Re: [RFC PATCH 25/25] perf pmu-events: Add event counter data for Tigerlake

From: Liang, Kan
Date: Tue Sep 26 2023 - 12:41:55 EST

Next message: Alexander Aring: "Re: [PATCH] [v2] ieee802154: ca8210: Fix a potential UAF in ca8210_probe"
Previous message: Paolo Bonzini: "Re: [PATCH v2 3/4] KVM: x86: add more information to kvm_exit tracepoint"
In reply to: weilin . wang: "[RFC PATCH 25/25] perf pmu-events: Add event counter data for Tigerlake"
Next in thread: Ian Rogers: "Re: [RFC PATCH 00/25] Perf stat metric grouping with hardware information"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 2023-09-25 2:18 a.m., weilin.wang@xxxxxxxxx wrote:
> From: Weilin Wang <weilin.wang@xxxxxxxxx>
>
> The added new fields are required in this new grouping method. Currently,
> the format of added fields are temporary for experiments.
>
> This platform is not tested yet.

Please does sanity test before posting the patch. I think it's better to
add a test case in the perf test for the new option.

Thanks,
Kan

>
> Signed-off-by: Weilin Wang <weilin.wang@xxxxxxxxx>
> ---
> .../pmu-events/arch/x86/tigerlake/cache.json | 65 +++++++++++++
> .../arch/x86/tigerlake/counter.json | 7 ++
> .../arch/x86/tigerlake/floating-point.json | 13 +++
> .../arch/x86/tigerlake/frontend.json | 56 +++++++++++
> .../pmu-events/arch/x86/tigerlake/memory.json | 31 ++++++
> .../pmu-events/arch/x86/tigerlake/other.json | 4 +
> .../arch/x86/tigerlake/pipeline.json | 96 +++++++++++++++++++
> .../x86/tigerlake/uncore-interconnect.json | 11 +++
> .../arch/x86/tigerlake/uncore-memory.json | 6 ++
> .../arch/x86/tigerlake/uncore-other.json | 1 +
> .../arch/x86/tigerlake/virtual-memory.json | 20 ++++
> 11 files changed, 310 insertions(+)
> create mode 100644 tools/perf/pmu-events/arch/x86/tigerlake/counter.json
>
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/cache.json b/tools/perf/pmu-events/arch/x86/tigerlake/cache.json
> index c54fb65d3..1b50e92d7 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/cache.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/cache.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Counts the number of cache lines replaced in L1 data cache.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x51",
> "EventName": "L1D.REPLACEMENT",
> "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x48",
> "EventName": "L1D_PEND_MISS.FB_FULL",
> "PublicDescription": "Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailability.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0x48",
> @@ -27,6 +30,7 @@
> },
> {
> "BriefDescription": "Number of cycles a demand request has waited due to L1D due to lack of L2 resources.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x48",
> "EventName": "L1D_PEND_MISS.L2_STALL",
> "PublicDescription": "Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.",
> @@ -35,6 +39,7 @@
> },
> {
> "BriefDescription": "Number of L1D misses that are outstanding",
> + "Counter": "0,1,2,3",
> "EventCode": "0x48",
> "EventName": "L1D_PEND_MISS.PENDING",
> "PublicDescription": "Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
> @@ -43,6 +48,7 @@
> },
> {
> "BriefDescription": "Cycles with L1D load Misses outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x48",
> "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
> @@ -52,6 +58,7 @@
> },
> {
> "BriefDescription": "L2 cache lines filling L2",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf1",
> "EventName": "L2_LINES_IN.ALL",
> "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
> @@ -60,6 +67,7 @@
> },
> {
> "BriefDescription": "Modified cache lines that are evicted by L2 cache when triggered by an L2 cache fill.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf2",
> "EventName": "L2_LINES_OUT.NON_SILENT",
> "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3",
> @@ -68,6 +76,7 @@
> },
> {
> "BriefDescription": "Non-modified cache lines that are silently dropped by L2 cache when triggered by an L2 cache fill.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf2",
> "EventName": "L2_LINES_OUT.SILENT",
> "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.",
> @@ -76,6 +85,7 @@
> },
> {
> "BriefDescription": "L2 code requests",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.ALL_CODE_RD",
> "PublicDescription": "Counts the total number of L2 code requests.",
> @@ -84,6 +94,7 @@
> },
> {
> "BriefDescription": "Demand Data Read access L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
> "PublicDescription": "Counts Demand Data Read requests accessing the L2 cache. These requests may hit or miss L2 cache. True-miss exclude misses that were merged with ongoing L2 misses. An access is counted once.",
> @@ -92,6 +103,7 @@
> },
> {
> "BriefDescription": "RFO requests to L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.ALL_RFO",
> "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
> @@ -100,6 +112,7 @@
> },
> {
> "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.CODE_RD_HIT",
> "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
> @@ -108,6 +121,7 @@
> },
> {
> "BriefDescription": "L2 cache misses when fetching instructions",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.CODE_RD_MISS",
> "PublicDescription": "Counts L2 cache misses when fetching instructions.",
> @@ -116,6 +130,7 @@
> },
> {
> "BriefDescription": "Demand Data Read requests that hit L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
> "PublicDescription": "Counts the number of demand Data Read requests initiated by load instructions that hit L2 cache.",
> @@ -124,6 +139,7 @@
> },
> {
> "BriefDescription": "Demand Data Read miss L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
> "PublicDescription": "Counts demand Data Read requests with true-miss in the L2 cache. True-miss excludes misses that were merged with ongoing L2 misses. An access is counted once.",
> @@ -132,6 +148,7 @@
> },
> {
> "BriefDescription": "Read requests with true-miss in L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.MISS",
> "PublicDescription": "Counts read requests of any type with true-miss in the L2 cache. True-miss excludes L2 misses that were merged with ongoing L2 misses.",
> @@ -140,6 +157,7 @@
> },
> {
> "BriefDescription": "All accesses to L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.REFERENCES",
> "PublicDescription": "Counts all requests that were hit or true misses in L2 cache. True-miss excludes misses that were merged with ongoing L2 misses.",
> @@ -148,6 +166,7 @@
> },
> {
> "BriefDescription": "RFO requests that hit L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.RFO_HIT",
> "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
> @@ -156,6 +175,7 @@
> },
> {
> "BriefDescription": "RFO requests that miss L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.RFO_MISS",
> "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
> @@ -164,6 +184,7 @@
> },
> {
> "BriefDescription": "SW prefetch requests that hit L2 cache.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.SWPF_HIT",
> "PublicDescription": "Counts Software prefetch requests that hit the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.",
> @@ -172,6 +193,7 @@
> },
> {
> "BriefDescription": "SW prefetch requests that miss L2 cache.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x24",
> "EventName": "L2_RQSTS.SWPF_MISS",
> "PublicDescription": "Counts Software prefetch requests that miss the L2 cache. Accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions when FB is not full.",
> @@ -180,6 +202,7 @@
> },
> {
> "BriefDescription": "L2 writebacks that access L2 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf0",
> "EventName": "L2_TRANS.L2_WB",
> "PublicDescription": "Counts L2 writebacks that access L2 cache.",
> @@ -188,6 +211,7 @@
> },
> {
> "BriefDescription": "Cycles when L1D is locked",
> + "Counter": "0,1,2,3",
> "EventCode": "0x63",
> "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION",
> "PublicDescription": "This event counts the number of cycles when the L1D is locked. It is a superset of the 0x1 mask (BUS_LOCK_CLOCKS.BUS_LOCK_DURATION).",
> @@ -196,6 +220,7 @@
> },
> {
> "BriefDescription": "Core-originated cacheable requests that missed L3 (Except hardware prefetches to the L3)",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x2e",
> "EventName": "LONGEST_LAT_CACHE.MISS",
> "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches to the L1 and L2. It does not include hardware prefetches to the L3, and may not count other types of requests to the L3.",
> @@ -204,6 +229,7 @@
> },
> {
> "BriefDescription": "Retired load instructions.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.ALL_LOADS",
> @@ -214,6 +240,7 @@
> },
> {
> "BriefDescription": "Retired store instructions.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.ALL_STORES",
