byteproc, DCMIPP_P0SCSZR, 0);
> > +
> > + /* Ignore decimation/crop with JPEG */
> > + if (vpix->code == MEDIA_BUS_FMT_JPEG_1X8)
> > + return 0;
> > +
> > + /* decimation */
> > + hprediv = sink_fmt->width / compose->width;
> > + if (hprediv == 4)
> > + val |= DCMIPP_P0PPCR_BSM_1_4 << DCMIPP_P0PPCR_BSM_SHIFT;
> > + else if ((vpix->code == MEDIA_BUS_FMT_Y8_1X8) && (hprediv == 2))
> > + val |= DCMIPP_P0PPCR_BSM_1_2 << DCMIPP_P0PPCR_BSM_SHIFT;
> > + else if (hprediv == 2)
> > + val |= DCMIPP_P0PPCR_BSM_2_4 << DCMIPP_P0PPCR_BSM_SHIFT;
> > +
> > + vprediv = sink_fmt->height / compose->height;
> > + if (vprediv == 2)
> > + val |= DCMIPP_P0PPCR_LSM | DCMIPP_P0PPCR_OELS;
> > +
> > + /* decimate using bytes and lines skipping */
> > + if (val) {
> > + reg_set(byteproc, DCMIPP_P0PPCR, val);
> > +
> > + dev_dbg(byteproc->dev, "decimate to %dx%d [prediv=%dx%d]\n",
> > + compose->width, compose->height,
> > + hprediv, vprediv);
> > + }
> > +
> > + dev_dbg(byteproc->dev, "crop to %dx%d\n", crop->width, crop->height);
> > +
> > + /* expressed in 32-bits words on X axis, lines on Y axis */
> > + reg_write(byteproc, DCMIPP_P0SCSTR,
> > + (((crop->left * vpix->bpp) / 4) <<
> > + DCMIPP_P0SCSTR_HSTART_SHIFT) |
> > + (crop->top << DCMIPP_P0SCSTR_VSTART_SHIFT));
> > + reg_write(byteproc, DCMIPP_P0SCSZR,
> > + DCMIPP_P0SCSZR_ENABLE |
> > + (((crop->width * vpix->bpp) / 4) <<
> > + DCMIPP_P0SCSZR_HSIZE_SHIFT) |
> > + (crop->height << DCMIPP_P0SCSZR_VSIZE_SHIFT));
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_byteproc_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd);
> > + struct v4l2_subdev *s_subdev;
> > + struct media_pad *pad;
> > + int ret = 0;
> > +
> > + /* Get source subdev */
> > + pad = media_pad_remote_pad_first(&sd->entity.pads[0]);
> > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> > + return -EINVAL;
> > + s_subdev = media_entity_to_v4l2_subdev(pad->entity);
> > +
> > + if (enable) {
> > + ret = dcmipp_byteproc_configure_scale_crop(byteproc);
> > + if (ret)
> > + return ret;
> > +
> > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable);
> > + if (ret < 0) {
> > + dev_err(byteproc->dev,
> > + "failed to start source subdev streaming (%d)\n",
> > + ret);
> > + return ret;
> > + }
> > + } else {
> > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable);
> > + if (ret < 0) {
> > + dev_err(byteproc->dev,
> > + "failed to stop source subdev streaming (%d)\n",
> > + ret);
> > + return ret;
> > + }
> > + }
> > +
> > + byteproc->streaming = enable;
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops dcmipp_byteproc_video_ops = {
> > + .s_stream = dcmipp_byteproc_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_ops dcmipp_byteproc_ops = {
> > + .pad = &dcmipp_byteproc_pad_ops,
> > + .video = &dcmipp_byteproc_video_ops,
> > +};
> > +
> > +static void dcmipp_byteproc_release(struct v4l2_subdev *sd)
> > +{
> > + struct dcmipp_byteproc_device *byteproc = v4l2_get_subdevdata(sd);
> > +
> > + kfree(byteproc);
> > +}
> > +
> > +static const struct v4l2_subdev_internal_ops dcmipp_byteproc_int_ops = {
> > + .release = dcmipp_byteproc_release,
> > +};
> > +
> > +void dcmipp_byteproc_ent_release(struct dcmipp_ent_device *ved)
> > +{
> > + struct dcmipp_byteproc_device *byteproc =
> > + container_of(ved, struct dcmipp_byteproc_device, ved);
> > +
> > + dcmipp_ent_sd_unregister(ved, &byteproc->sd);
> > +}
> > +
> > +struct dcmipp_ent_device *
> > +dcmipp_byteproc_ent_init(struct device *dev, const char *entity_name,
> > + struct v4l2_device *v4l2_dev, void __iomem *regs)
> > +{
> > + struct dcmipp_byteproc_device *byteproc;
> > + struct v4l2_subdev_state *state;
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_rect *compose, *crop;
> > + struct v4l2_rect r = {
> > + .top = 0,
> > + .left = 0,
> > + .width = DCMIPP_FMT_WIDTH_DEFAULT,
> > + .height = DCMIPP_FMT_HEIGHT_DEFAULT,
> > + };
> > + int ret;
> > +
> > + /* Allocate the byteproc struct */
> > + byteproc = kzalloc(sizeof(*byteproc), GFP_KERNEL);
> > + if (!byteproc)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + byteproc->regs = regs;
> > +
> > + /* Initialize ved and sd */
> > + ret = dcmipp_ent_sd_register(&byteproc->ved, &byteproc->sd,
> > + v4l2_dev, entity_name,
> > + MEDIA_ENT_F_PROC_VIDEO_SCALER, 2,
> > + (const unsigned long[2]) {
> > + MEDIA_PAD_FL_SINK,
> > + MEDIA_PAD_FL_SOURCE,
> > + },
> > + &dcmipp_byteproc_int_ops,
> > + &dcmipp_byteproc_ops,
> > + NULL, NULL);
> > + if (ret) {
> > + kfree(byteproc);
> > + return ERR_PTR(ret);
> > + }
> > +
> > + byteproc->dev = dev;
> > +
> > + /* Initialize the frame format */
> > + state = v4l2_subdev_lock_and_get_active_state(&byteproc->sd);
> > + sink_fmt = v4l2_subdev_get_pad_format(&byteproc->sd, state, 0);
> > + *sink_fmt = fmt_default;
> > + compose = v4l2_subdev_get_pad_compose(&byteproc->sd, state, 0);
> > + *compose = r;
> > + crop = v4l2_subdev_get_pad_crop(&byteproc->sd, state, 1);
> > + *crop = r;
> > + v4l2_subdev_unlock_state(state);
> The dcmipp_ent_sd_register path should result in .init_cfg() being called
> for the subdev I think, which does all this already. So this is probably
> duplicated effort.

Agreed, removed.

