Re: [PATCH 2/2] media: i2c: Add ROHM BU64754 Camera Autofocus Actuator

From: Kieran Bingham
Date: Mon Sep 18 2023 - 06:37:09 EST


Quoting Dave Stevenson (2023-09-18 11:16:47)
> Hi Kieran
>
> On Fri, 15 Sept 2023 at 20:19, Kieran Bingham
> <kieran.bingham@xxxxxxxxxxxxxxxx> wrote:
> >
> > Hi Dave,
> >
> > Quoting Dave Stevenson (2023-09-15 18:44:02)
> > > Hi Kieran
> > >
> > > On Fri, 15 Sept 2023 at 18:02, Kieran Bingham
> > > <kieran.bingham@xxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > Add support for the ROHM BU64754 Motor Driver for Camera Autofocus. A
> > > > V4L2 Subdevice is registered and provides a single
> > > > V4L2_CID_FOCUS_ABSOLUTE control.
> > > >
> > > > Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> > > > ---
> > > > MAINTAINERS | 1 +
> > > > drivers/media/i2c/Kconfig | 13 ++
> > > > drivers/media/i2c/Makefile | 1 +
> > > > drivers/media/i2c/bu64754.c | 308 ++++++++++++++++++++++++++++++++++++
> > > > 4 files changed, 323 insertions(+)
> > > > create mode 100644 drivers/media/i2c/bu64754.c
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index f43e0ffcaf56..fd244560c317 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -18576,6 +18576,7 @@ L: linux-media@xxxxxxxxxxxxxxx
> > > > S: Maintained
> > > > T: git git://linuxtv.org/media_tree.git
> > > > F: Documentation/devicetree/bindings/media/i2c/rohm,bu64754.yaml
> > > > +F: drivers/media/i2c/bu64754.c
> > > >
> > > > ROHM MULTIFUNCTION BD9571MWV-M PMIC DEVICE DRIVERS
> > > > M: Marek Vasut <marek.vasut+renesas@xxxxxxxxx>
> > > > diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> > > > index 74ff833ff48c..b7b8004816ed 100644
> > > > --- a/drivers/media/i2c/Kconfig
> > > > +++ b/drivers/media/i2c/Kconfig
> > > > @@ -641,6 +641,19 @@ config VIDEO_AK7375
> > > > capability. This is designed for linear control of
> > > > voice coil motors, controlled via I2C serial interface.
> > > >
> > > > +config VIDEO_BU64754
> > > > + tristate "BU64754 Motor Driver for Camera Autofocus"
> > > > + depends on I2C && VIDEO_DEV
> > > > + select MEDIA_CONTROLLER
> > > > + select VIDEO_V4L2_SUBDEV_API
> > > > + select V4L2_ASYNC
> > > > + select V4L2_CCI_I2C
> > > > + help
> > > > + This is a driver for the BU64754 Motor Driver for Camera
> > > > + Autofocus. The BU64754 is an actuator driver IC which can
> > > > + control the actuator position precisely using an internal
> > > > + Hall Sensor.
> > >
> > > I can't find any data on this driver.
> > > Is it still expecting a VCM and hence near instantaneous movement? I
> > > was noting your comment on the hall sensor and thinking you
> > > potentially needed to be able to report whether the target position
> > > had been reached or not. Michael's series at [1] was trying to address
> > > that.
> >
> > The hall sensor is internal. The component description is just a
> > slightly fixed grammar of the product brief.
> >
> > As I understand it, this is a VCM yes but I have so little visibility.
>
> Fair enough, should be quick enough not to make too much difference then.