> @@ -224,6 +251,7 @@
> },
> {
> "BriefDescription": "All retired memory instructions.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.ANY",
> @@ -234,6 +262,7 @@
> },
> {
> "BriefDescription": "Retired load instructions with locked access.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
> @@ -244,6 +273,7 @@
> },
> {
> "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
> @@ -254,6 +284,7 @@
> },
> {
> "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
> @@ -264,6 +295,7 @@
> },
> {
> "BriefDescription": "Retired load instructions that miss the STLB.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
> @@ -274,6 +306,7 @@
> },
> {
> "BriefDescription": "Retired store instructions that miss the STLB.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd0",
> "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
> @@ -284,6 +317,7 @@
> },
> {
> "BriefDescription": "Snoop hit a modified(HITM) or clean line(HIT_W_FWD) in another on-pkg core which forwarded the data back due to a retired load instruction.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd2",
> "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_FWD",
> @@ -294,6 +328,7 @@
> },
> {
> "BriefDescription": "Retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd2",
> "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
> @@ -304,6 +339,7 @@
> },
> {
> "BriefDescription": "Retired load instructions whose data sources were hits in L3 without snoops required",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd2",
> "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
> @@ -314,6 +350,7 @@
> },
> {
> "BriefDescription": "Snoop hit without forwarding in another on-pkg core due to a retired load instruction, data was supplied by the L3.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd2",
> "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NO_FWD",
> @@ -324,6 +361,7 @@
> },
> {
> "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd4",
> "EventName": "MEM_LOAD_MISC_RETIRED.UC",
> @@ -334,6 +372,7 @@
> },
> {
> "BriefDescription": "Number of completed demand load requests that missed the L1, but hit the FB(fill buffer), because a preceding miss to the same cacheline initiated the line to be brought into L1, but data is not yet ready in L1.",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.FB_HIT",
> @@ -344,6 +383,7 @@
> },
> {
> "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L1_HIT",
> @@ -354,6 +394,7 @@
> },
> {
> "BriefDescription": "Retired load instructions missed L1 cache as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L1_MISS",
> @@ -364,6 +405,7 @@
> },
> {
> "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L2_HIT",
> @@ -374,6 +416,7 @@
> },
> {
> "BriefDescription": "Retired load instructions missed L2 cache as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L2_MISS",
> @@ -384,6 +427,7 @@
> },
> {
> "BriefDescription": "Retired load instructions with L3 cache hits as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L3_HIT",
> @@ -394,6 +438,7 @@
> },
> {
> "BriefDescription": "Retired load instructions missed L3 cache as data sources",
> + "Counter": "0,1,2,3",
> "Data_LA": "1",
> "EventCode": "0xd1",
> "EventName": "MEM_LOAD_RETIRED.L3_MISS",
> @@ -404,6 +449,7 @@
> },
> {
> "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xB7, 0xBB",
> "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -413,6 +459,7 @@
> },
> {
> "BriefDescription": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
> + "Counter": "0,1,2,3",
> "EventCode": "0xB7, 0xBB",
> "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -422,6 +469,7 @@
> },
> {
> "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xB7, 0xBB",
> "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM",
> "MSRIndex": "0x1a6,0x1a7",
> @@ -431,6 +479,7 @@
> },
> {
> "BriefDescription": "Demand and prefetch data reads",
> + "Counter": "0,1,2,3",
> "EventCode": "0xb0",
> "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
> "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
> @@ -439,6 +488,7 @@
> },
> {
> "BriefDescription": "Any memory transaction that reached the SQ.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xb0",
> "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
> "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
> @@ -447,6 +497,7 @@
> },
> {
> "BriefDescription": "Demand Data Read requests sent to uncore",
> + "Counter": "0,1,2,3",
> "EventCode": "0xb0",
> "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
> "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
> @@ -455,6 +506,7 @@
> },
> {
> "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
> + "Counter": "0,1,2,3",
> "EventCode": "0xb0",
> "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
> "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
> @@ -463,6 +515,7 @@
> },
> {
> "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
> + "Counter": "0,1,2,3",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
> "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
> @@ -471,6 +524,7 @@
> },
> {
> "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
> @@ -480,6 +534,7 @@
> },
> {
> "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
> @@ -489,6 +544,7 @@
> },
> {
> "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
> @@ -498,6 +554,7 @@
> },
> {
> "BriefDescription": "Demand Data Read transactions pending for off-core. Highly correlated.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
> "PublicDescription": "Counts the number of off-core outstanding Demand Data Read transactions every cycle. A transaction is considered to be in the Off-core outstanding state between L2 cache miss and data-return to the core.",
> @@ -506,6 +563,7 @@
> },
> {
> "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
> + "Counter": "0,1,2,3",
> "CounterMask": "6",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
> @@ -514,6 +572,7 @@
> },
> {
> "BriefDescription": "Store Read transactions pending for off-core. Highly correlated.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x60",
> "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
> "PublicDescription": "Counts the number of off-core outstanding read-for-ownership (RFO) store transactions every cycle. An RFO transaction is considered to be in the Off-core outstanding state between L2 cache miss and transaction completion.",
> @@ -522,6 +581,7 @@
> },
> {
> "BriefDescription": "Counts bus locks, accounts for cache line split locks and UC locks.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf4",
> "EventName": "SQ_MISC.BUS_LOCK",
> "PublicDescription": "Counts the more expensive bus lock needed to enforce cache coherency for certain memory accesses that need to be done atomically. Can be created by issuing an atomic instruction (via the LOCK prefix) which causes a cache line split or accesses uncacheable memory.",
> @@ -530,6 +590,7 @@
> },
> {
> "BriefDescription": "Cycles the superQ cannot take any more entries.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xf4",
> "EventName": "SQ_MISC.SQ_FULL",
> "PublicDescription": "Counts the cycles for which the thread is active and the superQ cannot take any more entries.",
> @@ -538,6 +599,7 @@
> },
> {
> "BriefDescription": "Number of PREFETCHNTA instructions executed.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x32",
> "EventName": "SW_PREFETCH_ACCESS.NTA",
> "PublicDescription": "Counts the number of PREFETCHNTA instructions executed.",
> @@ -546,6 +608,7 @@
> },
> {
> "BriefDescription": "Number of PREFETCHW instructions executed.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x32",
> "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
> "PublicDescription": "Counts the number of PREFETCHW instructions executed.",
> @@ -554,6 +617,7 @@
> },
> {
> "BriefDescription": "Number of PREFETCHT0 instructions executed.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x32",
> "EventName": "SW_PREFETCH_ACCESS.T0",
> "PublicDescription": "Counts the number of PREFETCHT0 instructions executed.",
> @@ -562,6 +626,7 @@
> },
> {
> "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x32",
> "EventName": "SW_PREFETCH_ACCESS.T1_T2",
> "PublicDescription": "Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/counter.json b/tools/perf/pmu-events/arch/x86/tigerlake/counter.json
> new file mode 100644
> index 000000000..98fdc5892
> --- /dev/null
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/counter.json
> @@ -0,0 +1,7 @@
> +[
> + {
> + "Unit": "Core",
> + "Size": "8",
> + "FixedSize": "4"
> + }
> +]
> \ No newline at end of file
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json b/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json