> > +
> > + return &byteproc->ved;
> > +}
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
> > new file mode 100644
> > index 000000000000..76016955dc1d
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
> > @@ -0,0 +1,106 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +
> > +#include "dcmipp-common.h"
> > +
> > +/* Helper function to allocate and initialize pads */
> > +struct media_pad *dcmipp_pads_init(u16 num_pads, const unsigned long *pads_flag)
> > +{
> > + struct media_pad *pads;
> > + unsigned int i;
> > +
> > + /* Allocate memory for the pads */
> > + pads = kcalloc(num_pads, sizeof(*pads), GFP_KERNEL);
> > + if (!pads)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + /* Initialize the pads */
> > + for (i = 0; i < num_pads; i++) {
> > + pads[i].index = i;
> > + pads[i].flags = pads_flag[i];
> > + }
> > +
> > + return pads;
> > +}
> > +
> > +int dcmipp_ent_sd_register(struct dcmipp_ent_device *ved,
> > + struct v4l2_subdev *sd,
> > + struct v4l2_device *v4l2_dev,
> > + const char *const name,
> > + u32 function,
> > + u16 num_pads,
> > + const unsigned long *pads_flag,
> > + const struct v4l2_subdev_internal_ops *sd_int_ops,
> > + const struct v4l2_subdev_ops *sd_ops,
> > + irq_handler_t handler,
> > + irq_handler_t thread_fn)
> > +{
> > + int ret;
> > +
> > + /* Allocate the pads. Should be released from the sd_int_op release */
> > + ved->pads = dcmipp_pads_init(num_pads, pads_flag);
> > + if (IS_ERR(ved->pads))
> > + return PTR_ERR(ved->pads);
> > +
> > + /* Fill the dcmipp_ent_device struct */
> > + ved->ent = &sd->entity;
> > +
> > + /* Initialize the subdev */
> > + v4l2_subdev_init(sd, sd_ops);
> > + sd->internal_ops = sd_int_ops;
> > + sd->entity.function = function;
> > + sd->owner = THIS_MODULE;
> > + strscpy(sd->name, name, sizeof(sd->name));
> > + v4l2_set_subdevdata(sd, ved);
> > +
> > + /* Expose this subdev to user space */
> > + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > + if (sd->ctrl_handler)
> > + sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS;
> > +
> > + /* Initialize the media entity */
> > + ret = media_entity_pads_init(&sd->entity, num_pads, ved->pads);
> > + if (ret)
> > + goto err_clean_pads;
> > +
> > + ret = v4l2_subdev_init_finalize(sd);
> > + if (ret < 0)
> > + goto err_clean_m_ent;
> > +
> > + /* Register the subdev with the v4l2 and the media framework */
> > + ret = v4l2_device_register_subdev(v4l2_dev, sd);
> > + if (ret) {
> > + dev_err(v4l2_dev->dev,
> > + "%s: subdev register failed (err=%d)\n",
> > + name, ret);
> > + goto err_clean_m_ent;
> > + }
> > +
> > + ved->handler = handler;
> > + ved->thread_fn = thread_fn;
> > +
> > + return 0;
> > +
> > +err_clean_m_ent:
> > + media_entity_cleanup(&sd->entity);
> > +err_clean_pads:
> > + dcmipp_pads_cleanup(ved->pads);
> > + return ret;
> > +}
> > +
> > +void
> > +dcmipp_ent_sd_unregister(struct dcmipp_ent_device *ved, struct v4l2_subdev *sd)
> > +{
> > + media_entity_cleanup(ved->ent);
> > + v4l2_device_unregister_subdev(sd);
> > +}
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
> > new file mode 100644
> > index 000000000000..8f1f0c9bbc01
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
> > @@ -0,0 +1,207 @@
> > +/* SPDX-License-Identifier: GPL-2.0-or-later */
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#ifndef _DCMIPP_COMMON_H_
> > +#define _DCMIPP_COMMON_H_
> > +
> > +#include <linux/interrupt.h>
> > +#include <linux/slab.h>
> > +#include <media/media-device.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#define DCMIPP_PDEV_NAME "dcmipp"
> > +
> > +#define DCMIPP_FRAME_MAX_WIDTH 4096
> > +#define DCMIPP_FRAME_MAX_HEIGHT 2160
> > +#define DCMIPP_FRAME_MIN_WIDTH 16
> > +#define DCMIPP_FRAME_MIN_HEIGHT 16
> > +
> > +#define DCMIPP_FMT_WIDTH_DEFAULT 640
> > +#define DCMIPP_FMT_HEIGHT_DEFAULT 480
> > +
> > +#define DCMIPP_COLORSPACE_DEFAULT V4L2_COLORSPACE_REC709
> > +#define DCMIPP_YCBCR_ENC_DEFAULT V4L2_YCBCR_ENC_DEFAULT
> > +#define DCMIPP_QUANTIZATION_DEFAULT V4L2_QUANTIZATION_DEFAULT
> > +#define DCMIPP_XFER_FUNC_DEFAULT V4L2_XFER_FUNC_DEFAULT
> > +
> > +/**
> > + * struct dcmipp_colorimetry_clamp - Adjust colorimetry parameters
> > + *
> > + * @fmt: the pointer to struct v4l2_pix_format or
> > + * struct v4l2_mbus_framefmt
> > + *
> > + * Entities must check if colorimetry given by the userspace is valid, if not
> > + * then set them as DEFAULT
> > + */
> > +#define dcmipp_colorimetry_clamp(fmt) \
> > +do { \
> > + if ((fmt)->colorspace == V4L2_COLORSPACE_DEFAULT || \
> > + (fmt)->colorspace > V4L2_COLORSPACE_DCI_P3) { \
> > + (fmt)->colorspace = DCMIPP_COLORSPACE_DEFAULT; \
> > + (fmt)->ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT; \
> > + (fmt)->quantization = DCMIPP_QUANTIZATION_DEFAULT; \
> > + (fmt)->xfer_func = DCMIPP_XFER_FUNC_DEFAULT; \
> > + } \
> > + if ((fmt)->ycbcr_enc > V4L2_YCBCR_ENC_SMPTE240M) \
> > + (fmt)->ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT; \
> > + if ((fmt)->quantization > V4L2_QUANTIZATION_LIM_RANGE) \
> > + (fmt)->quantization = DCMIPP_QUANTIZATION_DEFAULT; \
> > + if ((fmt)->xfer_func > V4L2_XFER_FUNC_SMPTE2084) \
> > + (fmt)->xfer_func = DCMIPP_XFER_FUNC_DEFAULT; \
> > +} while (0)
> > +
> > +/**
> > + * struct dcmipp_ent_device - core struct that represents a node in the topology
> > + *
> > + * @ent: the pointer to struct media_entity for the node
> > + * @pads: the list of pads of the node
> > + * @process_frame: callback send a frame to that node
>
>
> A hangover? I can't see a member called process_frame. There's also some
> members missing from the documentation here and whilst I wouldn't ordinarily
> bother mentioning that I think in this case given the way the IRQ handling
> is working it might be beneficial to explain why they're embedded here
> rather than just assigned at probe.

Yes, description added with explanations regarding irq handling

>
> > + *
> > + * Each node of the topology must create a dcmipp_ent_device struct.
> > + * Depending on the node it will be of an instance of v4l2_subdev or
> > + * video_device struct where both contains a struct media_entity.
> > + * Those structures should embedded the dcmipp_ent_device struct through
> > + * v4l2_set_subdevdata() and video_set_drvdata() respectivaly, allowing the
> > + * dcmipp_ent_device struct to be retrieved from the corresponding struct
> > + * media_entity
> > + */
> > +struct dcmipp_ent_device {
> > + struct media_entity *ent;
> > + struct media_pad *pads;
> > +
> > + /* Parallel input device */
> > + struct v4l2_mbus_config_parallel bus;
> > + enum v4l2_mbus_type bus_type;
> > + irq_handler_t handler;
> > + irqreturn_t handler_ret;
> > + irq_handler_t thread_fn;
> > +};
> > +
> > +/**
> > + * dcmipp_pads_init - initialize pads
> > + *
> > + * @num_pads: number of pads to initialize
> > + * @pads_flags: flags to use in each pad
> > + *
> > + * Helper functions to allocate/initialize pads
> > + */
> > +struct media_pad *dcmipp_pads_init(u16 num_pads,
> > + const unsigned long *pads_flag);
> > +
> > +/**
> > + * dcmipp_pads_cleanup - free pads
> > + *
> > + * @pads: pointer to the pads
> > + *
> > + * Helper function to free the pads initialized with dcmipp_pads_init
> > + */
> > +static inline void dcmipp_pads_cleanup(struct media_pad *pads)
> > +{
> > + kfree(pads);
> > +}
> > +
> > +/**
> > + * dcmipp_ent_sd_register - initialize and register a subdev node
> > + *
> > + * @ved: the dcmipp_ent_device struct to be initialize
> > + * @sd: the v4l2_subdev struct to be initialize and registered
> > + * @v4l2_dev: the v4l2 device to register the v4l2_subdev
> > + * @name: name of the sub-device. Please notice that the name must be
> > + * unique.
