[PATCH] mmc: meson-gx: Remove setting of CMD_CFG_ERROR

[Rong.Chen]

From: Rong Chen <rong.chen@xxxxxxxxxxx>

Setting bit CMD_CFG_ERROR has non effects on previous controllers.
However, it will cause an IRQ and stop working on latest controllers,
This bit is used for selecting SG LINK of data address.
Don't set the bit CMD_CFG_ERROR anymore to resolve this issuse.

Therefore, remove this setting.

Signed-off-by: Rong Chen <rong.chen@xxxxxxxxxxx>
---
 drivers/mmc/host/meson-gx-mmc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 9837dab096e6..c7c067b9415a 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -801,7 +801,6 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
 
 	cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
 	cmd_cfg |= CMD_CFG_OWNER;  /* owned by CPU */
-	cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
 
 	meson_mmc_set_response_bits(cmd, &cmd_cfg);
 
-- 
2.42.0