I think so yes. The world would be fantastic if we could ever actually
get the right documentation but ... ho hum ;-)


>
> > >
> > > [1] https://patchwork.linuxtv.org/project/linux-media/cover/20230406-feature-controls-lens-v2-0-faa8ad2bc404@xxxxxxxxxxxxxx/
> > >
> > > > +
> > > > config VIDEO_DW9714
> > > > tristate "DW9714 lens voice coil support"
> > > > depends on I2C && VIDEO_DEV
> > > > diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> > > > index 80b00d39b48f..e62aa0df7b1a 100644
> > > > --- a/drivers/media/i2c/Makefile
> > > > +++ b/drivers/media/i2c/Makefile
> > > > @@ -22,6 +22,7 @@ obj-$(CONFIG_VIDEO_AR0521) += ar0521.o
> > > > obj-$(CONFIG_VIDEO_BT819) += bt819.o
> > > > obj-$(CONFIG_VIDEO_BT856) += bt856.o
> > > > obj-$(CONFIG_VIDEO_BT866) += bt866.o
> > > > +obj-$(CONFIG_VIDEO_BU64754) += bu64754.o
> > > > obj-$(CONFIG_VIDEO_CCS) += ccs/
> > > > obj-$(CONFIG_VIDEO_CCS_PLL) += ccs-pll.o
> > > > obj-$(CONFIG_VIDEO_CS3308) += cs3308.o
> > > > diff --git a/drivers/media/i2c/bu64754.c b/drivers/media/i2c/bu64754.c
> > > > new file mode 100644
> > > > index 000000000000..3367b6f17660
> > > > --- /dev/null
> > > > +++ b/drivers/media/i2c/bu64754.c
> > > > @@ -0,0 +1,308 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * The BU64754 is an actuator driver IC which can control the
> > > > + * actuator position precisely using an internal Hall Sensor.
> > > > + */
> > > > +
> > > > +#include <linux/delay.h>
> > > > +#include <linux/i2c.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/pm_runtime.h>
> > > > +#include <linux/regulator/consumer.h>
> > > > +
> > > > +#include <media/v4l2-cci.h>
> > > > +#include <media/v4l2-ctrls.h>
> > > > +#include <media/v4l2-device.h>
> > > > +
> > > > +#define BU64754_REG_ACTIVE CCI_REG16(0x07)
> > > > +#define BU64754_ACTIVE_MODE 0x8080
> > > > +
> > > > +#define BU64754_REG_SERVE CCI_REG16(0xd9)
> > > > +#define BU64754_SERVE_ON 0x0404
> > > > +
> > > > +#define BU64754_REG_POSITION CCI_REG16(0x45)
> > > > +#define BU64753_POSITION_MAX 1023 /* 0x3ff */
> > > > +
> > > > +#define BU64754_POWER_ON_DELAY 800 /* uS : t1, t3 */
> > > > +
> > > > +struct bu64754 {
> > > > + struct device *dev;
> > > > +
> > > > + struct v4l2_ctrl_handler ctrls_vcm;
> > > > + struct v4l2_subdev sd;
> > > > + struct regmap *cci;
> > > > +
> > > > + u16 current_val;
> > > > + struct regulator *vdd;
> > > > + struct notifier_block notifier;
> > > > +};
> > > > +
> > > > +static inline struct bu64754 *sd_to_bu64754(struct v4l2_subdev *subdev)
> > > > +{
> > > > + return container_of(subdev, struct bu64754, sd);
> > > > +}
> > > > +
> > > > +static int bu64754_set(struct bu64754 *bu64754, u16 position)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + ret = cci_write(bu64754->cci, BU64754_REG_POSITION, position, NULL);
> > > > + if (ret) {
