Re: [PATCH v2 4/5] clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC

[Konrad Dybcio]

On 9/30/23 15:41, Bryan O'Donoghue wrote:
> Add the sc8280xp CAMCC driver which follows the sdm845 CAMCC lineage
> with additional CCI and IFE blocks and more granular clock parentage.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
[...]

> +static struct clk_branch camcc_gdsc_clk = {
> +	.halt_reg = 0xc1e4,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0xc1e4,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "camcc_gdsc_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&camcc_xo_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
"meh"

Is this clock only necessary for the GDSC to turn on?

I wanted to say "just chuck it into gdsc.cxcs", but upon actually 
reading the code, I realized that just doing so doesn't event turn the 
referenced clocks on.. That's.. a realization.. I think I'll be able to 
solve a couple bugs with this knowledge..



[...]

> +	ret = qcom_cc_really_probe(pdev, &camcc_sc8280xp_desc, regmap);
This conflicts with [1]

> +	if (ret)
> +		goto err_put_rpm;

[...]

> +
> +static int __init camcc_sc8280xp_init(void)
> +{
> +	return platform_driver_register(&camcc_sc8280xp_driver);
> +}
> +subsys_initcall(camcc_sc8280xp_init);
 module_platform_driver, please

Konrad

[1] 
https://lore.kernel.org/linux-arm-msm/20230923112105.18102-4-quic_luoj@xxxxxxxxxxx/