Re: Ryzen 9 7950x sound module does not not build

From: Randy Dunlap
Date: Wed Sep 27 2023 - 11:50:14 EST




On 9/27/23 04:27, Sid Boyce wrote:
> On 26/09/2023 23:13, Randy Dunlap wrote:

|| The snd-rpl-pci-acp6x driver only supports
|| vendor=0x1022, device=0x15e2, and PCI revision=0x62.

>> lspci -vv
>
>
> 01:00.1 Audiodevice: NVIDIA Corporation Device 10fa (rev a1)
>        Subsystem: NVIDIA Corporation Device 1f82
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin B routed to IRQ 80
>        IOMMU group: 11
>        Region 0: Memory at fc080000 (32-bit, non-prefetchable) [size=16K]
>        Capabilities: [60] Power Management version 3
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [78] Express (v2) Endpoint, MSI 00
>                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
>                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75W
>                DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
>                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 256 bytes, MaxReadReq 512 bytes
>                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend-
>                LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
>                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 2.5GT/s (downgraded), Width x16
>                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
>                         10BitTagComp- 10BitTagReq- OBFF Via message, ExtFmt- EETLPPrefix-
>                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>                         FRS- TPHComp- ExtTPHComp-
>                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
>                         AtomicOpsCtl: ReqEn-
>                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>                         Retimer- 2Retimers- CrosslinkRes: unsupported
>        Capabilities: [100 v2] Advanced Error Reporting
>                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
>                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
>                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
>                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>                HeaderLog: 00000000 00000000 00000000 00000000
>        Kernel driver in use: snd_hda_intel
>        Kernel modules: snd_hda_intel
>
> 0b:00.6 Audiodevice: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD AudioController
>        DeviceName: Realtek ALC897 Audio
>        Subsystem: ASUSTeK Computer Inc. Device 87fb
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>        Latency: 0, Cache Line Size: 64 bytes
>        Interrupt: pin C routed to IRQ 81
>        IOMMU group: 24
>        Region 0: Memory at fc500000 (32-bit, non-prefetchable) [size=32K]
>        Capabilities: [48] Vendor Specific Information: Len=08 <?>
>        Capabilities: [50] Power Management version 3
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [64] Express (v2) Endpoint, MSI 00
>                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
>                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
>                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>                        MaxPayload 256 bytes, MaxReadReq 512 bytes
>                DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
>                LnkCap: Port #0, Speed 16GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
>                LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
>                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                LnkSta: Speed 16GT/s, Width x16
>                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR-
>                         10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix+, MaxEETLPPrefixes 1
>                         EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
>                         FRS- TPHComp- ExtTPHComp-
>                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
>                         AtomicOpsCtl: ReqEn-
>                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
>                         EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
>                         Retimer- 2Retimers- CrosslinkRes: unsupported
>        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                Address: 00000000fee00000  Data: 0000
>        Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>        Capabilities: [2a0 v1] Access Control Services
>                ACSCap: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>                ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>        Kernel driver in use: snd_hda_intel
>        Kernel modules: snd_hda_intel
>

Sid, do you have some reason to believe that one of these devices should use the
snd-rpl-pci-acp6x driver? I don't see that either one of them is the correct
vendor/device ID pair for that driver, but I would prefer that someone who is
familiar with the driver & device jump in here...

--
~Randy