Re: [RFC PATCH 1/1] ACPI / APEI: Fix for overwriting aer info when error status data have multiple sections

From: Rafael J. Wysocki
Date: Mon Sep 18 2023 - 14:23:02 EST


On Mon, Sep 18, 2023 at 8:16 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> [+to Rafael, probably the logical place to apply this]
>
> On Mon, Sep 18, 2023 at 01:07:45PM +0000, Shiju Jose wrote:
> > >-----Original Message-----
> > >From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> > > ...
>
> > >On Sat, Sep 16, 2023 at 01:44:35AM +0800, shiju.jose@xxxxxxxxxx wrote:
> > >> From: Shiju Jose <shiju.jose@xxxxxxxxxx>
> > >>
> > >> ghes_handle_aer() lacks synchronization with
> > >> aer_recover_work_func(), so when error status data have multiple
> > >> sections, aer_recover_work_func() may use estatus data for
> > >> aer_capability_regs after it has been overwritten.
> > >>
> > >> The problem statement is here,
> > >> https://lore.kernel.org/all/20230901225755.GA90053@bhelgaas/
> > >>
> > >> In ghes_handle_aer() allocates memory for aer_capability_regs from the
> > >> ghes_estatus_pool and copy data for aer_capability_regs from the
> > >> estatus buffer. Free the memory in aer_recover_work_func() after
> > >> processing the data using the ghes_estatus_pool_region_free() added.
> > >
> > >Thanks for working this up! I had it on my to-do list, but
> > >obviously had not gotten to it yet.
> > >
> > >> Reported-by: Bjorn Helgaas <helgaas@xxxxxxxxxx>
> > >> Signed-off-by: Shiju Jose <shiju.jose@xxxxxxxxxx>
> > >> ---
> > >> drivers/acpi/apei/ghes.c | 23 ++++++++++++++++++++++-
> > >> drivers/pci/pcie/aer.c | 10 ++++++++++
> > >> include/acpi/ghes.h | 1 +
> > >> 3 files changed, 33 insertions(+), 1 deletion(-)
> > >>
> > >> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index
> > >> ef59d6ea16da..63ad0541db38 100644
> > >> --- a/drivers/acpi/apei/ghes.c
> > >> +++ b/drivers/acpi/apei/ghes.c
> > >> @@ -209,6 +209,20 @@ int ghes_estatus_pool_init(unsigned int num_ghes)
> > >> return -ENOMEM;
> > >> }
> > >>
> > >> +/**
> > >> + * ghes_estatus_pool_region_free - free previously allocated memory
> > >> + * from the ghes_estatus_pool.
> > >> + * @addr: address of memory to free.
> > >> + * @size: size of memory to free.
> > >> + *
> > >> + * Returns none.
> > >> + */
> > >> +void ghes_estatus_pool_region_free(unsigned long addr, u32 size) {
> > >> + gen_pool_free(ghes_estatus_pool, addr, size); }
> > >> +EXPORT_SYMBOL_GPL(ghes_estatus_pool_region_free);
> > >> +
> > >> static int map_gen_v2(struct ghes *ghes) {
> > >> return
> > >> apei_map_generic_address(&ghes->generic_v2->read_ack_register);
> > >> @@ -564,6 +578,7 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
> > >> pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
> > >> unsigned int devfn;
> > >> int aer_severity;
> > >> + u8 *aer_info;
> > >>
> > >> devfn = PCI_DEVFN(pcie_err->device_id.device,
> > >> pcie_err->device_id.function);
> > >> @@ -577,11 +592,17 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
> > >> if (gdata->flags & CPER_SEC_RESET)
> > >> aer_severity = AER_FATAL;
> > >>
> > >> + aer_info = (void *)gen_pool_alloc(ghes_estatus_pool,
> > >> + sizeof(struct aer_capability_regs));
> > >> + if (!aer_info)
> > >> + return;
> > >> + memcpy(aer_info, pcie_err->aer_info, sizeof(struct
> > >> +aer_capability_regs));
> > >
> > >This is a very straightforward approach to fixing this, and it looks pretty
> > >reasonable, although I'd rather not have to pull more GHES stuff into aer.c
> > >(ghes.h and ghes_estatus_pool_region_free()).
> > >
> > >What I had in mind was to put a queue of aer_capability_regs on the PCI side
> > >that could be used by both the APEI path and the native path.
> > >
> > >In the APEI path, platform firmware reads the error information from the
> > >hardware, and it feeds into PCI AER via aer_recover_queue().
> > >
> > >In the native path, Linux should be reading reads the same error information
> > >from the hardware, but it feeds into PCI AER quite differently, via
> > >aer_process_err_devices() and handle_error_source().
> > >
> > >These paths are fundamentally doing the exact same thing, but the data
> > >handling and dmesg logging are needlessly different. I'd like to see them get a
> > >little more unified, so the native path could someday also feed into
> > >aer_recover_queue().
> > >
> > >Does that make any sense?
> >
> > Thanks for letting us know.
> > Make sense, solution with in the AER looks better.
>
> Thanks for considering this. The AER rework I have in mind is a
> longer-term project, so unless you have time and interest in doing
> that, I think we should apply your patch since it's all ready to go.
>
> You pointed to the problem statement, but I think it would be good to
> include a brief outline directly in the commit log, e.g., something
> like this:

Agreed.

> ghes_handle_aer() passes AER data to the PCI core for logging and
> recovery by calling aer_recover_queue() with a pointer to struct
> aer_capability_regs.
>
> The problem was that aer_recover_queue() queues the pointer directly
> without copying the aer_capability_regs data. The pointer was to
> the ghes->estatus buffer, which could be reused before
> aer_recover_work_func() reads the data.
>
> To avoid this problem, allocate a new aer_capability_regs structure
> from the ghes_estatus_pool, copy the AER data from the ghes->estatus
> buffer into it, pass a pointer to the new struct to
> aer_recover_queue(), and free it after aer_recover_work_func() has
> processed it.
>
> What's your take on this, Rafael?

I can apply it if the changelog is updated along the lines of the above.

> The biggest change is in
> drivers/acpi, so if you want to take it, feel free to add my:
>
> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>

Thanks!