Re: [RFC PATCH net-next] net: phy: aquantia: add firmware load support

[Simon Horman]

On Sat, Sep 30, 2023 at 12:39:44PM +0200, Robert Marko wrote:
> Aquantia PHY-s require firmware to be loaded before they start operating.
> It can be automatically loaded in case when there is a SPI-NOR connected
> to Aquantia PHY-s or can be loaded from the host via MDIO.
> 
> This patch adds support for loading the firmware via MDIO as in most cases
> there is no SPI-NOR being used to save on cost.
> Firmware loading code itself is ported from mainline U-boot with cleanups.
> 
> The firmware has mixed values both in big and little endian.
> PHY core itself is big-endian but it expects values to be in little-endian.
> The firmware is little-endian but CRC-16 value for it is stored at the end
> of firmware in big-endian.
> 
> It seems the PHY does the conversion internally from firmware that is
> little-endian to the PHY that is big-endian on using the mailbox
> but mailbox returns a big-endian CRC-16 to verify the written data
> integrity.
> 
> Co-developed-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>

...

> diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c

...

> @@ -677,6 +735,142 @@ static int aqr107_wait_processor_intensive_op(struct phy_device *phydev)
>  	return 0;
>  }
>  
> +/* load data into the phy's memory */
> +static int aquantia_load_memory(struct phy_device *phydev, u32 addr,
> +				const u8 *data, size_t len)
> +{
> +	u16 crc = 0, up_crc;
> +	size_t pos;
> +
> +	/* PHY expect addr in LE */
> +	addr = cpu_to_le32(addr);

Hi Christian and Robert,


The type of addr us u32, but here it is assigned a __le32 value.

As flagged by Sparse.

> +
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE3,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(addr));
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE4,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(addr));
> +
> +	for (pos = 0; pos < len; pos += min(sizeof(u32), len - pos)) {
> +		u32 word = 0;
> +
> +		memcpy(&word, data + pos, min(sizeof(u32), len - pos));
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE6,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(word));
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE1,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
> +
> +		/* calculate CRC as we load data to the mailbox.
> +		 * We convert word to big-endiang as PHY is BE and ailbox will
> +		 * return a BE crc.
> +		 */
> +		word = cpu_to_be32(word);
> +		crc = crc_ccitt_false(crc, (u8 *)&word, sizeof(word));
> +	}
> +
> +	up_crc = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE2);
> +	if (crc != up_crc) {
> +		phydev_err(phydev, "CRC mismatch: calculated 0x%04x PHY 0x%04x\n",
> +			   crc, up_crc);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static int aqr_fw_boot(struct phy_device *phydev, const u8 *data, size_t size)
> +{
> +	const struct aqr_fw_header *header;
> +	u32 iram_offset = 0, iram_size = 0;
> +	u32 dram_offset = 0, dram_size = 0;
> +	char version[VERSION_STRING_SIZE];
> +	u16 calculated_crc, read_crc;
> +	u32 primary_offset = 0;
> +	int ret;
> +
> +	/* extract saved crc at the end of the fw */
> +	memcpy(&read_crc, data + size - 2, sizeof(read_crc));
> +	/* crc is saved in big-endian as PHY is BE */
> +	read_crc = be16_to_cpu(read_crc);

The type of read_crc is u16.
But be16_to_cpu expects a __be16 argument.

As flagged by Sparse.


> +	calculated_crc = crc_ccitt_false(0, data, size - 2);
> +	if (read_crc != calculated_crc) {
> +		phydev_err(phydev, "bad firmware CRC: file 0x%04x calculated 0x%04x\n",
> +			   read_crc, calculated_crc);
> +		return -EINVAL;
> +	}
> +
> +	/* Get the primary offset to extract DRAM and IRAM sections. */
> +	memcpy(&primary_offset, data + PRIMARY_OFFSET_OFFSET, sizeof(u16));
> +	primary_offset = PRIMARY_OFFSET(le32_to_cpu(primary_offset));

Similarly here.

> +
> +	/* Find the DRAM and IRAM sections within the firmware file. */
> +	header = (struct aqr_fw_header *)(data + primary_offset + HEADER_OFFSET);
> +	memcpy(&iram_offset, &header->iram_offset, sizeof(u8) * 3);
> +	memcpy(&iram_size, &header->iram_size, sizeof(u8) * 3);
> +	memcpy(&dram_offset, &header->dram_offset, sizeof(u8) * 3);
> +	memcpy(&dram_size, &header->dram_size, sizeof(u8) * 3);
> +
> +	/* offset are in LE and values needs to be converted to cpu endian */
> +	iram_offset = le32_to_cpu(iram_offset);
> +	iram_size = le32_to_cpu(iram_size);
> +	dram_offset = le32_to_cpu(dram_offset);
> +	dram_size = le32_to_cpu(dram_size);

And here (x4).

> +
> +	/* Increment the offset with the primary offset. */
> +	iram_offset += primary_offset;
> +	dram_offset += primary_offset;
> +
> +	phydev_dbg(phydev, "primary %d IRAM offset=%d size=%d DRAM offset=%d size=%d\n",
> +		   primary_offset, iram_offset, iram_size, dram_offset, dram_size);
> +
> +	strscpy(version, (char *)data + dram_offset + VERSION_STRING_OFFSET,
> +		VERSION_STRING_SIZE);
> +	phydev_info(phydev, "loading firmware version '%s'\n", version);
> +
> +	/* stall the microcprocessor */
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
> +		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL | VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
> +
> +	phydev_dbg(phydev, "loading DRAM 0x%08x from offset=%d size=%d\n",
> +		   DRAM_BASE_ADDR, dram_offset, dram_size);
> +	ret = aquantia_load_memory(phydev, DRAM_BASE_ADDR, data + dram_offset,
> +				   dram_size);
> +	if (ret)
> +		return ret;
> +
> +	phydev_dbg(phydev, "loading IRAM 0x%08x from offset=%d size=%d\n",
> +		   IRAM_BASE_ADDR, iram_offset, iram_size);
> +	ret = aquantia_load_memory(phydev, IRAM_BASE_ADDR, data + iram_offset,
> +				   iram_size);
> +	if (ret)
> +		return ret;
> +
> +	/* make sure soft reset and low power mode are clear */
> +	phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_SC,
> +			   VEND1_GLOBAL_SC_SOFT_RESET | VEND1_GLOBAL_SC_LOW_POWER);
> +
> +	/* Release the microprocessor. UP_RESET must be held for 100 usec. */
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
> +		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL |
> +		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD |
> +		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_RST);
> +	usleep_range(UP_RESET_SLEEP, UP_RESET_SLEEP * 2);
> +
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_CONTROL2,
> +		      VEND1_GLOBAL_CONTROL2_UP_RUN_STALL_OVD);
> +
> +	return 0;
> +}

...