[PATCH v1 00/11] leds: aw200xx: several driver updates

[Dmitry Rokosov]

The following patch series includes several updates for the AW200XX LED
driver:
    - some small fixes and optimizations to the driver implementation:
      delays, autodimming calculation, disable_locking regmap flag,
      display_rows calculation in runtime;
    - fix LED device tree node pattern to accept LED names counting not
      only from 0 to f;
    - support HWEN hardware control, which allows enabling or disabling
      AW200XX RTL logic from the main SoC using a GPIO pin;
    - introduce the new AW20108 LED controller, the datasheet for this
      controller can be found at [1].

Links:
    [1] https://doc.awinic.com/doc/20230609wm/8a9a9ac8-1d8f-4e75-bf7a-67a04465c153.pdf

Dmitry Rokosov (3):
  dt-bindings: leds: aw200xx: fix led dt node pattern
  leds: aw200xx: support HWEN hardware control
  dt-bindings: leds: aw200xx: introduce optional hwen-gpio property

George Stark (7):
  leds: aw200xx: calculate dts property display_rows in driver
  dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  leds: aw200xx: add delay after software reset
  leds: aw200xx: enable disable_locking flag in regmap config
  leds: aw200xx: improve autodim calculation method
  leds: aw200xx: add support for aw20108 device
  dt-bindings: leds: Add binding for AW20108 led driver

Martin Kurbanov (1):
  leds: aw200xx: fix write to DIM parameter

 .../bindings/leds/awinic,aw200xx.yaml         |  42 +++----
 drivers/leds/Kconfig                          |   8 +-
 drivers/leds/leds-aw200xx.c                   | 112 +++++++++++++++---
 3 files changed, 114 insertions(+), 48 deletions(-)

-- 
2.36.0