> index 63b5b56d1..0b04972d0 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Counts all microcode FP assists.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc1",
> "EventName": "ASSISTS.FP",
> "PublicDescription": "Counts all microcode Floating Point assists.",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
> "PublicDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
> "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -25,6 +28,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
> "PublicDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 4 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -33,6 +37,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
> "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -41,6 +46,7 @@
> },
> {
> "BriefDescription": "Number of SSE/AVX computational 128-bit packed single and 256-bit packed double precision FP instructions retired; some instructions will count twice as noted below. Each count represents 2 or/and 4 computation operations, 1 for each element. Applies to SSE* and AVX* packed single precision and packed double precision FP instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.4_FLOPS",
> "PublicDescription": "Number of SSE/AVX computational 128-bit packed single precision and 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 2 or/and 4 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point and packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -49,6 +55,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
> "PublicDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -57,6 +64,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
> "PublicDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 16 computation operations, one for each element. Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -65,6 +73,7 @@
> },
> {
> "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision and 512-bit packed double precision FP instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, 1 for each element. Applies to SSE* and AVX* packed single precision and double precision FP instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RSQRT14 RCP RCP14 DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.8_FLOPS",
> "PublicDescription": "Number of SSE/AVX computational 256-bit packed single precision and 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 8 computation operations, one for each element. Applies to SSE* and AVX* packed single precision and double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RSQRT14 RCP RCP14 DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -73,6 +82,7 @@
> },
> {
> "BriefDescription": "Number of SSE/AVX computational scalar floating-point instructions retired; some instructions will count twice as noted below. Applies to SSE* and AVX* scalar, double and single precision floating-point: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 RANGE SQRT DPP FM(N)ADD/SUB. DPP and FM(N)ADD/SUB instructions count twice as they perform multiple calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.SCALAR",
> "PublicDescription": "Number of SSE/AVX computational scalar single precision and double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -81,6 +91,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
> "PublicDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -89,6 +100,7 @@
> },
> {
> "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
> "PublicDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below. Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element. The DAZ and FTZ flags in the MXCSR register need to be set when using these events.",
> @@ -97,6 +109,7 @@
> },
> {
> "BriefDescription": "Number of any Vector retired FP arithmetic instructions",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc7",
> "EventName": "FP_ARITH_INST_RETIRED.VECTOR",
> "SampleAfterValue": "1000003",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json b/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json
> index d7b972452..bba638c5e 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xe6",
> "EventName": "BACLEARS.ANY",
> "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Stalls caused by changing prefix length of the instruction. [This event is alias to ILD_STALL.LCP]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x87",
> "EventName": "DECODE.LCP",
> "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk. [This event is alias to ILD_STALL.LCP]",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE transitions count.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0xab",
> @@ -27,6 +30,7 @@
> },
> {
> "BriefDescription": "DSB-to-MITE switch true penalty cycles.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xab",
> "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
> "PublicDescription": "Decode Stream Buffer (DSB) is a Uop-cache that holds translations of previously fetched instructions that were decoded by the legacy x86 decode pipeline (MITE). This event counts fetch penalty cycles when a transition occurs from DSB to MITE.",
> @@ -35,6 +39,7 @@
> },
> {
> "BriefDescription": "Retired Instructions who experienced DSB miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.ANY_DSB_MISS",
> "MSRIndex": "0x3F7",
> @@ -42,10 +47,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired Instructions who experienced a critical DSB miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.DSB_MISS",
> "MSRIndex": "0x3F7",
> @@ -53,10 +60,12 @@
> "PEBS": "1",
> "PublicDescription": "Number of retired Instructions that experienced a critical DSB (Decode stream buffer i.e. the decoded instruction-cache) miss. Critical means stalls were exposed to the back-end as a result of the DSB miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.ITLB_MISS",
> "MSRIndex": "0x3F7",
> @@ -64,10 +73,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.L1I_MISS",
> "MSRIndex": "0x3F7",
> @@ -75,10 +86,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired Instructions who experienced Instruction L1 Cache true miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.L2_MISS",
> "MSRIndex": "0x3F7",
> @@ -86,10 +99,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired Instructions who experienced Instruction L2 Cache true miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
> "MSRIndex": "0x3F7",
> @@ -97,10 +112,12 @@
> "PEBS": "1",
> "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
> "MSRIndex": "0x3F7",
> @@ -108,10 +125,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
> "MSRIndex": "0x3F7",
> @@ -119,10 +138,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions after front-end starvation of at least 2 cycles",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_2",
> "MSRIndex": "0x3F7",
> @@ -130,10 +151,12 @@
> "PEBS": "1",
> "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 2 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
> "MSRIndex": "0x3F7",
> @@ -141,10 +164,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
> "MSRIndex": "0x3F7",
> @@ -152,10 +177,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
> "MSRIndex": "0x3F7",
> @@ -163,10 +190,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
> "MSRIndex": "0x3F7",
> @@ -174,10 +203,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
> "MSRIndex": "0x3F7",
> @@ -185,10 +216,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_64",
> "MSRIndex": "0x3F7",
> @@ -196,10 +229,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
> "MSRIndex": "0x3F7",
> @@ -207,10 +242,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc6",
> "EventName": "FRONTEND_RETIRED.STLB_MISS",
> "MSRIndex": "0x3F7",
> @@ -218,10 +255,12 @@
> "PEBS": "1",
> "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss. [This event is alias to ICACHE_DATA.STALLS]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x80",
> "EventName": "ICACHE_16B.IFDATA_STALL",
> "PublicDescription": "Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity. [This event is alias to ICACHE_DATA.STALLS]",
> @@ -230,6 +269,7 @@
> },
> {
> "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x83",
> "EventName": "ICACHE_64B.IFTAG_HIT",
> "PublicDescription": "Counts instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.",
> @@ -238,6 +278,7 @@
> },
> {
> "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x83",
> "EventName": "ICACHE_64B.IFTAG_MISS",
> "PublicDescription": "Counts instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.",
> @@ -246,6 +287,7 @@
> },
> {
> "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss. [This event is alias to ICACHE_TAG.STALLS]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x83",
> "EventName": "ICACHE_64B.IFTAG_STALL",
> "PublicDescription": "Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss. [This event is alias to ICACHE_TAG.STALLS]",
