[PATCH 2/5] watchdog: eiois200_wdt: Add PMC support with eiois200_core.

From: advantech . susiteam
Date: Thu Oct 05 2023 - 10:19:01 EST


From: Wenkai <advantech.susiteam@xxxxxxxxx>

All eiois200 series driver functionalities are based on PMC (Peripheral
Management Controller) communication. This patch enables communication
between the driver and the eiois200_core. However, this version does
not yet implement the watchdog timer's functionality.

Signed-off-by: Wenkai <advantech.susiteam@xxxxxxxxx>
---
drivers/watchdog/eiois200_wdt.c | 114 ++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)

diff --git a/drivers/watchdog/eiois200_wdt.c b/drivers/watchdog/eiois200_wdt.c
index bf132a75a2ec..ce4435ac62f2 100644
--- a/drivers/watchdog/eiois200_wdt.c
+++ b/drivers/watchdog/eiois200_wdt.c
@@ -16,6 +16,40 @@
#define WATCHDOG_TIMEOUT 60
#define WATCHDOG_PRETIMEOUT 10

+/* Support Flags */
+#define SUPPORT_AVAILABLE BIT(0)
+#define SUPPORT_RESET BIT(7)
+
+/* PMC registers */
+#define REG_STATUS 0x00
+#define REG_CONTROL 0x02
+#define REG_EVENT 0x10
+#define REG_RESET_EVENT_TIME 0x14
+#define REG_IRQ_NUMBER 0x17
+
+/* PMC command and control */
+#define CMD_WDT_WRITE 0x2A
+#define CMD_WDT_READ 0x2B
+#define CTRL_STOP 0x00
+#define CTRL_START 0x01
+#define CTRL_TRIGGER 0x02
+
+/* I/O register and its flags */
+#define IOREG_UNLOCK 0x87
+#define IOREG_LOCK 0xAA
+#define IOREG_LDN 0x07
+#define IOREG_LDN_PMCIO 0x0F
+#define IOREG_IRQ 0x70
+#define IOREG_WDT_STATUS 0x30
+
+/* Flags */
+#define FLAG_WDT_ENABLED 0x01
+#define FLAG_TRIGGER_IRQ BIT(4)
+
+/* PMC read and write a value */
+#define PMC_WRITE(cmd, data) pmc(CMD_WDT_WRITE, cmd, data)
+#define PMC_READ(cmd, data) pmc(CMD_WDT_READ, cmd, data)
+
static struct _wdt {
u32 support;
long last_time;
@@ -47,6 +81,48 @@ static int wdt_set_timeout(struct watchdog_device *dev,
return 0;
}

+static int pmc(u8 cmd, u8 ctrl, void *payload)
+{
+ struct pmc_op op = {
+ .cmd = cmd,
+ .control = ctrl,
+ .size = ctrl <= REG_EVENT ? 1 :
+ ctrl >= REG_IRQ_NUMBER ? 1 : 4,
+ .payload = payload,
+ };
+
+ return eiois200_core_pmc_operation(wdt.dev, &op);
+}
+
+static int get_time(u8 ctrl, u32 *val)
+{
+ int ret;
+
+ ret = PMC_READ(ctrl, val);
+
+ /* ms to sec */
+ *val /= 1000;
+
+ return ret;
+}
+
+
+static int wdt_get_config(void)
+{
+ int ret;
+ u32 reset_time;
+
+ /* Get Reset Time */
+ ret = get_time(REG_RESET_EVENT_TIME, &reset_time);
+ if (ret)
+ return ret;
+
+ dev_info(wdt.dev, "Timeout H/W default timeout: %d secs\n", reset_time);
+ wddev.timeout = reset_time;
+
+ return 0;
+}
+
static int wdt_start(struct watchdog_device *dev)
{
return 0;
@@ -67,6 +143,40 @@ static unsigned int wdt_get_timeleft(struct watchdog_device *dev)
return 0;
}

+static int wdt_support(void)
+{
+ u8 support;
+
+ if (PMC_READ(REG_STATUS, &support))
+ return -EIO;
+
+ if ((support & SUPPORT_AVAILABLE) == 0)
+ return -EIO;
+
+ /* Must support reset */
+ if ((support & SUPPORT_RESET) != SUPPORT_RESET)
+ return -EIO;
+
+ /* Must has support event **/
+ wdt.support = support;
+
+ return 0;
+}
+static int wdt_init(struct device *dev)
+{
+ int ret = 0;
+
+ ret = wdt_support();
+ if (ret)
+ return ret;
+
+ ret = wdt_get_config();
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
static const struct watchdog_ops wdt_ops = {
.owner = THIS_MODULE,
.start = wdt_start,
@@ -91,6 +201,10 @@ static int wdt_probe(struct platform_device *pdev)
wdt.iomap = dev_get_regmap(dev->parent, NULL);
if (!wdt.iomap)
return dev_err_probe(dev, -ENOMEM, "Query parent regmap fail\n");
+
+ /* Initialize EC watchdog */
+ if (wdt_init(dev))
+ return dev_err_probe(dev, -EIO, "wdt_init fail\n");

/* Inform watchdog info */
wddev.ops = &wdt_ops;
--
2.34.1