Re: [PATCH V3 3/4] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 IDP board

[Konrad Dybcio]

On 27.09.2023 10:18, Nitin Rawat wrote:
> Add UFS host controller and PHY nodes for sc7280 IDP board.
> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 2ff549f4dc7a..a0059527d9e4 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -499,6 +499,25 @@
>  	status = "okay";
>  };
> 
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
> +	vcc-supply = <&vreg_l7b_2p9>;
> +	vcc-max-microamp = <800000>;
> +	vccq-supply = <&vreg_l9b_1p2>;
> +	vccq-max-microamp = <900000>;
> +	vccq2-supply = <&vreg_l9b_1p2>;
> +	vccq2-max-microamp = <900000>;
Were you able to confirm it's correct (see the q in [1])

Konrad

[1] https://lore.kernel.org/linux-arm-msm/20230926162042.14180-1-quic_nitirawa@xxxxxxxxxxx/T/#m72ca82a9145af380ffd37415455d6ef3d4195795