> > > > + dev_err(bu64754->dev, "Set position failed ret=%d\n", ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int bu64754_active(struct bu64754 *bu64754)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + /* Power on */
> > > > + ret = cci_write(bu64754->cci, BU64754_REG_ACTIVE, BU64754_ACTIVE_MODE,
> > > > + NULL);
> > > > + if (ret < 0) {
> > > > + dev_err(bu64754->dev, "Failed to set active mode ret = %d\n",
> > > > + ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + /* Serve on */
> > > > + ret = cci_write(bu64754->cci, BU64754_REG_SERVE, BU64754_SERVE_ON,
> > > > + NULL);
> > > > + if (ret < 0) {
> > > > + dev_err(bu64754->dev, "Failed to enable serve ret = %d\n",
> > > > + ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + return bu64754_set(bu64754, bu64754->current_val);
> > > > +}
> > > > +
> > > > +static int bu64754_standby(struct bu64754 *bu64754)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + cci_write(bu64754->cci, BU64754_REG_ACTIVE, 0, &ret);
> > > > + if (ret < 0)
> > > > + dev_err(bu64754->dev, "Failed to set active mode ret = %d\n",
> > > > + ret);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static int bu64754_regulator_event(struct notifier_block *nb,
> > > > + unsigned long action, void *data)
> > > > +{
> > > > + struct bu64754 *bu64754 = container_of(nb, struct bu64754, notifier);
> > > > +
> > > > + if (action & REGULATOR_EVENT_ENABLE) {
> > > > + /*
> > > > + * Initialisation delay between VDD low->high and availability
> > > > + * i2c operation.
> > > > + */
> > > > + usleep_range(BU64754_POWER_ON_DELAY,
> > > > + BU64754_POWER_ON_DELAY + 100);
> > > > +
> > > > + bu64754_active(bu64754);
> > > > + } else if (action & REGULATOR_EVENT_PRE_DISABLE) {
> > > > + bu64754_standby(bu64754);
> > > > + }
> > >
> > > Presumably this is based on the assumption that the same regulator
> > > controls sensor and lens, so when the sensor is powered up the lens
> > > position gets restored.
> > > I'm sure when I suggested doing the same previously it was shot down
> > > in flames ... found it [2]
> > >
> > > Personally I think it makes sense that the lens powers up
> > > automagically, and have almost exactly the same code as this in a
> > > couple of our VCM drivers, but others disagree.
> >
> > I've tested this on the Raspberry Pi, and I expect this design model
> > comes from you originally then. I thought it was a good way to handle
> > things, but I wasn't aware that others had already disagreed.
> >
> > Being a module that will connect over the RPi interface, with a single
> > POWER_EN, indeed - the regulators are shared with the camera, and
> > synchronising how it is handled seemed reasonable. I guess I have some
> > more reading to do now then.
>
> Personally I like it as it simplifies userspace for some simple cases,
> and has no impact on the complex ones which always open the lens
> driver subdev for themselves. Let's see what other people think.