> > + * @function: media entity function defined by MEDIA_ENT_F_* macros
> > + * @num_pads: number of pads to initialize
> > + * @pads_flag: flags to use in each pad
> > + * @sd_int_ops: pointer to &struct v4l2_subdev_internal_ops
> > + * @sd_ops: pointer to &struct v4l2_subdev_ops.
> > + *
> > + * Helper function initialize and register the struct dcmipp_ent_device and
> > + * struct v4l2_subdev which represents a subdev node in the topology
> > + */
> > +int dcmipp_ent_sd_register(struct dcmipp_ent_device *ved,
> > + struct v4l2_subdev *sd,
> > + struct v4l2_device *v4l2_dev,
> > + const char *const name,
> > + u32 function,
> > + u16 num_pads,
> > + const unsigned long *pads_flag,
> > + const struct v4l2_subdev_internal_ops *sd_int_ops,
> > + const struct v4l2_subdev_ops *sd_ops,
> > + irq_handler_t handler,
> > + irq_handler_t thread_fn);
> > +
> > +/**
> > + * dcmipp_ent_sd_unregister - cleanup and unregister a subdev node
> > + *
> > + * @ved: the dcmipp_ent_device struct to be cleaned up
> > + * @sd: the v4l2_subdev struct to be unregistered
> > + *
> > + * Helper function cleanup and unregister the struct dcmipp_ent_device and
> > + * struct v4l2_subdev which represents a subdev node in the topology
> > + */
> > +void dcmipp_ent_sd_unregister(struct dcmipp_ent_device *ved,
> > + struct v4l2_subdev *sd);
> > +
> > +#define reg_write(device, reg, val) \
> > + (__reg_write((device)->dev, (device)->regs, (reg), (val)))
> > +#define reg_read(device, reg) \
> > + (__reg_read((device)->dev, (device)->regs, (reg)))
> > +#define reg_set(device, reg, mask) \
> > + (__reg_set((device)->dev, (device)->regs, (reg), (mask)))
> > +#define reg_clear(device, reg, mask) \
> > + (__reg_clear((device)->dev, (device)->regs, (reg), (mask)))
> > +
> > +static inline u32 __reg_read(struct device *dev, void __iomem *base, u32 reg)
> > +{
> > + u32 val = readl_relaxed(base + reg);
> > +
> > + dev_dbg(dev, "RD 0x%x %#10.8x\n", reg, val);
> > + return val;
> > +}
> > +
> > +static inline void __reg_write(struct device *dev, void __iomem *base, u32 reg,
> > + u32 val)
> > +{
> > + dev_dbg(dev, "WR 0x%x %#10.8x\n", reg, val);
> > + writel_relaxed(val, base + reg);
> > +}
> > +
> > +static inline void __reg_set(struct device *dev, void __iomem *base, u32 reg,
> > + u32 mask)
> > +{
> > + dev_dbg(dev, "SET 0x%x %#10.8x\n", reg, mask);
> > + __reg_write(dev, base, reg, readl_relaxed(base + reg) | mask);
> > +}
> > +
> > +static inline void __reg_clear(struct device *dev, void __iomem *base, u32 reg,
> > + u32 mask)
> > +{
> > + dev_dbg(dev, "CLR 0x%x %#10.8x\n", reg, mask);
> > + __reg_write(dev, base, reg, readl_relaxed(base + reg) & ~mask);
> > +}
> > +
> > +/* DCMIPP subdev init / release entry points */
> > +struct dcmipp_ent_device *dcmipp_par_ent_init(struct device *dev,
> > + const char *entity_name,
> > + struct v4l2_device *v4l2_dev,
> > + void __iomem *regs);
> > +void dcmipp_par_ent_release(struct dcmipp_ent_device *ved);
> > +struct dcmipp_ent_device *
> > +dcmipp_byteproc_ent_init(struct device *dev, const char *entity_name,
> > + struct v4l2_device *v4l2_dev, void __iomem *regs);
> > +void dcmipp_byteproc_ent_release(struct dcmipp_ent_device *ved);
> > +struct dcmipp_ent_device *dcmipp_bytecap_ent_init(struct device *dev,
> > + const char *entity_name,
> > + struct v4l2_device *v4l2_dev,
> > + void __iomem *regs);
> > +void dcmipp_bytecap_ent_release(struct dcmipp_ent_device *ved);
> > +
> > +#endif
> > +
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
> > new file mode 100644
> > index 000000000000..c8fccfb6f4b4
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
> > @@ -0,0 +1,603 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/pinctrl/consumer.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/property.h>
> > +#include <linux/reset.h>
> > +#include <media/media-device.h>
> > +#include <media/v4l2-device.h>
> > +#include <media/v4l2-fwnode.h>
> > +
> > +#include "dcmipp-common.h"
> > +
> > +#define DCMIPP_MDEV_MODEL_NAME "DCMIPP MDEV"
> > +
> > +#define DCMIPP_ENT_LINK(src, srcpad, sink, sinkpad, link_flags) { \
> > + .src_ent = src, \
> > + .src_pad = srcpad, \
> > + .sink_ent = sink, \
> > + .sink_pad = sinkpad, \
> > + .flags = link_flags, \
> > +}
> > +
> > +struct dcmipp_device {
> > + /* The platform device */
> > + struct platform_device pdev;
> > + struct device *dev;
> > +
> > + /* Hardware resources */
> > + struct reset_control *rstc;
> > + void __iomem *regs;
> > + struct clk *kclk;
> > +
> > + /* The pipeline configuration */
> > + const struct dcmipp_pipeline_config *pipe_cfg;
> > +
> > + /* The Associated media_device parent */
> > + struct media_device mdev;
> > +
> > + /* Internal v4l2 parent device*/
> > + struct v4l2_device v4l2_dev;
> > +
> > + /* Entities */
> > + struct dcmipp_ent_device **entity;
> > +
> > + struct v4l2_async_notifier notifier;
> > +};
> > +
> > +static inline struct dcmipp_device *
> > +notifier_to_dcmipp(struct v4l2_async_notifier *n)
> > +{
> > + return container_of(n, struct dcmipp_device, notifier);
> > +}
> > +
> > +/* Structure which describes individual configuration for each entity */
> > +struct dcmipp_ent_config {
> > + const char *name;
> > + struct dcmipp_ent_device *(*init)
> > + (struct device *dev, const char *entity_name,
> > + struct v4l2_device *v4l2_dev, void __iomem *regs);
> > + void (*release)(struct dcmipp_ent_device *ved);
