Re: [PATCH v3 01/12] dt-bindings: net: add STM32MP13 compatible in documentation for stm32

From: Krzysztof Kozlowski
Date: Sat Sep 30 2023 - 11:46:19 EST


On 28/09/2023 22:39, Conor Dooley wrote:
> Hey,
>
> On Thu, Sep 28, 2023 at 05:15:01PM +0200, Christophe Roullier wrote:
>> New STM32 SOC have 2 GMACs instances.
>> GMAC IP version is SNPS 4.20.
>>
>> Signed-off-by: Christophe Roullier <christophe.roullier@xxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/net/stm32-dwmac.yaml | 78 +++++++++++++++++--
>> 1 file changed, 70 insertions(+), 8 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> index fc8c96b08d7dc..ca976281bfc22 100644
>> --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml
>> @@ -22,18 +22,17 @@ select:
>> enum:
>> - st,stm32-dwmac
>> - st,stm32mp1-dwmac
>> + - st,stm32mp13-dwmac
>> required:
>> - compatible
>>
>> -allOf:
>> - - $ref: snps,dwmac.yaml#
>> -
>> properties:
>> compatible:
>> oneOf:
>> - items:
>> - enum:
>> - st,stm32mp1-dwmac
>> + - st,stm32mp13-dwmac
>> - const: snps,dwmac-4.20a
>> - items:
>> - enum:
>> @@ -74,13 +73,10 @@ properties:
>>
>> st,syscon:
>> $ref: /schemas/types.yaml#/definitions/phandle-array
>> - items:
>> - - items:
>> - - description: phandle to the syscon node which encompases the glue register
>> - - description: offset of the control register
>> description:
>> Should be phandle/offset pair. The phandle to the syscon node which
>> - encompases the glue register, and the offset of the control register
>> + encompases the glue register, the offset of the control register and
>> + the mask to set bitfield in control register
>>
>> st,eth-clk-sel:
>> description:
>> @@ -101,6 +97,38 @@ required:
>>
>> unevaluatedProperties: false
>>
>> +allOf:
>> + - $ref: snps,dwmac.yaml#
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + enum:
>> + - st,stm32mp1-dwmac
>> + - st,stm32-dwmac
>> + then:
>> + properties:
>> + st,syscon:
>> + items:
>> + items:
>> + - description: phandle to the syscon node which encompases the glue register
>> + - description: offset of the control register
>
> These descriptions should, IMO, be moved back out to the st,syscon
> definition. If you put the 3 descriptions there, with "minItems: 2" &
> put "maxItems: 2" and "minItems: 3" in each of the if/then clauses.
> Also, it should be sufficient to simplify to if/then/else.

What's more, same property should not have different types. This syscon
property was way too generic, thus now you have trouble of conflicting
types.

Best regards,
Krzysztof