RE: [PATCH 3/3] irqchip: renesas-rzg2l: Fix irq storm with edge trigger detection for TINT
From: Biju Das
Date: Tue Sep 19 2023 - 12:32:34 EST
Hi Marc Zyngier,
> Subject: Re: [PATCH 3/3] irqchip: renesas-rzg2l: Fix irq storm with edge
> trigger detection for TINT
>
> On Tue, 19 Sep 2023 16:24:53 +0100,
> Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> >
> > Hi Marc Zyngier,
> >
> > Thanks for the feedback.
> >
> > > Subject: Re: [PATCH 3/3] irqchip: renesas-rzg2l: Fix irq storm with
> > > edge trigger detection for TINT
> > >
> > > On Mon, 18 Sep 2023 13:24:11 +0100,
> > > Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> > > >
> > > > In case of edge trigger detection, enabling the TINT source causes
> > > > a phantum interrupt that leads to irq storm. So clear the phantum
> > > > interrupt in rzg2l_irqc_irq_enable().
> > > >
> > > > This issue is observed when the irq handler disables the
> > > > interrupts using
> > > > disable_irq_nosync() and scheduling a work queue and in the work
> > > > queue, re-enabling the interrupt with enable_irq().
> > > >
> > > > Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt
> > > > Controller
> > > > driver")
> > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > > Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> > > > ---
> > > > drivers/irqchip/irq-renesas-rzg2l.c | 6 ++++++
> > > > 1 file changed, 6 insertions(+)
> > > >
> > > > diff --git a/drivers/irqchip/irq-renesas-rzg2l.c
> > > > b/drivers/irqchip/irq-renesas-rzg2l.c
> > > > index 33a22bafedcd..78a9e90512a6 100644
> > > > --- a/drivers/irqchip/irq-renesas-rzg2l.c
> > > > +++ b/drivers/irqchip/irq-renesas-rzg2l.c
> > > > @@ -144,6 +144,12 @@ static void rzg2l_irqc_irq_enable(struct
> > > > irq_data
> > > *d)
> > > > reg = readl_relaxed(priv->base + TSSR(tssr_index));
> > > > reg |= (TIEN | tint) << TSSEL_SHIFT(tssr_offset);
> > > > writel_relaxed(reg, priv->base + TSSR(tssr_index));
> > > > + /*
> > > > + * In case of edge trigger detection, enabling the TINT
> source
> > > > + * cause a phantum interrupt that leads to irq storm. So
> clear
> > > > + * the phantum interrupt.
> > > > + */
> > > > + rzg2l_tint_eoi(d);
> > >
> > > This looks incredibly unsafe. disable_irq()+enable_irq() with an
> > > interrupt being made pending in the middle, and you've lost that
> interrupt.
> >
> > In this driver that will never happen as it clears the TINT source
> > during disable(), so there won't be any TINT source for interrupt
> > detection after disable().
>
> So you mean that you *already* lose interrupts across a disable followed by
> an enable? I'm slightly puzzled...
There is no interrupt lost at all.
Currently this patch addresses 2 issues.
Scenario 1: Extra interrupt when we select TINT source on enable_irq()
Getting an extra interrupt, when client drivers calls enable_irq() during probe()/resume(). In this case, the irq handler on the
Client driver just clear the interrupt status bit.
Issue 2: IRQ storm when we select TINT source on enable_irq()
Here as well, we are getting an extra interrupt, when client drivers calls enable_irq() during probe() and this Interrupts getting generated infinitely, when the client driver calls disable_irq() in irq handler and in in work queue calling enable_irq().
Currently we are not loosing interrupts, but we are getting additional
Interrupt(phantom) which is causing the issue.
Cheers,
Biju