[PATCH 1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices

[Matthias Schiffer]

Describes the hardware better, and avoids a few warnings during boot:

    lm75 0-004a: supply vs not found, using dummy regulator
    at24 0-0050: supply vcc not found, using dummy regulator
    at24 0-0054: supply vcc not found, using dummy regulator

Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 6229849b5d968..d82d4a98306a7 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -85,6 +85,15 @@ rtos_ipc_memory_region: ipc-memories@a5000000 {
 			no-map;
 		};
 	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &main_i2c0 {
@@ -96,11 +105,13 @@ &main_i2c0 {
 	tmp1075: temperature-sensor@4a {
 		compatible = "ti,tmp1075";
 		reg = <0x4a>;
+		vs-supply = <&reg_1v8>;
 	};
 
 	eeprom0: eeprom@50 {
 		compatible = "st,24c02", "atmel,24c02";
 		reg = <0x50>;
+		vcc-supply = <&reg_1v8>;
 		pagesize = <16>;
 		read-only;
 	};
@@ -114,6 +125,7 @@ pcf85063: rtc@51 {
 	eeprom1: eeprom@54 {
 		compatible = "st,24c64", "atmel,24c64";
 		reg = <0x54>;
+		vcc-supply = <&reg_1v8>;
 		pagesize = <32>;
 	};
 };
-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/