> @@ -254,6 +296,7 @@
> },
> {
> "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss. [This event is alias to ICACHE_16B.IFDATA_STALL]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x80",
> "EventName": "ICACHE_DATA.STALLS",
> "PublicDescription": "Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity. [This event is alias to ICACHE_16B.IFDATA_STALL]",
> @@ -262,6 +305,7 @@
> },
> {
> "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss. [This event is alias to ICACHE_64B.IFTAG_STALL]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x83",
> "EventName": "ICACHE_TAG.STALLS",
> "PublicDescription": "Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss. [This event is alias to ICACHE_64B.IFTAG_STALL]",
> @@ -270,6 +314,7 @@
> },
> {
> "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x79",
> "EventName": "IDQ.DSB_CYCLES_ANY",
> @@ -279,6 +324,7 @@
> },
> {
> "BriefDescription": "Cycles DSB is delivering optimal number of Uops",
> + "Counter": "0,1,2,3",
> "CounterMask": "5",
> "EventCode": "0x79",
> "EventName": "IDQ.DSB_CYCLES_OK",
> @@ -288,6 +334,7 @@
> },
> {
> "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
> + "Counter": "0,1,2,3",
> "EventCode": "0x79",
> "EventName": "IDQ.DSB_UOPS",
> "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.",
> @@ -296,6 +343,7 @@
> },
> {
> "BriefDescription": "Cycles MITE is delivering any Uop",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x79",
> "EventName": "IDQ.MITE_CYCLES_ANY",
> @@ -305,6 +353,7 @@
> },
> {
> "BriefDescription": "Cycles MITE is delivering optimal number of Uops",
> + "Counter": "0,1,2,3",
> "CounterMask": "5",
> "EventCode": "0x79",
> "EventName": "IDQ.MITE_CYCLES_OK",
> @@ -314,6 +363,7 @@
> },
> {
> "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
> + "Counter": "0,1,2,3",
> "EventCode": "0x79",
> "EventName": "IDQ.MITE_UOPS",
> "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
> @@ -322,6 +372,7 @@
> },
> {
> "BriefDescription": "Cycles when uops are being delivered to IDQ while MS is busy",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x79",
> "EventName": "IDQ.MS_CYCLES_ANY",
> @@ -331,6 +382,7 @@
> },
> {
> "BriefDescription": "Number of switches from DSB or MITE to the MS",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0x79",
> @@ -341,6 +393,7 @@
> },
> {
> "BriefDescription": "Uops delivered to IDQ while MS is busy",
> + "Counter": "0,1,2,3",
> "EventCode": "0x79",
> "EventName": "IDQ.MS_UOPS",
> "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
> @@ -349,6 +402,7 @@
> },
> {
> "BriefDescription": "Uops not delivered by IDQ when backend of the machine is not stalled",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x9c",
> "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
> "PublicDescription": "Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.",
> @@ -357,6 +411,7 @@
> },
> {
> "BriefDescription": "Cycles when no uops are not delivered by the IDQ when backend of the machine is not stalled",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "5",
> "EventCode": "0x9c",
> "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
> @@ -366,6 +421,7 @@
> },
> {
> "BriefDescription": "Cycles when optimal number of uops was delivered to the back-end when the back-end is not stalled",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0x9c",
> "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/memory.json b/tools/perf/pmu-events/arch/x86/tigerlake/memory.json
> index 8848fcbcc..b8ef8abb3 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/memory.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/memory.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "6",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Number of machine clears due to memory ordering conflicts.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc3",
> "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
> "PublicDescription": "Counts the number of Machine Clears detected dye to memory ordering. Memory Ordering Machine Clears may apply when a memory read may not conform to the memory ordering rules of the x86 architecture",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
> @@ -25,10 +28,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "1009",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
> @@ -37,10 +42,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "20011",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
> @@ -49,10 +56,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "503",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
> @@ -61,10 +70,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "100007",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
> @@ -73,10 +84,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "100003",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
> @@ -85,10 +98,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "101",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
> @@ -97,10 +112,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "2003",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "Data_LA": "1",
> "EventCode": "0xcd",
> "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
> @@ -109,10 +126,12 @@
> "PEBS": "2",
> "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.",
> "SampleAfterValue": "50021",
> + "TakenAlone": "1",
> "UMask": "0x1"
> },
> {
> "BriefDescription": "Demand Data Read requests who miss L3 cache",
> + "Counter": "0,1,2,3",
> "EventCode": "0xb0",
> "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
> "PublicDescription": "Demand Data Read requests who miss L3 cache.",
> @@ -121,6 +140,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution aborted.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.ABORTED",
> "PublicDescription": "Counts the number of times RTM abort was triggered.",
> @@ -129,6 +149,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.ABORTED_EVENTS",
> "PublicDescription": "Counts the number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).",
> @@ -137,6 +158,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.ABORTED_MEM",
> "PublicDescription": "Counts the number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
> @@ -145,6 +167,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
> "PublicDescription": "Counts the number of times an RTM execution aborted due to incompatible memory type.",
> @@ -153,6 +176,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
> "PublicDescription": "Counts the number of times an RTM execution aborted due to HLE-unfriendly instructions.",
> @@ -161,6 +185,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution successfully committed",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.COMMIT",
> "PublicDescription": "Counts the number of times RTM commit succeeded.",
> @@ -169,6 +194,7 @@
> },
> {
> "BriefDescription": "Number of times an RTM execution started.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc9",
> "EventName": "RTM_RETIRED.START",
> "PublicDescription": "Counts the number of times we entered an RTM region. Does not count nested transactions.",
> @@ -177,6 +203,7 @@
> },
> {
> "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed inside a transactional region",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x5d",
> "EventName": "TX_EXEC.MISC2",
> "PublicDescription": "Counts Unfriendly TSX abort triggered by a vzeroupper instruction.",
> @@ -185,6 +212,7 @@
> },
> {
> "BriefDescription": "Number of times an instruction execution caused the transactional nest count supported to be exceeded",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x5d",
> "EventName": "TX_EXEC.MISC3",
> "PublicDescription": "Counts Unfriendly TSX abort triggered by a nest count that is too deep.",
> @@ -193,6 +221,7 @@
> },
> {
> "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional reads",
> + "Counter": "0,1,2,3",
> "EventCode": "0x54",
> "EventName": "TX_MEM.ABORT_CAPACITY_READ",
> "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional reads",
> @@ -201,6 +230,7 @@
> },
> {
> "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional writes.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x54",
> "EventName": "TX_MEM.ABORT_CAPACITY_WRITE",
> "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional writes.",
> @@ -209,6 +239,7 @@
> },
> {
> "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
> + "Counter": "0,1,2,3",
> "EventCode": "0x54",
> "EventName": "TX_MEM.ABORT_CONFLICT",
> "PublicDescription": "Counts the number of times a TSX line had a cache conflict.",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/other.json b/tools/perf/pmu-events/arch/x86/tigerlake/other.json