Yes, and ensures that if someone opens the camera (powers up all the
shared regulators) the driver gets a notification and can 'do the right
thing' ... like either move to a known position or a low power position,
or the last configured position. Anything that's expected...

> > I'm already thinking about making a 'simple-vcm' module or parent-driver
> > that can reduce the boilerplate for the vcms though. There's very little
> > difference between them all ... and I think they could be abstracted out
> > substantially to simplify adding new devices.
>
> Reducing boilerplate is always nice!

Having looked around the VCMs in both mainline and the RPi kernel -
there really is a lot duplicated 'for a device with a single control' -
so i've sketched out a simple-vcm at the weekend, but I won't be able to
continue that until next weekend now. I hope it will make things nicer.

I'll probably see if we can move all lens drivers to media/i2c/lens/*
too - media/i2c is getting crowded with lots of hard to identify 'part
numbers'. I think we could do better organising there.

I'd probably also move sensor drivers to media/i2c/sensor/ or even as
far as media/i2c/sensor/{sony,omnivision,$vendor}/, .... particularly if
we're going to get larger number of drivers for all these parts now
there's more framework to support them.

And then I'd love to see if we could reduce sensor boilerplate too and
have a v4l2-sensor 'class'. I'll start with the 'easy' vcm first though
;-)

--
Kieran


>
> Dave
>
> > --
> > Kieran
> >
> >
> >
> > >
> > > Dave
> > >
> > > [2] https://lore.kernel.org/all/CAPY8ntBZpZjecHNCMf-eMefcp2EgmbqkXMt4p=UeOe0n-o8WrA@xxxxxxxxxxxxxx/
> > >
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int bu64754_set_ctrl(struct v4l2_ctrl *ctrl)
> > > > +{
> > > > + struct bu64754 *bu64754 = container_of(ctrl->handler,
> > > > + struct bu64754, ctrls_vcm);
> > > > +
> > > > + if (ctrl->id == V4L2_CID_FOCUS_ABSOLUTE) {
> > > > + bu64754->current_val = ctrl->val;
> > > > + return bu64754_set(bu64754, ctrl->val);
> > > > + }
> > > > +
> > > > + return -EINVAL;
> > > > +}
> > > > +
> > > > +static const struct v4l2_ctrl_ops bu64754_vcm_ctrl_ops = {
> > > > + .s_ctrl = bu64754_set_ctrl,
> > > > +};
> > > > +
> > > > +static int bu64754_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> > > > +{
> > > > + return pm_runtime_resume_and_get(sd->dev);
> > > > +}
> > > > +
> > > > +static int bu64754_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> > > > +{
> > > > + pm_runtime_put(sd->dev);
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static const struct v4l2_subdev_internal_ops bu64754_int_ops = {
> > > > + .open = bu64754_open,
> > > > + .close = bu64754_close,
> > > > +};
> > > > +
> > > > +static const struct v4l2_subdev_ops bu64754_ops = { };
> > > > +
> > > > +static void bu64754_subdev_cleanup(struct bu64754 *bu64754)
> > > > +{
> > > > + v4l2_async_unregister_subdev(&bu64754->sd);
> > > > + v4l2_ctrl_handler_free(&bu64754->ctrls_vcm);
> > > > + media_entity_cleanup(&bu64754->sd.entity);
> > > > +}
> > > > +
> > > > +static int bu64754_init_controls(struct bu64754 *bu64754)
> > > > +{
> > > > + struct v4l2_ctrl_handler *hdl = &bu64754->ctrls_vcm;
> > > > + const struct v4l2_ctrl_ops *ops = &bu64754_vcm_ctrl_ops;
> > > > +
> > > > + v4l2_ctrl_handler_init(hdl, 1);
> > > > +
> > > > + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_FOCUS_ABSOLUTE,
> > > > + 0, BU64753_POSITION_MAX, 1, 0);
> > > > +
> > > > + bu64754->current_val = 0;
> > > > +
> > > > + bu64754->sd.ctrl_handler = hdl;
> > > > + if (hdl->error) {
> > > > + dev_err(bu64754->dev, "%s fail error: 0x%x\n",
> > > > + __func__, hdl->error);
> > > > + return hdl->error;
> > > > + }
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int bu64754_probe(struct i2c_client *client)
> > > > +{
> > > > + struct bu64754 *bu64754;
> > > > + int ret;
> > > > +
> > > > + bu64754 = devm_kzalloc(&client->dev, sizeof(*bu64754), GFP_KERNEL);
> > > > + if (!bu64754)
> > > > + return -ENOMEM;
