Re: [PATCH V7 3/7] cpufreq: amd-pstate: Enable amd-pstate preferred core supporting.

From: Huang Rui
Date: Tue Sep 19 2023 - 22:44:37 EST


On Mon, Sep 18, 2023 at 04:14:03PM +0800, Meng, Li (Jassmine) wrote:
> amd-pstate driver utilizes the functions and data structures
> provided by the ITMT architecture to enable the scheduler to
> favor scheduling on cores which can be get a higher frequency
> with lower voltage. We call it amd-pstate preferrred core.
>
> Here sched_set_itmt_core_prio() is called to set priorities and
> sched_set_itmt_support() is called to enable ITMT feature.
> amd-pstate driver uses the highest performance value to indicate
> the priority of CPU. The higher value has a higher priority.
>
> The initial core rankings are set up by amd-pstate when the
> system boots.
>
> Add device attribute for hardware preferred core. It will check
> if the processor and power firmware support preferred core
> feature.
>
> Add device attribute for preferred core. Only when hardware
> supports preferred core and user set `enabled` in early parameter,
> it can be set to enabled.
>
> Add one new early parameter `disable` to allow user to disable
> the preferred core.
>
> Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
> Co-developed-by: Perry Yuan <Perry.Yuan@xxxxxxx>
> Signed-off-by: Perry Yuan <Perry.Yuan@xxxxxxx>
> Signed-off-by: Meng Li <li.meng@xxxxxxx>
> ---
> drivers/cpufreq/amd-pstate.c | 163 +++++++++++++++++++++++++++++++----
> 1 file changed, 147 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c
> index 9a1e194d5cf8..050e23594057 100644
> --- a/drivers/cpufreq/amd-pstate.c
> +++ b/drivers/cpufreq/amd-pstate.c
> @@ -37,6 +37,7 @@
> #include <linux/uaccess.h>
> #include <linux/static_call.h>
> #include <linux/amd-pstate.h>
> +#include <linux/topology.h>
>
> #include <acpi/processor.h>
> #include <acpi/cppc_acpi.h>
> @@ -49,6 +50,8 @@
>
> #define AMD_PSTATE_TRANSITION_LATENCY 20000
> #define AMD_PSTATE_TRANSITION_DELAY 1000
> +#define AMD_PSTATE_PREFCORE_THRESHOLD 166
> +#define AMD_PSTATE_MAX_CPPC_PERF 255
>
> /*
> * TODO: We need more time to fine tune processors with shared memory solution
> @@ -65,6 +68,12 @@ static struct cpufreq_driver amd_pstate_epp_driver;
> static int cppc_state = AMD_PSTATE_UNDEFINED;
> static bool cppc_enabled;
>
> +/*HW preferred Core featue is supported*/
> +static bool hw_prefcore = true;
> +
> +/*Preferred Core featue is supported*/
> +static bool prefcore = true;
> +
> /*
> * AMD Energy Preference Performance (EPP)
> * The EPP is used in the CCLK DPM controller to drive
> @@ -290,23 +299,21 @@ static inline int amd_pstate_enable(bool enable)
> static int pstate_init_perf(struct amd_cpudata *cpudata)
> {
> u64 cap1;
> - u32 highest_perf;
>
> int ret = rdmsrl_safe_on_cpu(cpudata->cpu, MSR_AMD_CPPC_CAP1,
> &cap1);
> if (ret)
> return ret;
>
> - /*
> - * TODO: Introduce AMD specific power feature.
> - *
> - * CPPC entry doesn't indicate the highest performance in some ASICs.
> + /* For platforms that do not support the preferred core feature, the
> + * highest_pef may be configured with 166 or 255, to avoid max frequency
> + * calculated wrongly. we take the AMD_CPPC_HIGHEST_PERF(cap1) value as
> + * the default max perf.