> index 55f3048bc..77ba139cd 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/other.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/other.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x28",
> "EventName": "CORE_POWER.LVL0_TURBO_LICENSE",
> "PublicDescription": "Counts Core cycles where the core was running with power-delivery for baseline license level 0. This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x28",
> "EventName": "CORE_POWER.LVL1_TURBO_LICENSE",
> "PublicDescription": "Counts Core cycles where the core was running with power-delivery for license level 1. This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x28",
> "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
> "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server microarchtecture). This includes high current AVX 512-bit instructions.",
> @@ -25,6 +28,7 @@
> },
> {
> "BriefDescription": "Counts streaming stores that have any type of response.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xB7, 0xBB",
> "EventName": "OCR.STREAMING_WR.ANY_RESPONSE",
> "MSRIndex": "0x1a6,0x1a7",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json
> index 541bf1dd1..3fd22fc0a 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0x14",
> "EventName": "ARITH.DIVIDER_ACTIVE",
> @@ -10,6 +11,7 @@
> },
> {
> "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc1",
> "EventName": "ASSISTS.ANY",
> "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.",
> @@ -18,6 +20,7 @@
> },
> {
> "BriefDescription": "All branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
> "PEBS": "1",
> @@ -26,6 +29,7 @@
> },
> {
> "BriefDescription": "Conditional branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.COND",
> "PEBS": "1",
> @@ -35,6 +39,7 @@
> },
> {
> "BriefDescription": "Not taken branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.COND_NTAKEN",
> "PEBS": "1",
> @@ -44,6 +49,7 @@
> },
> {
> "BriefDescription": "Taken conditional branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.COND_TAKEN",
> "PEBS": "1",
> @@ -53,6 +59,7 @@
> },
> {
> "BriefDescription": "Far branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.FAR_BRANCH",
> "PEBS": "1",
> @@ -62,6 +69,7 @@
> },
> {
> "BriefDescription": "Indirect near branch instructions retired (excluding returns)",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.INDIRECT",
> "PEBS": "1",
> @@ -71,6 +79,7 @@
> },
> {
> "BriefDescription": "Direct and indirect near call instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.NEAR_CALL",
> "PEBS": "1",
> @@ -80,6 +89,7 @@
> },
> {
> "BriefDescription": "Return instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.NEAR_RETURN",
> "PEBS": "1",
> @@ -89,6 +99,7 @@
> },
> {
> "BriefDescription": "Taken branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc4",
> "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
> "PEBS": "1",
> @@ -98,6 +109,7 @@
> },
> {
> "BriefDescription": "All mispredicted branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
> "PEBS": "1",
> @@ -106,6 +118,7 @@
> },
> {
> "BriefDescription": "Mispredicted conditional branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.COND",
> "PEBS": "1",
> @@ -115,6 +128,7 @@
> },
> {
> "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.COND_NTAKEN",
> "PEBS": "1",
> @@ -124,6 +138,7 @@
> },
> {
> "BriefDescription": "number of branch instructions retired that were mispredicted and taken.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.COND_TAKEN",
> "PEBS": "1",
> @@ -133,6 +148,7 @@
> },
> {
> "BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.INDIRECT",
> "PEBS": "1",
> @@ -142,6 +158,7 @@
> },
> {
> "BriefDescription": "Mispredicted indirect CALL instructions retired.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.INDIRECT_CALL",
> "PEBS": "1",
> @@ -151,6 +168,7 @@
> },
> {
> "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
> "PEBS": "1",
> @@ -160,6 +178,7 @@
> },
> {
> "BriefDescription": "This event counts the number of mispredicted ret instructions retired. Non PEBS",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc5",
> "EventName": "BR_MISP_RETIRED.RET",
> "PEBS": "1",
> @@ -169,6 +188,7 @@
> },
> {
> "BriefDescription": "Cycle counts are evenly distributed between active threads in the Core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xec",
> "EventName": "CPU_CLK_UNHALTED.DISTRIBUTED",
> "PublicDescription": "This event distributes cycle counts between active hyperthreads, i.e., those in C0. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If all other hyperthreads are inactive (or disabled or do not exist), all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.",
> @@ -177,6 +197,7 @@
> },
> {
> "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x3c",
> "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
> "PublicDescription": "Counts Core crystal clock cycles when current thread is unhalted and the other thread is halted.",
> @@ -185,6 +206,7 @@
> },
> {
> "BriefDescription": "Core crystal clock cycles. Cycle counts are evenly distributed between active threads in the Core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x3c",
> "EventName": "CPU_CLK_UNHALTED.REF_DISTRIBUTED",
> "PublicDescription": "This event distributes Core crystal clock cycle counts between active hyperthreads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If one thread is active in a core, all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.",
> @@ -193,6 +215,7 @@
> },
> {
> "BriefDescription": "Reference cycles when the core is not in halt state.",
> + "Counter": "Fixed counter 2",
> "EventName": "CPU_CLK_UNHALTED.REF_TSC",
> "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'. The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'. After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
> "SampleAfterValue": "2000003",
> @@ -200,6 +223,7 @@
> },
> {
> "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x3c",
> "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
> "PublicDescription": "Counts core crystal clock cycles when the thread is unhalted.",
> @@ -208,6 +232,7 @@
> },
> {
> "BriefDescription": "Core cycles when the thread is not in halt state",
> + "Counter": "Fixed counter 1",
> "EventName": "CPU_CLK_UNHALTED.THREAD",
> "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events.",
> "SampleAfterValue": "2000003",
> @@ -215,6 +240,7 @@
> },
> {
> "BriefDescription": "Thread cycles when thread is not in halt state",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x3c",
> "EventName": "CPU_CLK_UNHALTED.THREAD_P",
> "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
> @@ -222,6 +248,7 @@
> },
> {
> "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "8",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
> @@ -230,6 +257,7 @@
> },
> {
> "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
> @@ -238,6 +266,7 @@
> },
> {
> "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "16",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
> @@ -246,6 +275,7 @@
> },
> {
> "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "12",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
> @@ -254,6 +284,7 @@
> },
> {
> "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
> + "Counter": "0,1,2,3",
> "CounterMask": "5",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
> @@ -262,6 +293,7 @@
> },
> {
> "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "20",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
> @@ -270,6 +302,7 @@
> },
> {
> "BriefDescription": "Total execution stalls.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "4",
> "EventCode": "0xa3",
> "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
> @@ -278,6 +311,7 @@
> },
> {
> "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
> "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
> @@ -286,6 +320,7 @@
> },
> {
> "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
> "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
> @@ -294,6 +329,7 @@
> },
> {
> "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.3_PORTS_UTIL",
> "PublicDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.",
> @@ -302,6 +338,7 @@
> },
> {
> "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
> "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
> @@ -310,6 +347,7 @@
> },
> {
> "BriefDescription": "Cycles when the memory subsystem has an outstanding load. Increments by 4 for every such cycle.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "5",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.BOUND_ON_LOADS",
> @@ -319,6 +357,7 @@
> },
> {
> "BriefDescription": "Cycles where the Store Buffer was full and no loads caused an execution stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "2",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