> > > > +
> > > > + bu64754->dev = &client->dev;
> > > > +
> > > > + bu64754->cci = devm_cci_regmap_init_i2c(client, 8);
> > > > + if (IS_ERR(bu64754->cci)) {
> > > > + dev_err(bu64754->dev, "Failed to initialize CCI\n");
> > > > + return PTR_ERR(bu64754->cci);
> > > > + }
> > > > +
> > > > + bu64754->vdd = devm_regulator_get_optional(&client->dev, "vdd");
> > > > + if (IS_ERR(bu64754->vdd)) {
> > > > + if (PTR_ERR(bu64754->vdd) != -ENODEV)
> > > > + return PTR_ERR(bu64754->vdd);
> > > > +
> > > > + bu64754->vdd = NULL;
> > > > + } else {
> > > > + bu64754->notifier.notifier_call = bu64754_regulator_event;
> > > > +
> > > > + ret = regulator_register_notifier(bu64754->vdd,
> > > > + &bu64754->notifier);
> > > > + if (ret) {
> > > > + dev_err(bu64754->dev,
> > > > + "could not register regulator notifier\n");
> > > > + return ret;
> > > > + }
> > > > + }
> > > > +
> > > > + v4l2_i2c_subdev_init(&bu64754->sd, client, &bu64754_ops);
> > > > + bu64754->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > > > + bu64754->sd.internal_ops = &bu64754_int_ops;
> > > > + bu64754->sd.entity.function = MEDIA_ENT_F_LENS;
> > > > +
> > > > + ret = bu64754_init_controls(bu64754);
> > > > + if (ret)
> > > > + goto err_cleanup;
> > > > +
> > > > + ret = media_entity_pads_init(&bu64754->sd.entity, 0, NULL);
> > > > + if (ret < 0)
> > > > + goto err_cleanup;
> > > > +
> > > > + ret = v4l2_async_register_subdev(&bu64754->sd);
> > > > + if (ret < 0)
> > > > + goto err_cleanup;
> > > > +
> > > > + if (!bu64754->vdd)
> > > > + pm_runtime_set_active(&client->dev);
> > > > +
> > > > + pm_runtime_enable(&client->dev);
> > > > + pm_runtime_idle(&client->dev);
> > > > +
> > > > + return 0;
> > > > +
> > > > +err_cleanup:
> > > > + v4l2_ctrl_handler_free(&bu64754->ctrls_vcm);
> > > > + media_entity_cleanup(&bu64754->sd.entity);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static void bu64754_remove(struct i2c_client *client)
> > > > +{
> > > > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > + struct bu64754 *bu64754 = sd_to_bu64754(sd);
> > > > +
> > > > + if (bu64754->vdd)
> > > > + regulator_unregister_notifier(bu64754->vdd,
> > > > + &bu64754->notifier);
> > > > +
> > > > + pm_runtime_disable(&client->dev);
> > > > +
> > > > + bu64754_subdev_cleanup(bu64754);
> > > > +}
> > > > +
> > > > +static int __maybe_unused bu64754_vcm_suspend(struct device *dev)
> > > > +{
> > > > + struct i2c_client *client = to_i2c_client(dev);
> > > > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > + struct bu64754 *bu64754 = sd_to_bu64754(sd);
> > > > +
> > > > + if (bu64754->vdd)
> > > > + return regulator_disable(bu64754->vdd);
> > > > +
> > > > + return bu64754_standby(bu64754);
> > > > +}
> > > > +
> > > > +static int __maybe_unused bu64754_vcm_resume(struct device *dev)
> > > > +{
> > > > + struct i2c_client *client = to_i2c_client(dev);
> > > > + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> > > > + struct bu64754 *bu64754 = sd_to_bu64754(sd);
> > > > +
> > > > + if (bu64754->vdd)
> > > > + return regulator_enable(bu64754->vdd);
> > > > +
> > > > + return bu64754_active(bu64754);
> > > > +}
> > > > +
> > > > +static const struct of_device_id bu64754_of_table[] = {
> > > > + { .compatible = "rohm,bu64754", },
> > > > + { /* sentinel */ }
> > > > +};
> > > > +
> > > > +MODULE_DEVICE_TABLE(of, bu64754_of_table);
> > > > +
> > > > +static SIMPLE_DEV_PM_OPS(bu64754_pm, bu64754_vcm_suspend, bu64754_vcm_resume);
> > > > +
> > > > +static struct i2c_driver bu64754_i2c_driver = {
> > > > + .driver = {
> > > > + .name = "bu64754",
> > > > + .pm = &bu64754_pm,
> > > > + .of_match_table = bu64754_of_table,
> > > > + },
> > > > + .probe = bu64754_probe,
> > > > + .remove = bu64754_remove,
> > > > +};
> > > > +
> > > > +module_i2c_driver(bu64754_i2c_driver);
> > > > +
> > > > +MODULE_AUTHOR("Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>");
> > > > +MODULE_DESCRIPTION("ROHM BU64754 VCM driver");
> > > > +MODULE_LICENSE("GPL");
> > > > --
> > > > 2.34.1
> > > >