Re: [RFC PATCH net-next] net: phy: aquantia: add firmware load support

[Andrew Lunn]

> +/* load data into the phy's memory */
> +static int aquantia_load_memory(struct phy_device *phydev, u32 addr,
> +				const u8 *data, size_t len)
> +{
> +	u16 crc = 0, up_crc;
> +	size_t pos;
> +
> +	/* PHY expect addr in LE */
> +	addr = cpu_to_le32(addr);
> +
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE1_CRC_RESET);
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE3,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE3_MSW_ADDR(addr));
> +	phy_write_mmd(phydev, MDIO_MMD_VEND1,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE4,
> +		      VEND1_GLOBAL_MAILBOX_INTERFACE4_LSW_ADDR(addr));
> +
> +	for (pos = 0; pos < len; pos += min(sizeof(u32), len - pos)) {
> +		u32 word = 0;
> +
> +		memcpy(&word, data + pos, min(sizeof(u32), len - pos));
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE5,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE5_MSW_DATA(word));
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE6,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE6_LSW_DATA(word));
> +
> +		phy_write_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_MAILBOX_INTERFACE1,
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE1_EXECUTE |
> +			      VEND1_GLOBAL_MAILBOX_INTERFACE1_WRITE);
> +
> +		/* calculate CRC as we load data to the mailbox.
> +		 * We convert word to big-endiang as PHY is BE and ailbox will
> +		 * return a BE crc.

_m_ailbox.

And i would consistently uses CRC in comments.

> +static int aqr_fw_boot(struct phy_device *phydev, const u8 *data, size_t size)
> +{
> +	const struct aqr_fw_header *header;
> +	u32 iram_offset = 0, iram_size = 0;
> +	u32 dram_offset = 0, dram_size = 0;
> +	char version[VERSION_STRING_SIZE];
> +	u16 calculated_crc, read_crc;
> +	u32 primary_offset = 0;
> +	int ret;
> +
> +	/* extract saved crc at the end of the fw */
> +	memcpy(&read_crc, data + size - 2, sizeof(read_crc));
> +	/* crc is saved in big-endian as PHY is BE */
> +	read_crc = be16_to_cpu(read_crc);
> +	calculated_crc = crc_ccitt_false(0, data, size - 2);
> +	if (read_crc != calculated_crc) {
> +		phydev_err(phydev, "bad firmware CRC: file 0x%04x calculated 0x%04x\n",
> +			   read_crc, calculated_crc);
> +		return -EINVAL;
> +	}
> +
> +	/* Get the primary offset to extract DRAM and IRAM sections. */
> +	memcpy(&primary_offset, data + PRIMARY_OFFSET_OFFSET, sizeof(u16));

Please add some sanity checks. We should not fully trust the
firmware. Is PRIMARY_OFFSET_OFFSET + sizeof(u16) actually inside the
firmware blob?

> +	primary_offset = PRIMARY_OFFSET(le32_to_cpu(primary_offset));
> +
> +	/* Find the DRAM and IRAM sections within the firmware file. */
> +	header = (struct aqr_fw_header *)(data + primary_offset + HEADER_OFFSET);

Is header actually inside the firmware blob?

> +	memcpy(&iram_offset, &header->iram_offset, sizeof(u8) * 3);
> +	memcpy(&iram_size, &header->iram_size, sizeof(u8) * 3);
> +	memcpy(&dram_offset, &header->dram_offset, sizeof(u8) * 3);
> +	memcpy(&dram_size, &header->dram_size, sizeof(u8) * 3);
> +
> +	/* offset are in LE and values needs to be converted to cpu endian */
> +	iram_offset = le32_to_cpu(iram_offset);
> +	iram_size = le32_to_cpu(iram_size);
> +	dram_offset = le32_to_cpu(dram_offset);
> +	dram_size = le32_to_cpu(dram_size);
> +
> +	/* Increment the offset with the primary offset. */
> +	iram_offset += primary_offset;
> +	dram_offset += primary_offset;
> +
> +	phydev_dbg(phydev, "primary %d IRAM offset=%d size=%d DRAM offset=%d size=%d\n",
> +		   primary_offset, iram_offset, iram_size, dram_offset, dram_size);
> +
> +	strscpy(version, (char *)data + dram_offset + VERSION_STRING_OFFSET,
> +		VERSION_STRING_SIZE);

Is version inside the blob....

> +static int aqr_firmware_load_nvmem(struct phy_device *phydev)
> +{
> +	struct nvmem_cell *cell;
> +	size_t size;
> +	u8 *buf;
> +	int ret;
> +
> +	cell = nvmem_cell_get(&phydev->mdio.dev, "firmware");

Does this need properties in device tree? Please update the binding.

> +
> +static int aqr_firmware_load_sysfs(struct phy_device *phydev)

_sysfs seems a bit odd here. Does request_firmware still use the user
mode helper? I _thought_ it just went direct to the filesystem?

> +{
> +	struct device *dev = &phydev->mdio.dev;
> +	const struct firmware *fw;
> +	const char *fw_name;
> +	int ret;
> +
> +	ret = of_property_read_string(dev->of_node, "firmware-name",
> +				      &fw_name);

Please update the device tree binding.

> +static int aqr_firmware_load(struct phy_device *phydev)
> +{
> +	int ret;
> +
> +	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, VEND1_GLOBAL_FW_ID);
> +	if (ret > 0)
> +		goto exit;

I assume this means a value of 0 indicates there is no firmware
running? Maybe a comment or a #define for 0?

	 Andrew