> @@ -328,6 +367,7 @@
> },
> {
> "BriefDescription": "Cycles no uop executed while RS was not empty, the SB was not full and there was no outstanding load.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa6",
> "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
> "PublicDescription": "Number of cycles total of 0 uops executed on all ports, Reservation Station (RS) was not empty, the Store Buffer (SB) was not full and there was no outstanding load.",
> @@ -336,6 +376,7 @@
> },
> {
> "BriefDescription": "Stalls caused by changing prefix length of the instruction. [This event is alias to DECODE.LCP]",
> + "Counter": "0,1,2,3",
> "EventCode": "0x87",
> "EventName": "ILD_STALL.LCP",
> "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk. [This event is alias to DECODE.LCP]",
> @@ -344,6 +385,7 @@
> },
> {
> "BriefDescription": "Instruction decoders utilized in a cycle",
> + "Counter": "0,1,2,3",
> "EventCode": "0x55",
> "EventName": "INST_DECODED.DECODERS",
> "PublicDescription": "Number of decoders utilized in a cycle when the MITE (legacy decode pipeline) fetches instructions.",
> @@ -352,6 +394,7 @@
> },
> {
> "BriefDescription": "Number of instructions retired. Fixed Counter - architectural event",
> + "Counter": "Fixed counter 0",
> "EventName": "INST_RETIRED.ANY",
> "PEBS": "1",
> "PublicDescription": "Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.",
> @@ -360,6 +403,7 @@
> },
> {
> "BriefDescription": "Number of instructions retired. General Counter - architectural event",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc0",
> "EventName": "INST_RETIRED.ANY_P",
> "PEBS": "1",
> @@ -368,6 +412,7 @@
> },
> {
> "BriefDescription": "Retired NOP instructions.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc0",
> "EventName": "INST_RETIRED.NOP",
> "PEBS": "1",
> @@ -377,6 +422,7 @@
> },
> {
> "BriefDescription": "Precise instruction retired event with a reduced effect of PEBS shadow in IP distribution",
> + "Counter": "Fixed counter 0",
> "EventName": "INST_RETIRED.PREC_DIST",
> "PEBS": "1",
> "PublicDescription": "A version of INST_RETIRED that allows for a more unbiased distribution of samples across instructions retired. It utilizes the Precise Distribution of Instructions Retired (PDIR) feature to mitigate some bias in how retired instructions get sampled. Use on Fixed Counter 0.",
> @@ -385,6 +431,7 @@
> },
> {
> "BriefDescription": "Cycles the Backend cluster is recovering after a miss-speculation or a Store Buffer or Load Buffer drain stall.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0x0d",
> "EventName": "INT_MISC.ALL_RECOVERY_CYCLES",
> @@ -394,6 +441,7 @@
> },
> {
> "BriefDescription": "Clears speculative count",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0x0d",
> @@ -404,6 +452,7 @@
> },
> {
> "BriefDescription": "Counts cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x0d",
> "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
> "PublicDescription": "Cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.",
> @@ -412,6 +461,7 @@
> },
> {
> "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x0d",
> "EventName": "INT_MISC.RECOVERY_CYCLES",
> "PublicDescription": "Counts core cycles when the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
> @@ -420,6 +470,7 @@
> },
> {
> "BriefDescription": "TMA slots where uops got dropped",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x0d",
> "EventName": "INT_MISC.UOP_DROPPING",
> "PublicDescription": "Estimated number of Top-down Microarchitecture Analysis slots that got dropped due to non front-end reasons",
> @@ -428,6 +479,7 @@
> },
> {
> "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x03",
> "EventName": "LD_BLOCKS.NO_SR",
> "PublicDescription": "Counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
> @@ -436,6 +488,7 @@
> },
> {
> "BriefDescription": "Loads blocked due to overlapping with a preceding store that cannot be forwarded.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x03",
> "EventName": "LD_BLOCKS.STORE_FORWARD",
> "PublicDescription": "Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.",
> @@ -444,6 +497,7 @@
> },
> {
> "BriefDescription": "False dependencies in MOB due to partial compare on address.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x07",
> "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
> "PublicDescription": "Counts the number of times a load got blocked due to false dependencies in MOB due to partial compare on address.",
> @@ -452,6 +506,7 @@
> },
> {
> "BriefDescription": "Counts the number of demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x4c",
> "EventName": "LOAD_HIT_PREFETCH.SWPF",
> "PublicDescription": "Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.",
> @@ -460,6 +515,7 @@
> },
> {
> "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0xa8",
> "EventName": "LSD.CYCLES_ACTIVE",
> @@ -469,6 +525,7 @@
> },
> {
> "BriefDescription": "Cycles optimal number of Uops delivered by the LSD, but did not come from the decoder.",
> + "Counter": "0,1,2,3",
> "CounterMask": "5",
> "EventCode": "0xa8",
> "EventName": "LSD.CYCLES_OK",
> @@ -478,6 +535,7 @@
> },
> {
> "BriefDescription": "Number of Uops delivered by the LSD.",
> + "Counter": "0,1,2,3",
> "EventCode": "0xa8",
> "EventName": "LSD.UOPS",
> "PublicDescription": "Counts the number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
> @@ -486,6 +544,7 @@
> },
> {
> "BriefDescription": "Number of machine clears (nukes) of any type.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0xc3",
> @@ -496,6 +555,7 @@
> },
> {
> "BriefDescription": "Self-modifying code (SMC) detected.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc3",
> "EventName": "MACHINE_CLEARS.SMC",
> "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
> @@ -504,6 +564,7 @@
> },
> {
> "BriefDescription": "Increments whenever there is an update to the LBR array.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xcc",
> "EventName": "MISC_RETIRED.LBR_INSERTS",
> "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
> @@ -512,6 +573,7 @@
> },
> {
> "BriefDescription": "Number of retired PAUSE instructions. This event is not supported on first SKL and KBL products.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xcc",
> "EventName": "MISC_RETIRED.PAUSE_INST",
> "PublicDescription": "Counts number of retired PAUSE instructions. This event is not supported on first SKL and KBL products.",
> @@ -520,6 +582,7 @@
> },
> {
> "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa2",
> "EventName": "RESOURCE_STALLS.SB",
> "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
> @@ -528,6 +591,7 @@
> },
> {
> "BriefDescription": "Counts cycles where the pipeline is stalled due to serializing operations.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa2",
> "EventName": "RESOURCE_STALLS.SCOREBOARD",
> "SampleAfterValue": "100003",
> @@ -535,6 +599,7 @@
> },
> {
> "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x5e",
> "EventName": "RS_EVENTS.EMPTY_CYCLES",
> "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for this logical processor. This is usually caused when the front-end pipeline runs into stravation periods (e.g. branch mispredictions or i-cache misses)",
> @@ -543,6 +608,7 @@
> },
> {
> "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EdgeDetect": "1",
> "EventCode": "0x5e",
> @@ -554,6 +620,7 @@
> },
> {
> "BriefDescription": "TMA slots where no uops were being issued due to lack of back-end resources.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa4",
> "EventName": "TOPDOWN.BACKEND_BOUND_SLOTS",
> "PublicDescription": "Counts the number of Top-down Microarchitecture Analysis (TMA) method's slots where no micro-operations were being issued from front-end to back-end of the machine due to lack of back-end resources.",
> @@ -562,6 +629,7 @@
> },
> {
> "BriefDescription": "TMA slots wasted due to incorrect speculation by branch mispredictions",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa4",
> "EventName": "TOPDOWN.BR_MISPREDICT_SLOTS",
> "PublicDescription": "Number of TMA slots that were wasted due to incorrect speculation by branch mispredictions. This event estimates number of operations that were issued but not retired from the speculative path as well as the out-of-order engine recovery past a branch misprediction.",
> @@ -570,6 +638,7 @@
> },
> {
> "BriefDescription": "TMA slots available for an unhalted logical processor. Fixed counter - architectural event",
> + "Counter": "Fixed counter 3",
> "EventName": "TOPDOWN.SLOTS",
> "PublicDescription": "Number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method (TMA). The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core. Software can use this event as the denominator for the top-level metrics of the TMA method. This architectural event is counted on a designated fixed counter (Fixed Counter 3).",