> > +};
> > +
> > +/* Structure which describes links between entities */
> > +struct dcmipp_ent_link {
> > + unsigned int src_ent;
> > + u16 src_pad;
> > + unsigned int sink_ent;
> > + u16 sink_pad;
> > + u32 flags;
> > +};
> > +
> > +/* Structure which describes the whole topology */
> > +struct dcmipp_pipeline_config {
> > + const struct dcmipp_ent_config *ents;
> > + size_t num_ents;
> > + const struct dcmipp_ent_link *links;
> > + size_t num_links;
> > +};
> > +
> > +/* --------------------------------------------------------------------------
> > + * Topology Configuration
> > + */
> > +
> > +static const struct dcmipp_ent_config stm32mp13_ent_config[] = {
> > + {
> > + .name = "dcmipp_parallel",
> > + .init = dcmipp_par_ent_init,
> > + .release = dcmipp_par_ent_release,
> > + },
> > + {
> > + .name = "dcmipp_dump_postproc",
> > + .init = dcmipp_byteproc_ent_init,
> > + .release = dcmipp_byteproc_ent_release,
> > + },
> > + {
> > + .name = "dcmipp_dump_capture",
> > + .init = dcmipp_bytecap_ent_init,
> > + .release = dcmipp_bytecap_ent_release,
> > + },
> > +};
> > +
> > +#define ID_PARALLEL 0
> > +#define ID_DUMP_BYTEPROC 1
> > +#define ID_DUMP_CAPTURE 2
> > +
> > +static const struct dcmipp_ent_link stm32mp13_ent_links[] = {
> > + DCMIPP_ENT_LINK(ID_PARALLEL, 1, ID_DUMP_BYTEPROC, 0,
> > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
> > + DCMIPP_ENT_LINK(ID_DUMP_BYTEPROC, 1, ID_DUMP_CAPTURE, 0,
> > + MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE),
> > +};
> > +
> > +static const struct dcmipp_pipeline_config stm32mp13_pipe_cfg = {
> > + .ents = stm32mp13_ent_config,
> > + .num_ents = ARRAY_SIZE(stm32mp13_ent_config),
> > + .links = stm32mp13_ent_links,
> > + .num_links = ARRAY_SIZE(stm32mp13_ent_links)
> > +};
> > +
> > +#define LINK_FLAG_TO_STR(f) ((f) == 0 ? "" :\
> > + (f) == MEDIA_LNK_FL_ENABLED ? "ENABLED" :\
> > + (f) == MEDIA_LNK_FL_IMMUTABLE ? "IMMUTABLE" :\
> > + (f) == (MEDIA_LNK_FL_ENABLED |\
> > + MEDIA_LNK_FL_IMMUTABLE) ?\
> > + "ENABLED, IMMUTABLE" :\
> > + "UNKNOWN")
> > +
> > +static int dcmipp_create_links(struct dcmipp_device *dcmipp)
> > +{
> > + unsigned int i;
> > + int ret;
> > +
> > + /* Initialize the links between entities */
> > + for (i = 0; i < dcmipp->pipe_cfg->num_links; i++) {
> > + const struct dcmipp_ent_link *link =
> > + &dcmipp->pipe_cfg->links[i];
> > + struct dcmipp_ent_device *ved_src =
> > + dcmipp->entity[link->src_ent];
> > + struct dcmipp_ent_device *ved_sink =
> > + dcmipp->entity[link->sink_ent];
> > +
> > + dev_dbg(dcmipp->dev, "Create link \"%s\":%d -> %d:\"%s\" [%s]\n",
> > + dcmipp->pipe_cfg->ents[link->src_ent].name,
> > + link->src_pad, link->sink_pad,
> > + dcmipp->pipe_cfg->ents[link->sink_ent].name,
> > + LINK_FLAG_TO_STR(link->flags));
> > +
> > + ret = media_create_pad_link(ved_src->ent, link->src_pad,
> > + ved_sink->ent, link->sink_pad,
> > + link->flags);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_graph_init(struct dcmipp_device *dcmipp);
> > +
> > +static int dcmipp_create_subdevs(struct dcmipp_device *dcmipp)
> > +{
> > + int ret, i;
> > +
> > + /* Call all subdev inits */
> > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) {
> > + const char *name = dcmipp->pipe_cfg->ents[i].name;
> > +
> > + dev_dbg(dcmipp->dev, "add subdev %s\n", name);
> > + dcmipp->entity[i] =
> > + dcmipp->pipe_cfg->ents[i].init(dcmipp->dev, name,
> > + &dcmipp->v4l2_dev,
> > + dcmipp->regs);
> > + if (IS_ERR(dcmipp->entity[i])) {
> > + dev_err(dcmipp->dev, "failed to init subdev %s\n",
> > + name);
> > + ret = PTR_ERR(dcmipp->entity[i]);
> > + goto err_init_entity;
> > + }
> > + }
> > +
> > + /* Initialize links */
> > + ret = dcmipp_create_links(dcmipp);
> > + if (ret)
> > + goto err_init_entity;
> > +
> > + ret = dcmipp_graph_init(dcmipp);
> > + if (ret < 0)
> > + goto err_init_entity;
> > +
> > + return 0;
> > +
> > +err_init_entity:
> > + while (i > 0)
> > + dcmipp->pipe_cfg->ents[i - 1].release(dcmipp->entity[i - 1]);
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id dcmipp_of_match[] = {
> > + { .compatible = "st,stm32mp13-dcmipp", .data = &stm32mp13_pipe_cfg },
> > + { /* end node */ },
> > +};
> > +MODULE_DEVICE_TABLE(of, dcmipp_of_match);
> > +
> > +static int dcmipp_graph_notify_complete(struct v4l2_async_notifier *notifier)
> > +{
> > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier);
> > + int ret;
> > +
> > + /* Register the media device */
> > + ret = media_device_register(&dcmipp->mdev);
> > + if (ret) {
> > + dev_err(dcmipp->mdev.dev,
> > + "media device register failed (err=%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Expose all subdev's nodes*/
> > + ret = v4l2_device_register_subdev_nodes(&dcmipp->v4l2_dev);
> > + if (ret) {
> > + dev_err(dcmipp->mdev.dev,
> > + "dcmipp subdev nodes registration failed (err=%d)\n",
> > + ret);
> > + media_device_unregister(&dcmipp->mdev);
> > + return ret;
> > + }
> > +
> > + dev_dbg(dcmipp->dev, "Notify complete !\n");
> > +
> > + return 0;
> > +}
> > +
> > +static void dcmipp_graph_notify_unbind(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *sd,
> > + struct v4l2_async_connection *asd)
> > +{
> > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier);
> > +
> > + dev_dbg(dcmipp->dev, "Removing %s\n", sd->name);
> > +}
>
>
> Can these two functions go next to dcmipp_graph_notify_bound() below?