> */
> - highest_perf = amd_get_highest_perf();
> - if (highest_perf > AMD_CPPC_HIGHEST_PERF(cap1))
> - highest_perf = AMD_CPPC_HIGHEST_PERF(cap1);
> -
> - WRITE_ONCE(cpudata->highest_perf, highest_perf);
> + if (hw_prefcore)
> + WRITE_ONCE(cpudata->highest_perf, AMD_PSTATE_PREFCORE_THRESHOLD);
> + else
> + WRITE_ONCE(cpudata->highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
>
> WRITE_ONCE(cpudata->nominal_perf, AMD_CPPC_NOMINAL_PERF(cap1));
> WRITE_ONCE(cpudata->lowest_nonlinear_perf, AMD_CPPC_LOWNONLIN_PERF(cap1));
> @@ -318,17 +325,15 @@ static int pstate_init_perf(struct amd_cpudata *cpudata)
> static int cppc_init_perf(struct amd_cpudata *cpudata)
> {
> struct cppc_perf_caps cppc_perf;
> - u32 highest_perf;
>
> int ret = cppc_get_perf_caps(cpudata->cpu, &cppc_perf);
> if (ret)
> return ret;
>
> - highest_perf = amd_get_highest_perf();
> - if (highest_perf > cppc_perf.highest_perf)
> - highest_perf = cppc_perf.highest_perf;
> -
> - WRITE_ONCE(cpudata->highest_perf, highest_perf);
> + if (hw_prefcore)
> + WRITE_ONCE(cpudata->highest_perf, AMD_PSTATE_PREFCORE_THRESHOLD);
> + else
> + WRITE_ONCE(cpudata->highest_perf, cppc_perf.highest_perf);
>
> WRITE_ONCE(cpudata->nominal_perf, cppc_perf.nominal_perf);
> WRITE_ONCE(cpudata->lowest_nonlinear_perf,
> @@ -676,6 +681,90 @@ static void amd_perf_ctl_reset(unsigned int cpu)
> wrmsrl_on_cpu(cpu, MSR_AMD_PERF_CTL, 0);
> }
>
> +/*
> + * Set amd-pstate preferred core enable can't be done directly from cpufreq callbacks
> + * due to locking, so queue the work for later.
> + */
> +static void amd_pstste_sched_prefcore_workfn(struct work_struct *work)
> +{
> + sched_set_itmt_support();
> +}
> +static DECLARE_WORK(sched_prefcore_work, amd_pstste_sched_prefcore_workfn);
> +
> +/*
> + * Get the highest performance register value.
> + * @cpu: CPU from which to get highest performance.
> + * @highest_perf: Return address.
> + *
> + * Return: 0 for success, -EIO otherwise.
> + */
> +static int amd_pstate_get_highest_perf(int cpu, u32 *highest_perf)
> +{
> + int ret;
> + u64 cppc_highest_perf;
> +
> + if (boot_cpu_has(X86_FEATURE_CPPC)) {
> + u64 cap1;
> +
> + ret = rdmsrl_safe_on_cpu(cpu, MSR_AMD_CPPC_CAP1, &cap1);
> + if (ret)
> + return ret;
> + WRITE_ONCE(*highest_perf, AMD_CPPC_HIGHEST_PERF(cap1));
> + } else {
> + ret = cppc_get_highest_perf(cpu, &cppc_highest_perf);
> + *highest_perf = (u32)(cppc_highest_perf & 0xFFFF);
> + }
> +
> + return (ret);
> +}
> +
> +static void amd_pstate_init_prefcore(unsigned int cpu)
> +{
> + int ret;
> + u32 highest_perf;
> + static u32 max_highest_perf = 0, min_highest_perf = U32_MAX;
> +
> + if (!prefcore)
> + return;
> +
> + ret = amd_pstate_get_highest_perf(cpu, &highest_perf);
> + if (ret)
> + return;
> +
> + /*
> + * The priorities can be set regardless of whether or not
> + * sched_set_itmt_support(true) has been called and it is valid to
> + * update them at any time after it has been called.
> + */
> + sched_set_itmt_core_prio(highest_perf, cpu);
> +
> + /* check if CPPC preferred core feature is enabled*/
> + if (highest_perf == AMD_PSTATE_MAX_CPPC_PERF) {
> + pr_debug("AMD CPPC preferred core is unsupported!\n");
> + hw_prefcore = false;
> + prefcore = false;