> "SampleAfterValue": "10000003",
> @@ -577,6 +646,7 @@
> },
> {
> "BriefDescription": "TMA slots available for an unhalted logical processor. General counter - architectural event",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa4",
> "EventName": "TOPDOWN.SLOTS_P",
> "PublicDescription": "Counts the number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method. The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core.",
> @@ -585,6 +655,7 @@
> },
> {
> "BriefDescription": "Number of uops decoded out of instructions exclusively fetched by decoder 0",
> + "Counter": "0,1,2,3",
> "EventCode": "0x56",
> "EventName": "UOPS_DECODED.DEC0",
> "PublicDescription": "Uops exclusively fetched by decoder 0",
> @@ -593,6 +664,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 0",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_0",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
> @@ -601,6 +673,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 1",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_1",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
> @@ -609,6 +682,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 2 and 3",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_2_3",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 2 and 3.",
> @@ -617,6 +691,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 4 and 9",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_4_9",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 5 and 9.",
> @@ -625,6 +700,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 5",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_5",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
> @@ -633,6 +709,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 6",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_6",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
> @@ -641,6 +718,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on port 7 and 8",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xa1",
> "EventName": "UOPS_DISPATCHED.PORT_7_8",
> "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 7 and 8.",
> @@ -649,6 +727,7 @@
> },
> {
> "BriefDescription": "Number of uops executed on the core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CORE",
> "PublicDescription": "Counts the number of uops executed from any thread.",
> @@ -657,6 +736,7 @@
> },
> {
> "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
> @@ -666,6 +746,7 @@
> },
> {
> "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "2",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
> @@ -675,6 +756,7 @@
> },
> {
> "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "3",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
> @@ -684,6 +766,7 @@
> },
> {
> "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "4",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
> @@ -693,6 +776,7 @@
> },
> {
> "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CYCLES_GE_1",
> @@ -702,6 +786,7 @@
> },
> {
> "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "2",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CYCLES_GE_2",
> @@ -711,6 +796,7 @@
> },
> {
> "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "3",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CYCLES_GE_3",
> @@ -720,6 +806,7 @@
> },
> {
> "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "4",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.CYCLES_GE_4",
> @@ -729,6 +816,7 @@
> },
> {
> "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.STALL_CYCLES",
> @@ -739,6 +827,7 @@
> },
> {
> "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.THREAD",
> "SampleAfterValue": "2000003",
> @@ -746,6 +835,7 @@
> },
> {
> "BriefDescription": "Counts the number of x87 uops dispatched.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xb1",
> "EventName": "UOPS_EXECUTED.X87",
> "PublicDescription": "Counts the number of x87 uops executed.",
> @@ -754,6 +844,7 @@
> },
> {
> "BriefDescription": "Uops that RAT issues to RS",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x0e",
> "EventName": "UOPS_ISSUED.ANY",
> "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
> @@ -762,6 +853,7 @@
> },
> {
> "BriefDescription": "Cycles when RAT does not issue Uops to RS for the thread",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0x0e",
> "EventName": "UOPS_ISSUED.STALL_CYCLES",
> @@ -772,6 +864,7 @@
> },
> {
> "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0x0e",
> "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
> "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
> @@ -780,6 +873,7 @@
> },
> {
> "BriefDescription": "Retirement slots used.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "EventCode": "0xc2",
> "EventName": "UOPS_RETIRED.SLOTS",
> "PublicDescription": "Counts the retirement slots used each cycle.",
> @@ -788,6 +882,7 @@
> },
> {
> "BriefDescription": "Cycles without actually retired uops.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "1",
> "EventCode": "0xc2",
> "EventName": "UOPS_RETIRED.STALL_CYCLES",
> @@ -798,6 +893,7 @@
> },
> {
> "BriefDescription": "Cycles with less than 10 actually retired uops.",
> + "Counter": "0,1,2,3,4,5,6,7",
> "CounterMask": "10",
> "EventCode": "0xc2",
> "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-interconnect.json b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-interconnect.json
> index eed1b90a2..28bb52268 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-interconnect.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-interconnect.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "UNC_ARB_COH_TRK_REQUESTS.ALL",
> + "Counter": "0,1",
> "EventCode": "0x84",
> "EventName": "UNC_ARB_COH_TRK_REQUESTS.ALL",
> "PerPkg": "1",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Each cycle counts number of any coherent request at memory controller that were issued by any core.",
> + "Counter": "0",
> "EventCode": "0x85",
> "EventName": "UNC_ARB_DAT_OCCUPANCY.ALL",
> "PerPkg": "1",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Each cycle counts number of coherent reads pending on data return from memory controller that were issued by any core.",
> + "Counter": "0",
> "EventCode": "0x85",
> "EventName": "UNC_ARB_DAT_OCCUPANCY.RD",
> "PerPkg": "1",
> @@ -25,6 +28,7 @@
> },
> {
> "BriefDescription": "This event is deprecated. Refer to new event UNC_ARB_REQ_TRK_REQUEST.DRD",
> + "Counter": "0,1",
> "EventCode": "0x81",
> "EventName": "UNC_ARB_DAT_REQUESTS.RD",
> "PerPkg": "1",
> @@ -33,6 +37,7 @@
> },
> {
> "BriefDescription": "This event is deprecated. Refer to new event UNC_ARB_DAT_OCCUPANCY.ALL",
> + "Counter": "0",
> "EventCode": "0x85",
> "EventName": "UNC_ARB_IFA_OCCUPANCY.ALL",
> "PerPkg": "1",
> @@ -41,6 +46,7 @@
> },
> {
> "BriefDescription": "Each cycle count number of 'valid' coherent Data Read entries . Such entry is defined as valid when it is allocated till deallocation. Doesn't include prefetches [This event is alias to UNC_ARB_TRK_OCCUPANCY.RD]",
> + "Counter": "0",
> "EventCode": "0x80",
> "EventName": "UNC_ARB_REQ_TRK_OCCUPANCY.DRD",
> "PerPkg": "1",
> @@ -49,6 +55,7 @@
> },
> {
> "BriefDescription": "Number of all coherent Data Read entries. Doesn't include prefetches [This event is alias to UNC_ARB_TRK_REQUESTS.RD]",
> + "Counter": "0,1",
> "EventCode": "0x81",
> "EventName": "UNC_ARB_REQ_TRK_REQUEST.DRD",
> "PerPkg": "1",
> @@ -57,6 +64,7 @@
> },
> {
> "BriefDescription": "Each cycle count number of all outgoing valid entries in ReqTrk. Such entry is defined as valid from it's allocation in ReqTrk till deallocation. Accounts for Coherent and non-coherent traffic.",
> + "Counter": "0",
> "EventCode": "0x80",
> "EventName": "UNC_ARB_TRK_OCCUPANCY.ALL",
> "PerPkg": "1",
> @@ -65,6 +73,7 @@
> },
> {
> "BriefDescription": "Each cycle count number of 'valid' coherent Data Read entries . Such entry is defined as valid when it is allocated till deallocation. Doesn't include prefetches [This event is alias to UNC_ARB_REQ_TRK_OCCUPANCY.DRD]",
> + "Counter": "0",
> "EventCode": "0x80",
> "EventName": "UNC_ARB_TRK_OCCUPANCY.RD",
> "PerPkg": "1",
> @@ -73,6 +82,7 @@
> },
> {
> "BriefDescription": "UNC_ARB_TRK_REQUESTS.ALL",
> + "Counter": "0,1",
> "EventCode": "0x81",
> "EventName": "UNC_ARB_TRK_REQUESTS.ALL",
> "PerPkg": "1",
> @@ -81,6 +91,7 @@
> },
> {
> "BriefDescription": "Number of all coherent Data Read entries. Doesn't include prefetches [This event is alias to UNC_ARB_REQ_TRK_REQUEST.DRD]",
> + "Counter": "0,1",
> "EventCode": "0x81",
> "EventName": "UNC_ARB_TRK_REQUESTS.RD",