Done

>
> > +
> > +static irqreturn_t dcmipp_irq_thread(int irq, void *arg)
> > +{
> > + struct dcmipp_device *dcmipp = arg;
> > + struct dcmipp_ent_device *ved;
> > + unsigned int i;
> > +
> > + /* Call irq thread of each entities of pipeline */
> > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) {
> > + ved = dcmipp->entity[i];
> > + if (ved->thread_fn && ved->handler_ret == IRQ_WAKE_THREAD)
> > + ved->thread_fn(irq, ved);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t dcmipp_irq_callback(int irq, void *arg)
> > +{
> > + struct dcmipp_device *dcmipp = arg;
> > + struct dcmipp_ent_device *ved;
> > + irqreturn_t ret = IRQ_HANDLED;
> > + unsigned int i;
> > +
> > + /* Call irq handler of each entities of pipeline */
> > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++) {
> > + ved = dcmipp->entity[i];
> > + if (ved->handler)
> > + ved->handler_ret = ved->handler(irq, ved);
> > + else if (ved->thread_fn)
> > + ved->handler_ret = IRQ_WAKE_THREAD;
> > + else
> > + ved->handler_ret = IRQ_HANDLED;
> > + if (ved->handler_ret != IRQ_HANDLED)
> > + ret = ved->handler_ret;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int dcmipp_graph_notify_bound(struct v4l2_async_notifier *notifier,
> > + struct v4l2_subdev *subdev,
> > + struct v4l2_async_connection *asd)
> > +{
> > + struct dcmipp_device *dcmipp = notifier_to_dcmipp(notifier);
> > + unsigned int ret;
> > + int src_pad;
> > + struct dcmipp_ent_device *sink;
> > + struct v4l2_fwnode_endpoint vep = { .bus_type = V4L2_MBUS_PARALLEL };
> > + struct fwnode_handle *ep;
> > +
> > + dev_dbg(dcmipp->dev, "Subdev \"%s\" bound\n", subdev->name);
> > +
> > + /*
> > + * Link this sub-device to DCMIPP, it could be
> > + * a parallel camera sensor or a CSI-2 to parallel bridge
> > + */
> > + src_pad = media_entity_get_fwnode_pad(&subdev->entity,
> > + subdev->fwnode,
> > + MEDIA_PAD_FL_SOURCE);
> > +
> > + /* Get bus characteristics from devicetree */
> > + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dcmipp->dev), 0, 0,
> > + FWNODE_GRAPH_ENDPOINT_NEXT);
> > + if (!ep) {
> > + dev_err(dcmipp->dev, "Could not find the endpoint\n");
> > + return -ENODEV;
> > + }
> > +
> > + /* Check for parallel bus-type first, then bt656 */
> > + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > + if (ret) {
> > + vep.bus_type = V4L2_MBUS_BT656;
> > + ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > + if (ret) {
> > + dev_err(dcmipp->dev, "Could not parse the endpoint\n");
> > + fwnode_handle_put(ep);
> > + return ret;
> > + }
> > + }
> > +
> > + fwnode_handle_put(ep);
> > +
> > + if (vep.bus.parallel.bus_width == 0) {
> > + dev_err(dcmipp->dev, "Invalid parallel interface bus-width\n");
> > + return -ENODEV;
> > + }
> > +
> > + /* Only 8 bits bus width supported with BT656 bus */
> > + if (vep.bus_type == V4L2_MBUS_BT656 &&
> > + vep.bus.parallel.bus_width != 8) {
> > + dev_err(dcmipp->dev, "BT656 bus conflicts with %u bits bus width (8 bits required)\n",
> > + vep.bus.parallel.bus_width);
> > + return -ENODEV;
> > + }
> > +
> > + /* Parallel input device detected, connect it to parallel subdev */
> > + sink = dcmipp->entity[ID_PARALLEL];
> > + sink->bus.flags = vep.bus.parallel.flags;
> > + sink->bus.bus_width = vep.bus.parallel.bus_width;
> > + sink->bus.data_shift = vep.bus.parallel.data_shift;
> > + sink->bus_type = vep.bus_type;
> > + ret = media_create_pad_link(&subdev->entity, src_pad, sink->ent, 0,
> > + MEDIA_LNK_FL_IMMUTABLE |
> > + MEDIA_LNK_FL_ENABLED);
> > + if (ret) {
> > + dev_err(dcmipp->dev, "Failed to create media pad link with subdev \"%s\"\n",
> > + subdev->name);
> > + return ret;
> > + }
> > +
> > + dev_dbg(dcmipp->dev, "DCMIPP is now linked to \"%s\"\n", subdev->name);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_async_notifier_operations dcmipp_graph_notify_ops = {
> > + .bound = dcmipp_graph_notify_bound,
> > + .unbind = dcmipp_graph_notify_unbind,
> > + .complete = dcmipp_graph_notify_complete,
> > +};
> > +
> > +static int dcmipp_graph_init(struct dcmipp_device *dcmipp)
> > +{
> > + struct v4l2_async_connection *asd;
> > + struct fwnode_handle *ep;
> > + int ret;
> > +
> > + ep = fwnode_graph_get_next_endpoint(dev_fwnode(dcmipp->dev), NULL);
> > + if (!ep) {
> > + dev_err(dcmipp->dev, "Failed to get next endpoint\n");
> > + return -EINVAL;
> > + }
> > +
> > + v4l2_async_nf_init(&dcmipp->notifier, &dcmipp->v4l2_dev);
> > +
> > + asd = v4l2_async_nf_add_fwnode_remote(&dcmipp->notifier, ep,
> > + struct v4l2_async_connection);
> > +
> > + fwnode_handle_put(ep);
> > +
> > + if (IS_ERR(asd)) {
> > + dev_err(dcmipp->dev, "Failed to add fwnode remote subdev\n");
> > + return PTR_ERR(asd);
> > + }
> > +
> > + dcmipp->notifier.ops = &dcmipp_graph_notify_ops;
> > +
> > + ret = v4l2_async_nf_register(&dcmipp->notifier);
> > + if (ret < 0) {
> > + dev_err(dcmipp->dev, "Failed to register notifier\n");
> > + v4l2_async_nf_cleanup(&dcmipp->notifier);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_probe(struct platform_device *pdev)
> > +{
> > + struct dcmipp_device *dcmipp;
> > + struct clk *kclk;
> > + const struct dcmipp_pipeline_config *pipe_cfg;
> > + int irq;
> > + int ret;
> > +
> > + dcmipp = devm_kzalloc(&pdev->dev, sizeof(*dcmipp), GFP_KERNEL);
> > + if (!dcmipp)
> > + return -ENOMEM;
> > +
> > + dcmipp->dev = &pdev->dev;
> > +
> > + pipe_cfg = of_device_get_match_data(&pdev->dev);
> > + if (!pipe_cfg) {
> > + dev_err(&pdev->dev, "Can't get device data\n");
> > + return -ENODEV;
> > + }
> > + dcmipp->pipe_cfg = pipe_cfg;
> > +
> > + platform_set_drvdata(pdev, dcmipp);
> > +
> > + /* Get hardware resources from devicetree */
> > + dcmipp->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> > + if (IS_ERR(dcmipp->rstc))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(dcmipp->rstc),
> > + "Could not get reset control\n");
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq <= 0) {
> > + if (irq != -EPROBE_DEFER)
> > + dev_err(&pdev->dev, "Could not get irq\n");
> > + return irq ? irq : -ENXIO;
> > + }
> > +
> > + dcmipp->regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
> > + if (IS_ERR(dcmipp->regs)) {
> > + dev_err(&pdev->dev, "Could not map registers\n");
> > + return PTR_ERR(dcmipp->regs);
> > + }
> > +
> > + ret = devm_request_threaded_irq(&pdev->dev, irq, dcmipp_irq_callback,
> > + dcmipp_irq_thread, IRQF_ONESHOT,
> > + dev_name(&pdev->dev), dcmipp);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
> > + return ret;
> > + }
> > +
> > + /* Reset device */
> > + ret = reset_control_assert(dcmipp->rstc);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to assert the reset line\n");
> > + return ret;
> > + }
> > +
> > + usleep_range(3000, 5000);
> > +
> > + ret = reset_control_deassert(dcmipp->rstc);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to deassert the reset line\n");
> > + return ret;