The problem that I commented in below version is still there. The
amd_pstate_init_prefcore() will be called in amd_pstate_cpu_init() which
will be initialized on each cpu. So the hw_perfcore/prefcore will be
overwrited at last cpu initialization.

https://lore.kernel.org/linux-pm/ZPiEM+gusure7vKy@xxxxxxx/

Thanks,
Ray

> + return;
> + }
> +
> + if (max_highest_perf <= min_highest_perf) {
> + if (highest_perf > max_highest_perf)
> + max_highest_perf = highest_perf;
> +
> + if (highest_perf < min_highest_perf)
> + min_highest_perf = highest_perf;
> +
> + if (max_highest_perf > min_highest_perf) {
> + /*
> + * This code can be run during CPU online under the
> + * CPU hotplug locks, so sched_set_itmt_support()
> + * cannot be called from here. Queue up a work item
> + * to invoke it.
> + */
> + schedule_work(&sched_prefcore_work);
> + }
> + }
> +}
> +
> static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
> {
> int min_freq, max_freq, nominal_freq, lowest_nonlinear_freq, ret;
> @@ -697,6 +786,8 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
>
> cpudata->cpu = policy->cpu;
>
> + amd_pstate_init_prefcore(policy->cpu);
> +
> ret = amd_pstate_init_perf(cpudata);
> if (ret)
> goto free_cpudata1;
> @@ -763,6 +854,22 @@ static int amd_pstate_cpu_init(struct cpufreq_policy *policy)
> return ret;
> }
>
> +static int amd_pstate_cpu_online(struct cpufreq_policy *policy)
> +{
> + struct amd_cpudata *cpudata = policy->driver_data;
> +
> + pr_debug("CPU %d going online\n", cpudata->cpu);
> +
> + amd_pstate_init_prefcore(cpudata->cpu);
> +
> + return 0;
> +}
> +
> +static int amd_pstate_cpu_offline(struct cpufreq_policy *policy)
> +{
> + return 0;
> +}
> +
> static int amd_pstate_cpu_exit(struct cpufreq_policy *policy)
> {
> struct amd_cpudata *cpudata = policy->driver_data;
> @@ -1037,6 +1144,12 @@ static ssize_t status_store(struct device *a, struct device_attribute *b,
> return ret < 0 ? ret : count;
> }
>
> +static ssize_t prefcore_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sysfs_emit(buf, "%s\n", prefcore ? "enabled" : "disabled");
> +}
> +
> cpufreq_freq_attr_ro(amd_pstate_max_freq);
> cpufreq_freq_attr_ro(amd_pstate_lowest_nonlinear_freq);
>
> @@ -1044,6 +1157,7 @@ cpufreq_freq_attr_ro(amd_pstate_highest_perf);
> cpufreq_freq_attr_rw(energy_performance_preference);
> cpufreq_freq_attr_ro(energy_performance_available_preferences);
> static DEVICE_ATTR_RW(status);
> +static DEVICE_ATTR_RO(prefcore);
>
> static struct freq_attr *amd_pstate_attr[] = {
> &amd_pstate_max_freq,
> @@ -1063,6 +1177,7 @@ static struct freq_attr *amd_pstate_epp_attr[] = {
>
> static struct attribute *pstate_global_attributes[] = {
> &dev_attr_status.attr,
> + &dev_attr_prefcore.attr,
> NULL
> };
>
> @@ -1114,6 +1229,8 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy)
> cpudata->cpu = policy->cpu;
> cpudata->epp_policy = 0;
>
> + amd_pstate_init_prefcore(policy->cpu);
> +
> ret = amd_pstate_init_perf(cpudata);
> if (ret)
> goto free_cpudata1;
> @@ -1285,6 +1402,8 @@ static int amd_pstate_epp_cpu_online(struct cpufreq_policy *policy)
>
> pr_debug("AMD CPU Core %d going online\n", cpudata->cpu);
>
> + amd_pstate_init_prefcore(cpudata->cpu);
> +
> if (cppc_state == AMD_PSTATE_ACTIVE) {
> amd_pstate_epp_reenable(cpudata);
> cpudata->suspended = false;
> @@ -1389,6 +1508,8 @@ static struct cpufreq_driver amd_pstate_driver = {
> .fast_switch = amd_pstate_fast_switch,
> .init = amd_pstate_cpu_init,
> .exit = amd_pstate_cpu_exit,
> + .offline = amd_pstate_cpu_offline,
> + .online = amd_pstate_cpu_online,
> .suspend = amd_pstate_cpu_suspend,
> .resume = amd_pstate_cpu_resume,
> .set_boost = amd_pstate_set_boost,
> @@ -1527,7 +1648,17 @@ static int __init amd_pstate_param(char *str)
>
> return amd_pstate_set_driver(mode_idx);
> }
> +
> +static int __init amd_prefcore_param(char *str)
> +{
> + if (!strcmp(str, "disable"))
> + prefcore = false;
> +
> + return 0;
> +}
> +
> early_param("amd_pstate", amd_pstate_param);
> +early_param("amd_prefcore", amd_prefcore_param);
>
> MODULE_AUTHOR("Huang Rui <ray.huang@xxxxxxx>");
> MODULE_DESCRIPTION("AMD Processor P-state Frequency Driver");
> --
> 2.34.1
>