[PATCH v1 1/1] serial: 8250_bcm7271: Use devm_clk_get_optional_enabled()

From: Andy Shevchenko
Date: Tue Oct 03 2023 - 10:32:05 EST


Use devm_clk_get_optional_enabled() to simplify the code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_bcm7271.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 1a853a08654a..e6d1688feeb4 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1015,26 +1015,22 @@ static int brcmuart_probe(struct platform_device *pdev)
of_property_read_u32(np, "clock-frequency", &clk_rate);

/* See if a Baud clock has been specified */
- baud_mux_clk = devm_clk_get(dev, "sw_baud");
- if (IS_ERR(baud_mux_clk)) {
- if (PTR_ERR(baud_mux_clk) == -EPROBE_DEFER) {
- ret = -EPROBE_DEFER;
- goto release_dma;
- }
- dev_dbg(dev, "BAUD MUX clock not specified\n");
- } else {
+ baud_mux_clk = devm_clk_get_optional_enabled(dev, "sw_baud");
+ if (IS_ERR(baud_mux_clk))
+ goto release_dma;
+ if (baud_mux_clk) {
dev_dbg(dev, "BAUD MUX clock found\n");
- ret = clk_prepare_enable(baud_mux_clk);
- if (ret)
- goto release_dma;
+
priv->baud_mux_clk = baud_mux_clk;
init_real_clk_rates(dev, priv);
clk_rate = priv->default_mux_rate;
+ } else {
+ dev_dbg(dev, "BAUD MUX clock not specified\n");
}

if (clk_rate == 0) {
ret = dev_err_probe(dev, -EINVAL, "clock-frequency or clk not defined\n");
- goto err_clk_disable;
+ goto release_dma;
}

dev_dbg(dev, "DMA is %senabled\n", priv->dma_enabled ? "" : "not ");
@@ -1118,8 +1114,6 @@ static int brcmuart_probe(struct platform_device *pdev)
serial8250_unregister_port(priv->line);
err:
brcmuart_free_bufs(dev, priv);
-err_clk_disable:
- clk_disable_unprepare(baud_mux_clk);
release_dma:
if (priv->dma_enabled)
brcmuart_arbitration(priv, 0);
@@ -1134,7 +1128,6 @@ static int brcmuart_remove(struct platform_device *pdev)
hrtimer_cancel(&priv->hrt);
serial8250_unregister_port(priv->line);
brcmuart_free_bufs(&pdev->dev, priv);
- clk_disable_unprepare(priv->baud_mux_clk);
if (priv->dma_enabled)
brcmuart_arbitration(priv, 0);
return 0;
--
2.40.0.1.gaa8946217a0b