> > + }
> > +
> > + kclk = devm_clk_get(&pdev->dev, NULL);
> > + if (IS_ERR(kclk))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(kclk),
> > + "Unable to get kclk\n");
> > + dcmipp->kclk = kclk;
> > +
> > + dcmipp->entity = devm_kcalloc(&pdev->dev, dcmipp->pipe_cfg->num_ents,
> > + sizeof(*dcmipp->entity), GFP_KERNEL);
> > + if (!dcmipp->entity)
> > + return -ENOMEM;
> > +
> > + /* Register the v4l2 struct */
> > + ret = v4l2_device_register(&pdev->dev, &dcmipp->v4l2_dev);
> > + if (ret) {
> > + dev_err(&pdev->dev,
> > + "v4l2 device register failed (err=%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Link the media device within the v4l2_device */
> > + dcmipp->v4l2_dev.mdev = &dcmipp->mdev;
> > +
> > + /* Initialize media device */
> > + strscpy(dcmipp->mdev.model, DCMIPP_MDEV_MODEL_NAME,
> > + sizeof(dcmipp->mdev.model));
> > + dcmipp->mdev.dev = &pdev->dev;
> > + media_device_init(&dcmipp->mdev);
> > +
> > + /* Initialize subdevs */
> > + ret = dcmipp_create_subdevs(dcmipp);
> > + if (ret) {
> > + media_device_cleanup(&dcmipp->mdev);
> > + v4l2_device_unregister(&dcmipp->v4l2_dev);
> > + return ret;
> > + }
> > +
> > + pm_runtime_enable(dcmipp->dev);
> > +
> > + dev_info(&pdev->dev, "Probe done");
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_remove(struct platform_device *pdev)
> > +{
> > + struct dcmipp_device *dcmipp = platform_get_drvdata(pdev);
> > + unsigned int i;
> > +
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + v4l2_async_nf_unregister(&dcmipp->notifier);
> > + v4l2_async_nf_cleanup(&dcmipp->notifier);
> > +
> > + media_device_unregister(&dcmipp->mdev);
> > + media_device_cleanup(&dcmipp->mdev);
> > +
> > + for (i = 0; i < dcmipp->pipe_cfg->num_ents; i++)
> > + dcmipp->pipe_cfg->ents[i].release(dcmipp->entity[i]);
> > +
> > + v4l2_device_unregister(&dcmipp->v4l2_dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_runtime_suspend(struct device *dev)
> > +{
> > + struct dcmipp_device *dcmipp = dev_get_drvdata(dev);
> > +
> > + clk_disable_unprepare(dcmipp->kclk);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_runtime_resume(struct device *dev)
> > +{
> > + struct dcmipp_device *dcmipp = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(dcmipp->kclk);
> > + if (ret)
> > + dev_err(dev, "%s: Failed to prepare_enable kclk\n", __func__);
> > +
> > + return ret;
> > +}
> > +
> > +static int dcmipp_suspend(struct device *dev)
> > +{
> > + /* disable clock */
> > + pm_runtime_force_suspend(dev);
> > +
> > + /* change pinctrl state */
> > + pinctrl_pm_select_sleep_state(dev);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_resume(struct device *dev)
> > +{
> > + /* restore pinctl default state */
> > + pinctrl_pm_select_default_state(dev);
> > +
> > + /* clock enable */
> > + pm_runtime_force_resume(dev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops dcmipp_pm_ops = {
> > + SYSTEM_SLEEP_PM_OPS(dcmipp_suspend, dcmipp_resume)
> > + RUNTIME_PM_OPS(dcmipp_runtime_suspend, dcmipp_runtime_resume, NULL)
> > +};
> > +
> > +static struct platform_driver dcmipp_pdrv = {
> > + .probe = dcmipp_probe,
> > + .remove = dcmipp_remove,
> > + .driver = {
> > + .name = DCMIPP_PDEV_NAME,
> > + .of_match_table = dcmipp_of_match,
> > + .pm = pm_ptr(&dcmipp_pm_ops),
> > + },
> > +};
> > +
> > +module_platform_driver(dcmipp_pdrv);
> > +
> > +MODULE_AUTHOR("Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>");
> > +MODULE_AUTHOR("Alain Volmat <alain.volmat@xxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("STMicroelectronics STM32 Digital Camera Memory Interface with Pixel Processor driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c
> > new file mode 100644
> > index 000000000000..fbde198a571a
> > --- /dev/null
> > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c
> > @@ -0,0 +1,461 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Driver for STM32 Digital Camera Memory Interface Pixel Processor
> > + *
> > + * Copyright (C) STMicroelectronics SA 2022
> > + * Authors: Hugues Fruchet <hugues.fruchet@xxxxxxxxxxx>
> > + * Alain Volmat <alain.volmat@xxxxxxxxxxx>
> > + * for STMicroelectronics.
> > + */
> > +
> > +#include <linux/v4l2-mediabus.h>
> > +#include <media/v4l2-event.h>
> > +#include <media/v4l2-subdev.h>
> > +
> > +#include "dcmipp-common.h"
> > +
> > +#define DCMIPP_PRCR 0x104
> > +#define DCMIPP_PRCR_FORMAT_SHIFT 16
> > +#define DCMIPP_PRCR_FORMAT_YUV422 0x1e
> > +#define DCMIPP_PRCR_FORMAT_RGB565 0x22
> > +#define DCMIPP_PRCR_FORMAT_RAW8 0x2a
> > +#define DCMIPP_PRCR_FORMAT_G8 0x4a
> > +#define DCMIPP_PRCR_FORMAT_BYTE_STREAM 0x5a
> > +#define DCMIPP_PRCR_ESS BIT(4)
> > +#define DCMIPP_PRCR_PCKPOL BIT(5)
> > +#define DCMIPP_PRCR_HSPOL BIT(6)
> > +#define DCMIPP_PRCR_VSPOL BIT(7)
> > +#define DCMIPP_PRCR_ENABLE BIT(14)
> > +#define DCMIPP_PRCR_SWAPCYCLES BIT(25)
> > +
> > +#define DCMIPP_PRESCR 0x108
> > +#define DCMIPP_PRESUR 0x10c
> > +
> > +#define IS_SINK(pad) (!(pad))
> > +#define IS_SRC(pad) ((pad))
> > +
> > +struct dcmipp_par_pix_map {
> > + unsigned int code_sink;
> > + unsigned int code_src;
> > + u8 prcr_format;
> > + u8 prcr_swapcycles;
> > +};
> > +
> > +#define PIXMAP_SINK_SRC_PRCR_SWAP(sink, src, prcr, swap) \
> > + { \
> > + .code_sink = MEDIA_BUS_FMT_##sink, \
> > + .code_src = MEDIA_BUS_FMT_##src, \
> > + .prcr_format = DCMIPP_PRCR_FORMAT_##prcr, \
> > + .prcr_swapcycles = swap, \
> > + }
> > +static const struct dcmipp_par_pix_map dcmipp_par_pix_map_list[] = {
> > + /* RGB565 */
> > + PIXMAP_SINK_SRC_PRCR_SWAP(RGB565_2X8_LE, RGB565_2X8_LE, RGB565, 1),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(RGB565_2X8_BE, RGB565_2X8_LE, RGB565, 0),
> > + /* YUV422 */
> > + PIXMAP_SINK_SRC_PRCR_SWAP(YUYV8_2X8, YUYV8_2X8, YUV422, 1),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(YUYV8_2X8, UYVY8_2X8, YUV422, 0),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(UYVY8_2X8, UYVY8_2X8, YUV422, 1),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(UYVY8_2X8, YUYV8_2X8, YUV422, 0),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(YVYU8_2X8, YVYU8_2X8, YUV422, 1),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(VYUY8_2X8, VYUY8_2X8, YUV422, 1),
> > + /* GREY */
> > + PIXMAP_SINK_SRC_PRCR_SWAP(Y8_1X8, Y8_1X8, G8, 0),
> > + /* Raw Bayer */
> > + PIXMAP_SINK_SRC_PRCR_SWAP(SBGGR8_1X8, SBGGR8_1X8, RAW8, 0),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(SGBRG8_1X8, SGBRG8_1X8, RAW8, 0),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(SGRBG8_1X8, SGRBG8_1X8, RAW8, 0),
> > + PIXMAP_SINK_SRC_PRCR_SWAP(SRGGB8_1X8, SRGGB8_1X8, RAW8, 0),
> > + /* JPEG */
> > + PIXMAP_SINK_SRC_PRCR_SWAP(JPEG_1X8, JPEG_1X8, BYTE_STREAM, 0),
> > +};
> > +
> > +/*
> > + * Search through the pix_map table, skipping two consecutive entry with the
> > + * same code
> > + */
> > +static inline const struct dcmipp_par_pix_map *dcmipp_par_pix_map_by_index