> "PerPkg": "1",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-memory.json b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-memory.json
> index 99fb5259f..ea213045c 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-memory.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-memory.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Counts every read (RdCAS) issued by the Memory Controller to DRAM (sum of all channels). All requests result in 64 byte data transfers from DRAM.",
> + "Counter": "1",
> "EventCode": "0xff",
> "EventName": "UNC_MC0_RDCAS_COUNT_FREERUN",
> "PerPkg": "1",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Counts every 64B read and write request entering the Memory Controller to DRAM (sum of all channels). Each write request counts as a new request incrementing this counter. However, same cache line write requests (both full and partial) are combined to a single 64 byte data transfer to DRAM.",
> + "Counter": "0",
> "EventCode": "0xff",
> "EventName": "UNC_MC0_TOTAL_REQCOUNT_FREERUN",
> "PerPkg": "1",
> @@ -17,6 +19,7 @@
> },
> {
> "BriefDescription": "Counts every write (WrCAS) issued by the Memory Controller to DRAM (sum of all channels). All requests result in 64 byte data transfers from DRAM.",
> + "Counter": "2",
> "EventCode": "0xff",
> "EventName": "UNC_MC0_WRCAS_COUNT_FREERUN",
> "PerPkg": "1",
> @@ -25,6 +28,7 @@
> },
> {
> "BriefDescription": "Counts every read (RdCAS) issued by the Memory Controller to DRAM (sum of all channels). All requests result in 64 byte data transfers from DRAM.",
> + "Counter": "4",
> "EventCode": "0xff",
> "EventName": "UNC_MC1_RDCAS_COUNT_FREERUN",
> "PerPkg": "1",
> @@ -33,6 +37,7 @@
> },
> {
> "BriefDescription": "Counts every 64B read and write request entering the Memory Controller to DRAM (sum of all channels). Each write request counts as a new request incrementing this counter. However, same cache line write requests (both full and partial) are combined to a single 64 byte data transfer to DRAM.",
> + "Counter": "3",
> "EventCode": "0xff",
> "EventName": "UNC_MC1_TOTAL_REQCOUNT_FREERUN",
> "PerPkg": "1",
> @@ -41,6 +46,7 @@
> },
> {
> "BriefDescription": "Counts every write (WrCAS) issued by the Memory Controller to DRAM (sum of all channels). All requests result in 64 byte data transfers from DRAM.",
> + "Counter": "5",
> "EventCode": "0xff",
> "EventName": "UNC_MC1_WRCAS_COUNT_FREERUN",
> "PerPkg": "1",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-other.json b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-other.json
> index c6596ba09..87de3bbc4 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/uncore-other.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/uncore-other.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "UNC_CLOCK.SOCKET",
> + "Counter": "Fixed",
> "EventCode": "0xff",
> "EventName": "UNC_CLOCK.SOCKET",
> "PerPkg": "1",
> diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json b/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json
> index adb2f6b3e..62dc0fc76 100644
> --- a/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json
> +++ b/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json
> @@ -1,6 +1,7 @@
> [
> {
> "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
> "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
> @@ -9,6 +10,7 @@
> },
> {
> "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a demand load.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE",
> @@ -18,6 +20,7 @@
> },
> {
> "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
> + "Counter": "0,1,2,3",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
> "PublicDescription": "Counts completed page walks (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
> @@ -26,6 +29,7 @@
> },
> {
> "BriefDescription": "Page walks completed due to a demand data load to a 2M/4M page.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
> "PublicDescription": "Counts completed page walks (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
> @@ -34,6 +38,7 @@
> },
> {
> "BriefDescription": "Page walks completed due to a demand data load to a 4K page.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
> "PublicDescription": "Counts completed page walks (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
> @@ -42,6 +47,7 @@
> },
> {
> "BriefDescription": "Number of page walks outstanding for a demand load in the PMH each cycle.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x08",
> "EventName": "DTLB_LOAD_MISSES.WALK_PENDING",
> "PublicDescription": "Counts the number of page walks outstanding for a demand load in the PMH (Page Miss Handler) each cycle.",
> @@ -50,6 +56,7 @@
> },
> {
> "BriefDescription": "Stores that miss the DTLB and hit the STLB.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.STLB_HIT",
> "PublicDescription": "Counts stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).",
> @@ -58,6 +65,7 @@
> },
> {
> "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.WALK_ACTIVE",
> @@ -67,6 +75,7 @@
> },
> {
> "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
> + "Counter": "0,1,2,3",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
> "PublicDescription": "Counts completed page walks (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
> @@ -75,6 +84,7 @@
> },
> {
> "BriefDescription": "Page walks completed due to a demand data store to a 2M/4M page.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
> "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 2M/4M pages. The page walks can end with or without a page fault.",
> @@ -83,6 +93,7 @@
> },
> {
> "BriefDescription": "Page walks completed due to a demand data store to a 4K page.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
> "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 4K pages. The page walks can end with or without a page fault.",
> @@ -91,6 +102,7 @@
> },
> {
> "BriefDescription": "Number of page walks outstanding for a store in the PMH each cycle.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x49",
> "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
> "PublicDescription": "Counts the number of page walks outstanding for a store in the PMH (Page Miss Handler) each cycle.",
> @@ -99,6 +111,7 @@
> },
> {
> "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.STLB_HIT",
> "PublicDescription": "Counts instruction fetch requests that miss the ITLB (Instruction TLB) and hit the STLB (Second-level TLB).",
> @@ -107,6 +120,7 @@
> },
> {
> "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request.",
> + "Counter": "0,1,2,3",
> "CounterMask": "1",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.WALK_ACTIVE",
> @@ -116,6 +130,7 @@
> },
> {
> "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
> + "Counter": "0,1,2,3",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.WALK_COMPLETED",
> "PublicDescription": "Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
> @@ -124,6 +139,7 @@
> },
> {
> "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (2M/4M)",
> + "Counter": "0,1,2,3",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
> "PublicDescription": "Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
> @@ -132,6 +148,7 @@
> },
> {
> "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
> + "Counter": "0,1,2,3",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
> "PublicDescription": "Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
> @@ -140,6 +157,7 @@
> },
> {
> "BriefDescription": "Number of page walks outstanding for an outstanding code request in the PMH each cycle.",
> + "Counter": "0,1,2,3",
> "EventCode": "0x85",
> "EventName": "ITLB_MISSES.WALK_PENDING",
> "PublicDescription": "Counts the number of page walks outstanding for an outstanding code (instruction fetch) request in the PMH (Page Miss Handler) each cycle.",
> @@ -148,6 +166,7 @@
> },
> {
> "BriefDescription": "DTLB flush attempts of the thread-specific entries",
> + "Counter": "0,1,2,3",
> "EventCode": "0xbd",
> "EventName": "TLB_FLUSH.DTLB_THREAD",
> "PublicDescription": "Counts the number of DTLB flush attempts of the thread-specific entries.",
> @@ -156,6 +175,7 @@
> },
> {
> "BriefDescription": "STLB flush attempts",
> + "Counter": "0,1,2,3",
> "EventCode": "0xbd",
> "EventName": "TLB_FLUSH.STLB_ANY",
> "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",

Next message: Alexander Aring: "Re: [PATCH] [v2] ieee802154: ca8210: Fix a potential UAF in ca8210_probe"
Previous message: Paolo Bonzini: "Re: [PATCH v2 3/4] KVM: x86: add more information to kvm_exit tracepoint"
In reply to: weilin . wang: "[RFC PATCH 25/25] perf pmu-events: Add event counter data for Tigerlake"
Next in thread: Ian Rogers: "Re: [RFC PATCH 00/25] Perf stat metric grouping with hardware information"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]