> > + (unsigned int index,
> > + unsigned int pad)
> > +{
> > + unsigned int i = 0;
> > + u32 prev_code = 0, cur_code;
> > +
> > + while (i < ARRAY_SIZE(dcmipp_par_pix_map_list)) {
> > + if (IS_SRC(pad))
> > + cur_code = dcmipp_par_pix_map_list[i].code_src;
> > + else
> > + cur_code = dcmipp_par_pix_map_list[i].code_sink;
> > +
> > + if (cur_code == prev_code) {
> > + i++;
> > + continue;
> > + }
> > + prev_code = cur_code;
> > +
> > + if (index == 0)
> > + break;
> > + i++;
> > + index--;
> > + }
> > +
> > + if (i >= ARRAY_SIZE(dcmipp_par_pix_map_list))
> > + return NULL;
> > +
> > + return &dcmipp_par_pix_map_list[i];
> > +}
> > +
> > +static inline const struct dcmipp_par_pix_map *dcmipp_par_pix_map_by_code
> > + (u32 code_sink, u32 code_src)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < ARRAY_SIZE(dcmipp_par_pix_map_list); i++) {
> > + if ((dcmipp_par_pix_map_list[i].code_sink == code_sink &&
> > + dcmipp_par_pix_map_list[i].code_src == code_src) ||
> > + (dcmipp_par_pix_map_list[i].code_sink == code_src &&
> > + dcmipp_par_pix_map_list[i].code_src == code_sink) ||
> > + (dcmipp_par_pix_map_list[i].code_sink == code_sink &&
> > + code_src == 0) ||
> > + (code_sink == 0 &&
> > + dcmipp_par_pix_map_list[i].code_src == code_src))
> > + return &dcmipp_par_pix_map_list[i];
> > + }
> > + return NULL;
> > +}
> > +
> > +struct dcmipp_par_device {
> > + struct dcmipp_ent_device ved;
> > + struct v4l2_subdev sd;
> > + struct device *dev;
> > + void __iomem *regs;
> > + bool streaming;
> > +};
> > +
> > +static const struct v4l2_mbus_framefmt fmt_default = {
> > + .width = DCMIPP_FMT_WIDTH_DEFAULT,
> > + .height = DCMIPP_FMT_HEIGHT_DEFAULT,
> > + .code = MEDIA_BUS_FMT_RGB565_2X8_LE,
> > + .field = V4L2_FIELD_NONE,
> > + .colorspace = DCMIPP_COLORSPACE_DEFAULT,
> > + .ycbcr_enc = DCMIPP_YCBCR_ENC_DEFAULT,
> > + .quantization = DCMIPP_QUANTIZATION_DEFAULT,
> > + .xfer_func = DCMIPP_XFER_FUNC_DEFAULT,
> > +};
> > +
> > +static int dcmipp_par_init_cfg(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state)
> > +{
> > + unsigned int i;
> > +
> > + for (i = 0; i < sd->entity.num_pads; i++) {
> > + struct v4l2_mbus_framefmt *mf;
> > +
> > + mf = v4l2_subdev_get_try_format(sd, sd_state, i);
> > + *mf = fmt_default;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_par_enum_mbus_code(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_mbus_code_enum *code)
> > +{
> > + const struct dcmipp_par_pix_map *vpix =
> > + dcmipp_par_pix_map_by_index(code->index, code->pad);
> > +
> > + if (!vpix)
> > + return -EINVAL;
> > +
> > + code->code = IS_SRC(code->pad) ? vpix->code_src : vpix->code_sink;
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_par_enum_frame_size(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_frame_size_enum *fse)
> > +{
> > + const struct dcmipp_par_pix_map *vpix;
> > +
> > + if (fse->index)
> > + return -EINVAL;
> > +
> > + /* Only accept code in the pix map table */
> > + vpix = dcmipp_par_pix_map_by_code(IS_SINK(fse->pad) ? fse->code : 0,
> > + IS_SRC(fse->pad) ? fse->code : 0);
> > + if (!vpix)
> > + return -EINVAL;
> > +
> > + fse->min_width = DCMIPP_FRAME_MIN_WIDTH;
> > + fse->max_width = DCMIPP_FRAME_MAX_WIDTH;
> > + fse->min_height = DCMIPP_FRAME_MIN_HEIGHT;
> > + fse->max_height = DCMIPP_FRAME_MAX_HEIGHT;
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_par_get_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + fmt->format = *v4l2_subdev_get_pad_format(sd, sd_state, fmt->pad);
> > +
> > + return 0;
> > +}
>
>
> v4l2_subdev_get_fmt() does this for you

Done

>
> > +
> > +static void dcmipp_par_adjust_fmt(struct dcmipp_par_device *par,
> > + struct v4l2_mbus_framefmt *fmt, __u32 pad)
> > +{
> > + const struct dcmipp_par_pix_map *vpix;
> > +
> > + /* Only accept code in the pix map table */
> > + vpix = dcmipp_par_pix_map_by_code(IS_SINK(pad) ? fmt->code : 0,
> > + IS_SRC(pad) ? fmt->code : 0);
> > + if (!vpix)
> > + fmt->code = fmt_default.code;
> > +
> > + /* Exclude JPEG if BT656 bus is selected */
> > + if (vpix && vpix->code_sink == MEDIA_BUS_FMT_JPEG_1X8 &&
> > + par->ved.bus_type == V4L2_MBUS_BT656)
> > + fmt->code = fmt_default.code;
> > +
> > + fmt->width = clamp_t(u32, fmt->width, DCMIPP_FRAME_MIN_WIDTH,
> > + DCMIPP_FRAME_MAX_WIDTH) & ~1;
> > + fmt->height = clamp_t(u32, fmt->height, DCMIPP_FRAME_MIN_HEIGHT,
> > + DCMIPP_FRAME_MAX_HEIGHT) & ~1;
> > +
> > + if (fmt->field == V4L2_FIELD_ANY || fmt->field == V4L2_FIELD_ALTERNATE)
> > + fmt->field = fmt_default.field;
> > +
> > + dcmipp_colorimetry_clamp(fmt);
> > +}
> > +
> > +static int dcmipp_par_set_fmt(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_format *fmt)
> > +{
> > + struct dcmipp_par_device *par = v4l2_get_subdevdata(sd);
> > + struct v4l2_mbus_framefmt *mf;
> > +
> > + if (par->streaming)
> > + return -EBUSY;
> > +
> > + mf = v4l2_subdev_get_pad_format(sd, sd_state, fmt->pad);
> > +
> > + /* Set the new format */
> > + dcmipp_par_adjust_fmt(par, &fmt->format, fmt->pad);
> > +
> > + dev_dbg(par->dev, "%s: format update: old:%dx%d (0x%x, %d, %d, %d, %d) new:%dx%d (0x%x, %d, %d, %d, %d)\n",
> > + par->sd.name,
> > + /* old */
> > + mf->width, mf->height, mf->code,
> > + mf->colorspace, mf->quantization,
> > + mf->xfer_func, mf->ycbcr_enc,
> > + /* new */
> > + fmt->format.width, fmt->format.height, fmt->format.code,
> > + fmt->format.colorspace, fmt->format.quantization,
> > + fmt->format.xfer_func, fmt->format.ycbcr_enc);
> > +
> > + *mf = fmt->format;
> > +
> > + /* When setting the sink format, report that format on the src pad */
> > + if (IS_SINK(fmt->pad)) {
> > + mf = v4l2_subdev_get_pad_format(sd, sd_state, 1);
> > + *mf = fmt->format;
> > + dcmipp_par_adjust_fmt(par, mf, 1);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct v4l2_subdev_pad_ops dcmipp_par_pad_ops = {
> > + .init_cfg = dcmipp_par_init_cfg,
> > + .enum_mbus_code = dcmipp_par_enum_mbus_code,
> > + .enum_frame_size = dcmipp_par_enum_frame_size,
> > + .get_fmt = dcmipp_par_get_fmt,
> > + .set_fmt = dcmipp_par_set_fmt,
> > +};
> > +
> > +static int dcmipp_par_configure(struct dcmipp_par_device *par)
> > +{
> > + u32 val = 0;
> > + const struct dcmipp_par_pix_map *vpix;
> > + struct v4l2_subdev_state *state;
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_mbus_framefmt *src_fmt;
> > +
> > + /* Set vertical synchronization polarity */
> > + if (par->ved.bus.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> > + val |= DCMIPP_PRCR_VSPOL;
> > +
> > + /* Set horizontal synchronization polarity */
> > + if (par->ved.bus.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> > + val |= DCMIPP_PRCR_HSPOL;
> > +
> > + /* Set pixel clock polarity */
> > + if (par->ved.bus.flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> > + val |= DCMIPP_PRCR_PCKPOL;
> > +
> > + /*
> > + * BT656 embedded synchronisation bus mode.
> > + *
> > + * Default SAV/EAV mode is supported here with default codes
> > + * SAV=0xff000080 & EAV=0xff00009d.
> > + * With DCMIPP this means LSC=SAV=0x80 & LEC=EAV=0x9d.
> > + */
> > + if (par->ved.bus_type == V4L2_MBUS_BT656) {
> > + val |= DCMIPP_PRCR_ESS;
> > +
> > + /* Unmask all codes */
> > + reg_write(par, DCMIPP_PRESUR, 0xffffffff);/* FEC:LEC:LSC:FSC */
> > +
> > + /* Trig on LSC=0x80 & LEC=0x9d codes, ignore FSC and FEC */
> > + reg_write(par, DCMIPP_PRESCR, 0xff9d80ff);/* FEC:LEC:LSC:FSC */
> > + }
> > +
> > + /* Set format */
> > + state = v4l2_subdev_lock_and_get_active_state(&par->sd);
> > + sink_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0);
> > + src_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 1);
> > + v4l2_subdev_unlock_state(state);
> > +
> > + vpix = dcmipp_par_pix_map_by_code(sink_fmt->code, src_fmt->code);
> > + if (!vpix) {
> > + dev_err(par->dev, "Invalid sink/src format configuration\n");
> > + return -EINVAL;
> > + }
> > +
> > + val |= vpix->prcr_format << DCMIPP_PRCR_FORMAT_SHIFT;
> > +
> > + /* swap cycles */
> > + if (vpix->prcr_swapcycles)
> > + val |= DCMIPP_PRCR_SWAPCYCLES;
> > +
> > + reg_write(par, DCMIPP_PRCR, val);
> > +
> > + return 0;
> > +}
> > +
> > +static int dcmipp_par_s_stream(struct v4l2_subdev *sd, int enable)
> > +{
> > + struct dcmipp_par_device *par =
> > + container_of(sd, struct dcmipp_par_device, sd);
> > + struct v4l2_subdev *s_subdev;
> > + struct media_pad *pad;
> > + int ret = 0;
> > +
> > + /* Get source subdev */
> > + pad = media_pad_remote_pad_first(&sd->entity.pads[0]);
> > + if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
> > + return -EINVAL;
> > + s_subdev = media_entity_to_v4l2_subdev(pad->entity);
> > +
> > + if (enable) {
> > + ret = dcmipp_par_configure(par);
> > + if (ret)
> > + return ret;
> > +
> > + /* Enable parallel interface */
> > + reg_set(par, DCMIPP_PRCR, DCMIPP_PRCR_ENABLE);
> > +
> > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable);
> > + if (ret < 0) {
> > + dev_err(par->dev,
> > + "failed to start source subdev streaming (%d)\n",
> > + ret);
> > + return ret;
> > + }
> > + } else {
> > + ret = v4l2_subdev_call(s_subdev, video, s_stream, enable);
> > + if (ret < 0) {
> > + dev_err(par->dev,
> > + "failed to stop source subdev streaming (%d)\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + /* Disable parallel interface */
> > + reg_clear(par, DCMIPP_PRCR, DCMIPP_PRCR_ENABLE);
> > + }
> > +
> > + par->streaming = enable;
> > +
> > + return ret;
> > +}
> > +
> > +static const struct v4l2_subdev_video_ops dcmipp_par_video_ops = {
> > + .s_stream = dcmipp_par_s_stream,
> > +};
> > +
> > +static const struct v4l2_subdev_ops dcmipp_par_ops = {
> > + .pad = &dcmipp_par_pad_ops,
> > + .video = &dcmipp_par_video_ops,
> > +};
> > +
> > +static void dcmipp_par_release(struct v4l2_subdev *sd)
> > +{
> > + struct dcmipp_par_device *par =
> > + container_of(sd, struct dcmipp_par_device, sd);
> > +
> > + kfree(par);
> > +}
> > +
> > +static const struct v4l2_subdev_internal_ops dcmipp_par_int_ops = {
> > + .release = dcmipp_par_release,
> > +};
> > +
> > +void dcmipp_par_ent_release(struct dcmipp_ent_device *ved)
> > +{
> > + struct dcmipp_par_device *par =
> > + container_of(ved, struct dcmipp_par_device, ved);
> > +
> > + dcmipp_ent_sd_unregister(ved, &par->sd);
> > +}
> > +
> > +struct dcmipp_ent_device *dcmipp_par_ent_init(struct device *dev,
> > + const char *entity_name,
> > + struct v4l2_device *v4l2_dev,
> > + void __iomem *regs)
> > +{
> > + struct dcmipp_par_device *par;
> > + struct v4l2_subdev_state *state;
> > + struct v4l2_mbus_framefmt *sink_fmt;
> > + struct v4l2_mbus_framefmt *src_fmt;
> > + int ret;
> > +
> > + /* Allocate the par struct */
> > + par = kzalloc(sizeof(*par), GFP_KERNEL);
> > + if (!par)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + par->regs = regs;
> > +
> > + /* Initialize ved and sd */
> > + ret = dcmipp_ent_sd_register(&par->ved, &par->sd, v4l2_dev,
> > + entity_name,
> > + MEDIA_ENT_F_VID_IF_BRIDGE, 2,
> > + (const unsigned long[2]) {
> > + MEDIA_PAD_FL_SINK,
> > + MEDIA_PAD_FL_SOURCE,
> > + },
> > + &dcmipp_par_int_ops, &dcmipp_par_ops,
> > + NULL, NULL);
> > + if (ret) {
> > + kfree(par);
> > + return ERR_PTR(ret);
> > + }
> > +
> > + par->dev = dev;
> > +
> > + /* Initialize the frame format */
> > + state = v4l2_subdev_lock_and_get_active_state(&par->sd);
> > + sink_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0);
> > + src_fmt = v4l2_subdev_get_pad_format(&par->sd, state, 0);
> > + *sink_fmt = fmt_default;
> > + *src_fmt = fmt_default;
> > + v4l2_subdev_unlock_state(state);
>
>
> Should already be done by the call to .init_cfg() within the dcmipp_ent_sd_register() path.

Yes, removed.
>
> > +
> > + return &par->ved;
> > +}

Regards,
Alain